Ubuntu :: Expand Raid Array. Now Have "no Space Left On Device"?
Aug 14, 2011
I have been using Natty (11.04) for a while with a 3disk RAID5 via MDADM and all have been ok.I have just stuck in another disk using: mdadm /dev/md0 --add /dev/sdb, then mdadm --grow /dev/md --raid-devices=4I then resize2fs /dev/md0all seemed ok until i tried "tail -f /var/log/syslog" and was given:tail: cannot watch `/var/log/syslog': No space left on devicedf -h gives me loads of space freedf -i no problemsany i have an expensive lump parts just sitting here doing nothing.
View 9 Replies
ADVERTISEMENT
Mar 16, 2010
I recently upgraded from Lucid to Maverick, which went fairly smooth. Then I upped my RAM with some new memory sticks (4Gb to 8Gb). Since about then, I'm seeing these errors in syslog:
Code:
Jun 6 22:23:52 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/tty2': No space left on device
Jun 6 22:23:59 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/pts/0': No space left on device
I also get errors when running "tail -f" as root:
Code:
tail: cannot watch `/var/log/syslog': No space left on device
I searched around and I found some other reports of the tail -f error, with the suggestion of increasing fs.inotify.max_user_watches. I set it to 16384, and that at first resolved the tail -f problem, but now I'm getting that error again even after upping max_user_watches.
I know swap is suggested to be approx. the same size as RAM, but with this upgrade RAM is now bigger than the 5.7G of swap.
View 3 Replies
View Related
Apr 21, 2010
i'm using Ubuntu virtual machine.latly, i've moved the VM image to other PC. something with the user privileges got wrong. i when i edit a file using nano for example from a simple user, it says: "no space left on device" but when i use
# sudo nano filename
it works.i used
#chmod 777 filename
and it still dosent work. i cant save/write to disk while i'm in the user account. but with sudo, or root account it works.
View 1 Replies
View Related
Jul 31, 2010
I have an WD 1TB external hard disk. When I try to write any file to it - even a 1kb text file - I get the message "no space left on device". I cannot write to the disk at all anymore - not files, not directories.The drive is formatted as an NTFS drive. I use F13. I can read from the drive without any apparent problem. Would anyone know what's causing this problem?
View 2 Replies
View Related
Apr 10, 2009
I am trying to copy some files onto a flash card. The first thing that i do is mount to the flash card:
mount /dev/sdc1 /mnt
then i try and copy a file
cp dev.bin /mnt
but i get a message saying:
cp: writing `/mnt/dev.bin': No space left on device
I was able to copy some files before but i cant seem to do it anymore.
how can i delete everything thats on the flash card so that i can copy files onto it?
View 3 Replies
View Related
Feb 11, 2010
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Yes I tried 'sudo dpkg --configure -a' Should I do a reinstall.
"Setting up initramfs-tools (0.92bubuntu53) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.31-17-generic
gzip: stdout: No space left on device update-initramfs: failed for /boot/initrd.img-2.6.31-17-generic dpkg: subprocess installed post-installation script returned error exit status 1"
View 3 Replies
View Related
Apr 20, 2010
I've just upgraded to kubuntu 9.10, and I'm getting strange errors when trying to copy files onto my MP3 player, a SANSA M250 (2GB). df claims it's at 57% capacity (and the figures make sense for that, as well as having about the quantity of music which half fills the SANSA) but when I try to copy a file - from the command line, from exaile, or with the file manager, I get a "No space left on device" error:
Code:
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 73939452 42184580 27998880 61% /
udev 512472 264 512208 1% /dev
none 512472 1752 510720 1% /dev/shm
none 512472 96 512376 1% /var/run
none 512472 0 512472 0% /var/lock
none 512472 0 512472 0% /lib/init/rw
/dev/sdc 1996000 1125056 870944 57% /media/SANSA M250
$ cp test.mp3 /media/SANSA M250/
CP: cannot create regular file `/media/SANSA M250/test.mp3': No space left on device
The MP3 being copied is 2MB in size so should fit easily.
There were no problems until upgrading, when I also moved from amarok to exaile - because amarok2 doesn't have the functionality I want from a player. But this happens even if exaile isn't running, so exaile shouldn't be the problem. How can I diagnose what's going on?
