I have just installed ubuntu 11.04. Now I have installed, from the language support, the bengali language. And now select input method as ibus. Now when I am going to ibus preference to select input method, it is not showing any language, except chinese, which was installed by default. I am using ubuntu 11.04X64 bit version
View 2 Replies
how to get IBus input methods to work in Adobe Flash Player? I want to type foreign characters in SharedTalk, a language exchange website which unfortunately runs entirely on Flash, but pressing ctrl-space to activate IBus does nothing and I can only type in Latin characters.
Or if it's possible by using something other than ibus, I'd also be interested.
I did a search but I can only find threads like [URL]this which refer to older Flash versions and claim that it's fixed now.
I switched to pure LXDE desktop in my Ubuntu and now my Keyboard Input Methods dialog doesn't show up. When I click on the menu item nothing happens. The Preferences menu item in the keyboard icon in the panel doesn't work either.
View 9 Replies View RelatedI can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
For years I have been using scim-anthy for Japanese input under Linux. However just moving to ubuntu 10.10 I noticed that the development for scim has ceased and lots of people recommend moving to ibus. So I tried: I got ibus and ibus-anthy installed. I choose ibus as keyboard method input system under System->Adminsitration->Language Support ibus is up and running. I can see the icon. In ibus opreferences I added anthy under Input methods. I restarted X resp. the whole computer. I can choose Japanese-Anthy when clicking on the ibus icon. But nothing happens. I am still writing latin characters, no anthy popped up (like it used with scim), nothing.
View 2 Replies View RelatedI recently installed gnome 3, using the ppa -> dist-upgrade -> install gnome-shell method. IBus used to work fine with gnome 2.3 and unity, but in gnome 3, the icon is still there, the deamon is still running (I presume) but no matter where i click, it always shows 'no input window'... (for example, i can't type anything other than English here...).
View 6 Replies View RelatedI am running Debian 8.2 (Jessie) with KDE 4.14.2. I use ibus to enter CJK characters. ibus is setup "the manual way" from URL....
Code: Select allexport GTK_IM_MODULE=ibus
export XMODIFIERS=@im=ibus
export QT_IM_MODULE=ibus
CJK input via ibus works for Qt4 applications such as Kate and Kwrite.However, CJK input via ibus does not work automatically with Qt5 applications, such as sqlitebrowser. I can get ibus running with Qt5 applications if I launch the application from the console like this:
Code: Select allQT_IM_MODULE=ibus sqlitebrowser
Is there way I can get ibus working with Qt5 applications automically without needing to add "QT_IM_MODULE=ibus" all the time?
I just heard about the newly developed input method IBUS (ibus - Project Hosting on Google Code) the other day. Supposedly, it fixes a number of problems of SCIM (which, unfortunately, is pretty much dead upstream), and both Ubuntu and Fedora are moving toward making IBUS the standard input on their systems.
Interestingly, there's nothing on the openSUSE forums yet, so this thread is supposed to fill the void and become, eventually, a how-to guide for running IBUS on openSUSE 11.2. I've tried to get IBUS running the past few days, but without succcess so far. Perhaps some of you how got it up and running already can help me out?
[Code]...
The IBUS website also mentions the repository Index of /repositories/home:/swyear for openSUSE, but as far as I can see, the IBUS files don't exist there anymore.
After upgrading to Kubuntu 10.10 the icon for the ibus input method is not showing up anymore.
I checked the ibus-daemon is running, but I have no idea how to use ibus without an icon.
How to make all program use Anthy input by default? because if i use ctrl space to activate,it just activate in one program only.
View 7 Replies View Relatedafter i update the input method, the input method could not be trigger
View 3 Replies View RelatedWhen I install I never select language support other than English, yet the system gets loaded with a bunch of fonts and input methods for various Eastern languages and I spend time taking them out.Why are they getting installed at all?
View 7 Replies View RelatedI work with python and I use emacs as my IDE tool. I have been running Debian Squeeze (6.0.9) for some time now with emacs 23.2.1 and ecb 2.32. I am able to access my python methods in the ecb-methods window with no problems. However I recently upgraded my desktop to Debian Wheezy (7.5) running emacs 23.4.1 and ecb 2.40 but I have lost access to the methods in the ecb-methods window. The window is just empty while the others (directories, sources and history) are all populated. I have a second laptop which I decided to upgrade to Debian Jessie, however Jessie recommends emacs 23.4.1 which is running with ecb 2.40 also. The result is the same as on Wheezy.
I have used the ecb menus and googled for a solution or even just a mention that such a problem exists but have come up with nothing. Either I have a unique situation here or am doing something really dumb.
I would like to upgrade to Wheezy or Jessie but I need access to methods in the ecb methods window. How to keep my upgrade and see the methods in the methods window of the ecb system ....
I install ibus through "yum install ibus *"and i can't it through call "ctrl +space" why?i use fedora 10.
View 1 Replies View Relatedbut now I've found an area where linux - or at least Ubuntu - just isn't in the game: inputting Chinese into documents. I've spent half a day trying to get iBus and SCIM to work, and not getting anywhere.
