Ubuntu :: How To Change Wireless Driver
May 18, 2011
On an older release, my wireless worked fine, and it was using the broadcom-wl driver. Now on a newer release, the driver seems to be b43, but the card is not being detected.
How can I change the driver so that it uses wl by default?
View 9 Replies
ADVERTISEMENT
Mar 30, 2010
My laptop has a built-in miniPCI wireless card that has Atheros AR-5001 chipset and use ath5k driver for wireless G. How do I switch to Broadcom wl driver for Linksys WPC-300n wireless N PCMCIA card?
View 9 Replies
View Related
Oct 1, 2010
I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
View 2 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
Jul 20, 2010
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
View 9 Replies
View Related
Oct 23, 2010
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
View 6 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Apr 1, 2011
I'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Aug 17, 2010
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies
View Related
Nov 12, 2010
According to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies
View Related
Jan 25, 2011
I got openSUSE installed, and now am trying to build my wireless driver, using the instructions here: [URL].
The wireless driver is here:
Broadcom.com - 802.11 Linux STA driver
NOTES:
- The (parenthesis: ) are my notes to show you what I was doing.
- Lines with "#" before them are what I typed into Terminal.
- Lines below (Output: ) are what was output by Terminal.
Code:
(run in su:)
lspci -n | grep 14e4
(output:)
04:00.0 0280: 14e4:4727 (rev 01)
(BUILD DRIVER:)
#su
<password>
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc_x86-32_v5.100.82.38.tar.gz
# make
(output:)
if 'make' is not a typo you can use command-not-found to lookup the package that contains it, cnf make
(NOTE: with "cnf" it is saying "Cannot Find")
(install "make" command:)
# zypper in -t pattern devel_basis
(It installs 93 packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
(Tried:)
# zypper in kernel-source
(It installed 3 more packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
The problem might be derived from the fact I had to install openSUSE in Kernel (F6) > Safe Mode. If I need to install more things, please let me know ASAP! I am wired to my ethernet until then, which means I can't move from this spot until my wireless is working!
View 9 Replies
View Related
Mar 20, 2011
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies
View Related
Jan 26, 2010
I can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies
View Related
Jun 13, 2011
When I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies
View Related
Sep 6, 2011
I am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies
View Related
Apr 6, 2010
I installed SuSE 11.2 on my laptop (its wireless and connects to the internet) and am have trouble getting my wireless HP Deskjet j4680 to be found. I tried the printer options as root, but it does not give you an opertunity to select a wireless device to connect too. Does anyone know where I can download software for this. I tried HP, no luck.
View 3 Replies
View Related
Feb 2, 2010
I had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
View 9 Replies
View Related
Feb 19, 2010
I have just installed mplayer and everything seems to work fine until i try to go fullscreen. When i do, the actuall size of the video stays the same and the rest of the screen is filled with a black border. I have seen the main problem by many people, and the solution they all found was to change the driver from x11 to xv.
In my case however, the only driver working is x11. Anything else gives the following error Quote: Error opening/initializing the selected video_out (-vo) device This is also quite wired since the output of mplayer -vo help says that all the drivers are available.
View 3 Replies
View Related
Jan 11, 2010
This is my 2nd try with 9.10 and audio has this screeching thingie that its driving me crazy. I've been using both 8.10 and 9.04 with perfect sound and everytime I come into 9.10 I have this horrorific sound that no matter what I do I can't fix it. In a thread somebody suggested to change the audio channels from 5.1 to 7.1 (which made sense since my hardware really is 7.1). but there's no 7.1 option available.
When I do lspci -v... I can see that:
Code:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
[Code]...
View 1 Replies
View Related
Jun 21, 2010
how to change my display driver (eg. ATIMACH, VESA, etc.)
View 8 Replies
View Related
Mar 23, 2010
I install on my PC Ubuntu 10.4 and i make al the updates even on my video card I update my video card to the last driver from the NVIDIA official site 195.36.15 My video card is Geforce 8600 GL The big problem is that after the update I have only 2 modes for changing the resolution 320x240 and 680x480 an I relay need biger resolution (1024x786) My xorg.config is :
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[code].......
View 1 Replies
View Related
May 26, 2010
just got a new laptop and How to get Intel Wifi Link 5100 AGN card to work. I'm Using ubuntu 10.04 LTS.
View 3 Replies
View Related
Jun 26, 2011
I have just installed Fedora 15 on my desktop machine. It has found my WiFi card and has installed a driver but it is an incorrect driver. How do I remove it and install the correct one? The driver that is installed is a RaLInk RT 2800pci but the one it needs is a RaLink RT2860. This is the driver that I used with the same WiFi card in Fedora 14 using Ndiswrapper. Do I need ndiswrapper this time too?
Clicking on "Connection Information" says that the connection is active and that the driver is rt2800pci but I cannot connect to anything
View 4 Replies
View Related
Jan 25, 2010
I just installed ubuntu netbook remix onto a hp mini 1116 nr. i can get the broadcom sta driver to activate and run when boot from the usb, but not from install on the harddrive
View 4 Replies
View Related
May 22, 2010
What driver is used for wireless on the Macbook?
View 1 Replies
View Related
Sep 24, 2010
My Netbook
Asus Eee PC 1001p
When I had windows 7 starter installed the wireless worked flawlessly so I know the hardware works but when I look at the drivers list its empty and I cannot connect to the internet after the installation of ubuntu except through a wired connection.
View 1 Replies
View Related
Feb 17, 2009
I can't get Ubuntu to recognize my wireless driver because it wants the driver to be a .inf file. However my wireless driver is a .sys file so it won't install using the windows wireless drivers function.
View 1 Replies
View Related
Jan 31, 2010
I think to change my video card.But i was asking myself, it is not good idea first to install the driver and then change the video card?What is your opinion
View 6 Replies
View Related