View 1 Replies
View Related
Mar 17, 2011
I am running Ubuntu 10.10 64. I have a RAID array consisting of two 1 TB HDD's, controlled by my on-board RAID controller. I have a dual-boot of Ubuntu 10.10 and Windows. The RAID array is mapped in /dev/mapper, and here is the output of sudo dmraid -ay
Code:
RAID set "pdc_dedfhcfdee" already active
RAID set "pdc_dedfhcfdee1" already active
RAID set "pdc_dedfhcfdee2" already active
RAID set "pdc_dedfhcfdee3" already active
[Code]....
View 2 Replies
View Related
Mar 15, 2016
Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 81G 27G 50G 35% /
devtmpfs 16G 0 16G 0% /dev
tmpfs 16G 76K 16G 1% /dev/shm
tmpfs 16G 18M 16G 1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem Size Used Avail Use% Mounted on
/dev/dm-0 907G 6.6G 855G 1% /
udev 10M 0 10M 0% /dev
tmpfs 995M 9.2M 986M 1% /run
tmpfs 2.5G 76K 2.5G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 2.5G 0 2.5G 0% /sys/fs/cgroup
[code]...
View 11 Replies
View Related
Jan 20, 2011
cp: writing `/tmp/tmpX2KZDc/system.image': No space left on device However, when I right-click on properties, I see it has 51 items, totalling only 130.5 KB!this is a dual boot system with Win XP and Ubuntu 10.10 (~58Gb partition)Quote:
anil@anil-HP-EliteBook-8440p:/tmp$ mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
[code]...
View 12 Replies
View Related
Jul 7, 2011
I am trying to write to a Ramdisk because I suffer from terrible IO speeds on my VPS. It uses openVZ and I run a Centos 5 distro.
So i created my ramdisk with '/bin/mount -t tmpfs -o size=1G,nr_inodes=10k,mode=0775,noatime,nodiratime tmpfs /tmp'
but whenever I try and copy files to it, it just spams me with 'no space left on device even though there is!
Here is the output of df:
/dev/simfs 157286400 6511452 150774948 5% /
none 16441412 4 16441408 1% /dev
tmpfs 5242880 1296 5241584 1% /disk/test
tmpfs 5242880 1296 5241584 1% /disk/test
[Code]....
View 1 Replies
View Related
Mar 26, 2011
I'm running CentOS 5.2,on a 64-bit x86_64 Linux machine with kernel version 2.6.18-128.el5 smp. I appear to have version 2.9.4 of xfsprogs. I have a 22TB xfs filesystem ,Yesterday, the hard disk is full, today released a 7.7T disk space.But still can not write to new file. software ambience:
[root@Production data5]# uname -a
Linux Production 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[code]....
View 5 Replies
View Related
Oct 30, 2009
I'm writing a bash script that needs to know whether or not a device node is part of a RAID array. I'm just curious if anyone knows of a good way to determine if a device node is in a RAID array. I know that you can run mdadm -Q or mdadm --examine on the device node and that will tell you. But I don't want to rely on screen scrapping and would rather have something that would return a boolean. Any ideas?
View 2 Replies
View Related
Jul 3, 2011
I'm unable to login to my Kubuntu Lucid. The login screen takes my password, blanks, then returns me to the login screen. I'm getting some graphics errors when running from recovery mode as well as the no space left on device error when attempting to start x from the terminal. Here are some outputs: When starting from recovery mode, selecting failsafeX from the Recovery Menu:
[Code]...
I've come to the conclusion that my root partition is full, but I'm not sure how to clear space, or how much to clear once I work out how to do it. I removed a few packages with apt, but it doesn't seem to have any effect. df -h shows that root is 100% full, yet it has 3GB free. I've grown comfortable with Ubuntu in the couple years I've been using it, yet this level of problem-solving is a bit nerve-wracking to me. I've been considering reinstalling (this machine is running Lucid upgraded from Karmic and Jaunty and has a few oddities), but I hate the idea of being forced to reinstall because I can't overcome this problem. If you need any other information or outputs from terminal commands, I'm happy to provide it.
