I just downloaded the iso and put it on a usb with the usb installer but my pc wouldn't load it kept saying boot error and I made sure it was 1st boot option and still didn't work and now I am trying to install it by "wubi.exe" and its saying .... "there is no disk in the drive. Please insert a disk into drivedeviceharddisk1dr1".
View 5 RepliesI have an Acer Aspire One Netbook running Ubuntu Netbook Remix 9.10. Previously it worked fine. Now when I try to boot it, it displaysGRUB loading.error: unknown filesystemgrub rescue>It will happily boot a Live USB so it's still usable - but I want to get my data off it. So far I have been unable to mount the drive, but I am still a novice at using the command line, so I may just be making a mistake.Here is some of the output from the Terminal running off a Ubuntu Netbook Remix 9.10 Live USB stick:ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 8069MB, 8069677056 bytes
255 heads, 63 sectors/track, 981 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
I have a laptop with important data (no backup) that will not boot. It's a vanilla Debian 6 amd64 with dm-crypt LUKs encryption to a internal sata drive partitioned sda1 sda2 sda5 with lvm2 formatted ext3 for sda5. The symptom is that upon powering up, it progresses (albeit slowly now) past grub, to the point where the the "Enter passphrase" prompt occurs. After entering the phrase, it pauses with "Reading all physical volumes. This may take a while". It seems to work, but then gives me errors like:
ata3.00: status: {DRDY ERR }
ata3.00: error: { UNC }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: failed command READ DMA EXT
...some more stuff...
end_request: I/O error:, dev sda, sector 308725410
JBD: Failed to read block at offset 24711
EXT3-fs: error loading journal
and it drops me to Busybox ash shell. My impression is that the sda1 partition with the kernel is intact, but the sda2 or sda5 is bad.
What else I have done:
1. Removed problem disk and installed it into another known good laptop. Issue occurs with new laptop. So, I would assume hd is bad, laptop is good.
2. Booted from hd using grub rescue mode. Similar errors occurred.
3. Using suspect laptop and hd, booted into a live cd environment, which attempted to mount the encrypted drive. It prompted for the passphrase, but said it could not mount the drive.
One of the recent system updates to my 10.04 system has stuffed the boot
I get the following error:-
error while loading shared libraries /lib/libply-boot-client.so.2
I have searched the forum and found reference to this problem back in April / March this year, just wondering why I have hit it with the latest updates. I always keep up to date with updates, so strange I seem to be hitting an old problem.
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
Recently I bought the next notebook: Asus R510JF-DM020 i7-4720HQ
My hardware (extend ouput):
Code: Select all$ inxi -Fzx
System: Host: Asus-R510JF Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
Desktop: KDE Plasma 5.4.2 (Qt 5.5.1) Distro: Debian GNU/Linux stretch/sid
Machine: Mobo: ASUSTeK model: X550JF v: 1.0 Bios: American Megatrends v: X550JF.203 date: 04/02/2015
CPU: Quad core Intel Core i7-4720HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20751
[Code] ....
I have an Intel DG33TL MB, Intel Core 2 Quad Q9650, 8GB SuperTalent DDR2-800, and 4 Seagate 500GB hard disks. The disks are connected to a 3Ware 9650SE-4LPML and set for RAID0. I partitioned the drive in the following manner: 900GB for XP-Pro x64 (first install), 100 GB XP-Pro (installed second), and the remaining for FC10. After installing FC10 x64 using downloaded DVD .iso I am getting the following error on reboot:
Code:
Reading all physical volumes. This may take a while...
Volume group "VolGroup00" not found.
[code]....
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View RelatedI recently setup a new server that serves files over samba and is a subversion repository for a number of projects. I did a simple apt-get update/upgrade for which the system requested a reboot. After I rebooted, I got to the login prompt, at which point I ran into a problem. After I enter my correct credentials, it spits out the following error:
sh: error while loading shared libraries libc.so.6: cannot open shared object file: Error 24
and returns me to the login prompt. Samba and Subversion are both still working, I simply can't login to the server either physically or via SSH.