For those who don't yet understand, iBus and SCIM are alternative methods of entering western letters and being able to input a Chinese character in a document. It also works for other languages, like Japanese and Vietnamese, but I'm into Chinese, specifically Simplified Chinese.
On my Mac, I configured the machine for Chinese input and it just worked. Even on my wife's Windows machine, I configured the machine for Chinese input and it just worked. Not so on my linux - Ubuntu 10.04 - box. It just didn't work.
Nineteen times out of twenty I couldn't get the keyboard icon to display. When I did, I couldn't get it to select an input method (except once). And that once I couldn't get it to input anything. Most of the time it let me know that there was no input window, although I had both LibreOffice and Gtext windows open.
but I'll try again in a few years. It's going to take at least that long to make iBus and SCIM work. Normally I find that if I can do it on the Mac or in Windows, I can do it in linux, but this is one area where there's a lot of work yet to be done.
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
Ibus is very familiar to some users. And they find only one way to use Ibus as their keyboard layout. But its not possible to use ibus on Maverick Meerkat by default. you need to follow some instruction to do that. Here I am telling how I have done this...
Go to System> Administration> Synaptic Package Manager (you have to give your password) type " ibus-m17 " on search box. then just install the one appears. After installation the package, just close the synaptic. Now you are done to use Ibus.
Now go to System>Administration>Language Support (it may ask you to install the Language support, just click on the "Remind me later") Then select ' ibus ' from the "Keyboard input method system" under the Language tab.
Then close the window and restart the PC.
Thats the work I have done to get the iBus on Maverick Meerkat.
Kubuntu 10.10 new install fully updated. Installed KDE 4.5.3 from Kubuntu PPA repo. Then installed Japanese language support. Two iBus icons are showing up in the KDE systray. One appears to be inactive when switching input method to Japanese. Known bug? Freak of nature? Workaround available?
View 1 Replies View RelatedI type Chinese using ibus, but it dosen't seem to work at all with skype, is there anything I can do to get it working? Ibus isen't working for me in libre office either.
View 9 Replies View RelatedIn my Ubuntu 11.04, the IBus Indicator does not show. How to correct it?
View 2 Replies View RelatedIm trying to get iBus daemon to start on boot, but cant seem to do it. In the Desktop Session Settings window iBus is not listed in the start up programs and there is no option to start in on boot in the iBus preferences window. How do I tell my computer to start it up when I boot?
View 4 Replies View RelatedIs there any other different new downloading methods on ubuntu besides torrents? I know newsgroup I used it on windows but anything for free? I've tried the free newsgroup server with sabnzbd but those are useless now since they don't work. I was reading about rss feed nzb downloading? how does that work?
View 2 Replies View RelatedNo matter what I do, i cannot get port 3100 to open. This is for a new MMO i am CBT on. I know it works on windows because that is how I installed it and played. But I prefer being on Linux. Majority of all other MMOs work fine. Just this one has to have udp 3100 open.
The following is a rough output of all the methods I have tried with no success. As you can see I have done some extensive research first before posting here.
Now its become a lil bit of an obsession.
I cannot get the following command to work:
And yes I tried the "spaces" in different places thinking that was the prob. So i cannot see if 3100 is in the list or not
I eventually turned on the firewall "ufw enable" add the port there, and output:
Some references
[url]
Firewall stuff: [url]
I even manually went into the router and turned it on there.
I add these lines for startup purposes.
Do I need to do something in "wine" ?
I feel i am starting to repease myself
results of "iptables -L"
Code:
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 Replies View RelatedI would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
In Ubuntu 10.10 how to add the languages other than English . Only English and Chineese are available now. I would like to add my mothertongue Malayalam on it. Malayalam is available on languages.
View 4 Replies View RelatedQuickly the software sources are broken apparently. the apt.... -f failed to fix it, the synaptic version of fix broken.... fails here is the output in terminal.
Code:
I am trying out IBUS input method as it was recently recommended as an alternative to google pinyin for Linux Need OpenSuse Package for SCIM Google Pinyin (Chinese Input). However I have come across a problem installing on my laptop. I uninstalled SCIM and installed IBUS but now I have lost functionality of my mouse trackpad and my keyboard.
OpenSuse 11.3
KDE 4.5.2
I run Fedora. I use the Ibus input method. After recent updates, the character ,zhe = English -ing ending comes out wrong.(See, even here it is wrong, if you have Chinese enabled)
View 14 Replies View RelatedI have to execute certain commands (like shutdown Tomcat) on several servers so I'm using a loop and ssh. I put the server's IP on a CSV file which I parse, execute the commands for each line and send the output to a file. The problem is that after processing one line the program stops execution. I wonder if someone could lend me a hand with this, I'm new in bash scripting and I ran out of ideas.
The CSV (servers.csv) file looks like this:
Code:
192.168.254.5:Server 1
192.168.254.6:Server 2
...
And the script looks like this:
Code:
#!/bin/bash
while IFS=: read ip name
do
sshpass -p "pass" ssh -o "StrictHostKeyChecking no" root@"$ip" 'sh <CATALINA_BASE>/bin/shutdown.sh' >> output.log
done < servers.csv