View 7 Replies
View Related
Aug 3, 2010
i'm sorting 8GB text file but came up with this error for an investigation
/tmp/sortA3aLjF: No space left on device
is there anyway that sort won't use /tmp?
View 3 Replies
View Related
Nov 23, 2010
I'm using a large xfs partition on a large raid volume using 7 1TB drives. I am currently getting a "no space left on device" error message when creating files or directories. However I see the following output when checking space limitations.
df -h
[root@system]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hdd3 18G 775M 16G 5% /
/dev/hdd1 99M 15M 80M 15% /boot
[Code].....
View 4 Replies
View Related
Aug 3, 2010
We ran out of space on our server hard drive, so I installed 2 x 1GB drives, set them up as a software RAID1 array, copied the contents of /home to it, mounted it as /home for testing. Everything OK, so I unmounted it, deleted the contents of the /home folders (don't worry, we're backed up), then remounted the array. Everything was fine until we rebooted. Now I can't access the array at all; during booting the error "mount: special device /dev/md1 does not exist" comes up twice, and manually trying toe same issue. The relevant line from fstab reads:
/dev/md1 /home ext3 defaults 0 0
However, using webmin shows only md0, the RAID0 device on which the OSD was originally installed. There is no /dev/md1 device file. The mdadm.conf file reads as follows:
# mdadm.conf written out by anaconda
DEVICE partitions
MAILADDR root
ARRAY /dev/md0 level=raid0 num-devices=2 uuid=76fd4050:fb820568:c9bd3a59:ad3e70b0
So it's not listed; I'm assuming this is significant. Am I right, and whether I am or not, what can I do?
View 3 Replies
View Related
Jan 4, 2011
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
View 1 Replies
View Related
Jan 4, 2011
ibv4l2: error turning on stream: No space left on device
Webcam work in:
fps: 1/30
formate:JPEG/WMV
it works not perfect on guvcview
View 4 Replies
View Related
Aug 20, 2010
I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?
View 4 Replies
View Related
Jan 15, 2011
I have searched google for a couple of days, and I keep hearing about an INode limit on filesystems, but that doesn't seem to be the case.
Now whenever I try to download something, watch a ..... video, or listen to Pandora radio, it just stops playing after 2 seconds. Downloading says "No space left on device".I also get the error as root.I do have 5% and more free of HDD space. After reading the similar posts I checked all of this, so if I am overlooking something on the forum, I apologize for an extra post about.
View 3 Replies
View Related
Jan 19, 2011
I was running a python script tool and got this error. Exception: Command cp -Rfp /home/anil/mydroid/myfs/* /tmp/tmpX2KZDc failed (I am on dual boot ubuntu 10.10 with Win XP.) Here is a partial output from the console. Note the "No space left on device" error, when writing to /tmp.
Quote:
mke2fs 1.41.12 (17-May-2010)
Filesystem label=android_fs
OS type: Linux
[code]....
View 1 Replies
View Related
Aug 31, 2010
When I use disk utility to expand my RAID array it creates a partition on my 1.5TB drive which it would like to add to the RAID 5.
However, none of the drive existing on the RAID are partitioned so what I think has happened is the partition itself has created a difference of about 2 million bytes smaller than the others and thus unable to add the component.
How can I specify the exact bytes for my hard drive partition so that I can add this to the array?
View 2 Replies
View Related
Dec 25, 2010
I have had a software raid running on OpenSuse / SUSE 10 & 11 for some time and I have about 8TB on it. I always run close to 100% and once in a while get there but always manage to delete a bunch and clear out about 30-100GB.
View 3 Replies
View Related
May 29, 2009
I have a hd5 (?) of 10 GB for the system OS. I had used about 7 GB and believed that adding software from a NIC would not greatly exceed space on this drive but was wrong - it now has about 40KB remaining. The system has a 2GB swap drive elsewhere on the SUSE 10.1 Enterprise desktop system, 127GB HD total. The total HD has about 63 GB of "unused" space - in the hd6(?).