What steps should I be taking to correct this issue? My thoughts are that I may need to use a Live CD to load the system and perhaps do another update, but before I go through that process I just wanted to check in and see if there might be some other solution.
I have tried googling the issue, and while I have seen other posts regarding shared library issues, there was never anything about not being able to login and I never did find anything specific to the error message I received.
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]
View 2 Replies View RelatedI have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
Just trying to install Skype on Fedora 12 .. but got an error: skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory So, anyone got it working there ?
View 9 Replies View RelatedI have a long running 9.10 installation. All of a sudden, on boot, I get this error: "loading initial ramdisk error: file not found" If I hit 'E' at the menu entry, I can scroll all the way to the end of the boot command, and it appears that the last 'c' on 'generic' is missing from the kernel name. If I add the c and hit ctrl-x it boots fine. The grub.cfg appears to be correct, it has the full generic spelled out.
View 9 Replies View RelatedI have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedI need to flash my BIOS to get rid of an error: "Intel uCode loading error". On [URL] I have found a tutorial, that looks to be fine. I can even see in the comments, that somebody have done this with success from Ubuntu 9.04, the very same system, that I use. Nevertheless I cannot make this bootCD with my Ubuntu 9.04, as it doesn't know the loop option to mount the image.
In the tutorial it says: "Requirements for this step is that you have support for the vfat and loop file systems in the kernel. Or you can have those features compiled as modules. In the latter case you can load the modules before the next step, like this:
modprobe vfat
modprobe loop"
loop doesn't seem to be present in my system, and the command modprobe loop returns an error that the module is not available. I tried to follow the tutorial anyway, but with no success. How can I get the module lopp? I also want to use it to make iso images bootsble from the harddisk.
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
I tried to download two AV programmes AVG and Clamwin, both gave me an Error message?
Quote:
Archive: /home/jacob/Downloads/clamwin-0.96.4-setup.exe
[/home/jacob/Downloads/clamwin-0.96.4-setup.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/jacob/Downloads/clamwin-0.96.4-setup.exe or /home/jacob/Downloads/clamwin-0.96.4-setup.exe.zip, and cannot find /home/jacob/Downloads/clamwin-0.96.4-setup.exe.ZIP, period.
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading.
error: no such partition
grub rescue> _
Have I killed my computer or is there some way I can fix it?
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
GRUB loading.
error: no such disck
grub rescue>
I had been running a dual boot windows XP & Ubuntu. Graboid worked in both systems. I have now got rid of windows, upgraded to 10.10
I installed wine, winetricks & dotnet20, but when I click on my downloaded Graboid.exe file I get the following error:
Command line output code...
I applied all updates to my Kubuntu 10.04 installation, and shutdown and went to bed. Booted up this morning and found:
[code]...
This error is returned if the module load command is used before loading a Multiboot kernel. It only makes sense in this case anyway, as GRUB has no idea how to communicate the presence of location of such modules to a non-Multiboot-aware kernel. lets re-install GRUB. So I booted up my live CD, and ran:
sudo GRUB
find /boot/grub/stage1
root (hd0,0)
setup (hd0)
quit
sudo shutdown -r now
Same error. So I started looking around, and most complaints of this particular error seem to be dual boot environments, which I found rather odd, as I have never dual booted this machine.....
I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?
View 1 Replies View RelatedI have had to replace the hard drive in the laptop I am using so a fresh installation of Ubuntu 10.04 has gone on, I am unable to get the wireless to start unless I type the following in termial
Quote:
sudo modprobe -rv ath5k
sudo modprobe acer-wmi
sudo modprobe -v ath5k
I put this into a file previously and it ran on boot however I cannot remember how I did it
after installing Xp i recover boot loader. but it not boot Xp. it seen Xp but not going to it. only load Ubunto (9.04) here is my grub loder file
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[code]....
I had win7 on my laptop. Before sometime I install Ubuntu 9.10 and it worked fine. Bur later that I resize the partition using third party software. Now when I restart the system it is giving me an error
GRUB Loading
error: unknown filesystem
grub rescue>
I am not able to access the harddrive. I am very new to ubuntu.
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies View RelatedThe follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies View Related