I could not expand the hd5 partition using the on-board partition software and did not know how to handle it so rebooted. Now the system will not start since there is not enough space. My questions: 1) How can I/can I us the on-board partition expansion SAFELY to expand the 10GB to 20GB from a scripting bootup or similar? 2) I have GNU-parted but could not install it on the Linux before rebooting - not enough space. Can it/should it be expanded on a floppy drive or similar and be used to expand the hd5 partition? I do not have another Linux machine. How can I get out of this fix?such as creating another partition, 20 GB as hd7, moving all hd5 info. into it (by script since I cannot boot up?), then deleting the orignial hd5, and renaming the new partition hd5?
View 1 Replies
View Related
Sep 27, 2010
I have a NETGEAR ReadyNAS NV+ with four 1TB drives in a RAID-5 array. This is our primary file storage. This has previously been backed up to a hardware RAID-0 array directly attached to our Windows server. The capacity of this backup array is no longer sufficient. So the plan was, take a bunch of 200GB to 320GB drives (And a 750) I had kicking around, chuck them in a couple of old SCSI drive enclosures I have collecting dust, attach them via IDA/SATA-to-USB adaptors to a USB hub, attach that to the server, create a JBOD array spanning the disks, and back up the NAS to that. Performance is not an issue as this is just to be used for backup, with the idea being as near to zero cost as possible (Spend so far = NZ$100�ish).
The first hurdle I struck was Windows not supporting Dynamic Disks on USB drives (Required to create a spanned volume). At first I resisted using another machine (i.e. a machine running Ubuntu) as I didn't want to dedicate a piece of hardware to backing up the NAS. I then decided it would be acceptable to do this via a VM, which is what I've done.So I have 10.04 running under VMWare Server 2.0.2 under Windows Server 2008 R2. The disks are all presented to the VM. I wasn't sure if I was going to end up creating the array under LVM or something else, but I noticed Disk Utility has an option to create an array, so I tried that. When I add two 250GB drives, the array size is 500GB. When I then add a 160GB drive, the array size drops to 480GB. Huh? If I keep adding disks (Regardless of order) the final array size comes out at 1.8 TB, as per the attached screenshot. Now with the following drives, I expected something more like:
160 + 250 + 250+ 750 + 250 +200 + 200 + 250 + 320 + 250 + 320 = 3.2TB
Am I missing something or making a false assumption somewhere?
View 4 Replies
View Related
Apr 28, 2010
I created a dual boot on my computer with windows vista and ubuntu using the wubi ubuntu installer for windows, and my ubuntu boot is limited to 15gb of hard drive space. My hard drive in actuality has about 150gb left on it. How do I expand the amount of storage ubuntu is allowed to use?
View 6 Replies
View Related
Jul 7, 2009
I have expanded a HP array by 500GB but am struggling to get Centos (Xenserver installation) to see it.
From the array controller the size of the disk is 1.4TB
Logical Drive: 2
Size: 1.4 TB
Fault Tolerance: RAID 5
Heads: 255
[Code].....
how I get LVM to see the whole disk that is now available (without destoying daya).
View 4 Replies
View Related
May 4, 2010
I decided a few days ago it was time to reinstall ubuntu since Lucid looked fun and interesting. Everything went really well (my table functions even worked with no configuration!) until I decided I wanted to resize my linux partition so I could install a win 7 virtual machine. I had some issues getting gparted to let me expand my partitions into free space, so I started diking around with various settings commands and I managed to screw up my partition table badly enough that I needed to boot with the live cd. After a few hours in panicked trouble shooting mode, I finally got grub reinstalled and managed to boot things regularly. But now Gparted is completely nonfunctional; it shows the entire HD as unallocated and says "can't have partition outside of disk". Apparently one of my partitions is oversized.
Here's my output of fdisk -lu and sfdisk -d:
sudo fdisk -lu
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5c5ef856 .....
View 3 Replies
View Related
Nov 20, 2010
I clean installed Ubuntu 10.10 by shrinking my Windows 7 partition slightly. Now that I want to expand my Linux partition, I shrunk my Win 7 partition from Windows OS. From Ubuntu, the partition manager shows /dev/sda1 contains the Win 7 and unallocated partition. /dev/sda2 contains the Linux and swap partitions. I can't seem to expand my Linux partition (ext4) in sda2 with the unallocated space in sda1. I also can't shift the unallocated space in sda1 to sda2. Any idea how to expand my main Linux partition with the unallocated space?
View 4 Replies
View Related
