I installed ubuntu using a disk image, and now, when I boot, it just goes directly to ubuntu, which is corrupted. I'm running ubuntu from the disk right now, and I want to change my boot.ini file so that it just points to windows xp. How can I do this from within ubuntu? I've tried using the windows setup disk, but none of my admin passwords work.
View 9 Replies
I have ntfs partition installed bran new ubuntu system. I have some problem with unrar utf8 character zip files.Then i change my fstab file that uses files in D:ubuntudisks oot.disk and i added with out no fearless Code: ,utf8 and after all now i can't boot my linux system it does not allow me to change anything in fstab file. Although i use as a prefix sudo or as a root "sudo -i" commands I dont have any right to change it.
View 6 Replies View Relatedi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
I recently installed a 64-bit version of centOS 5 alongside a 32-bit version, which I use. Turns out the 64-bit version absolutely will not boot and I'm stuck with it as my default boot option. Since the grub being used resides on the 64-bit half, I cant edit the menu file but I know theres a way to do this without it, through grub itself. I have about 29 render nodes now with this problem, and whenever they need to be rebooted I have to hook a monitor up to each one and hold its hand through the boot process. How to change the grub menu through grub itself, basically just change the default boot option and then have it stay that way?
View 5 Replies View RelatedI'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
I currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
What config file do you change to change default run level???
View 3 Replies View RelatedI am attempting to try install XUbuntu.
I loaded the dvd (one that came with Linux Format Magazine No. 139), changed BIOS to boot from dvd, and then:
I get the welcome screen with the options to boot Ubuntu, KUbuntu, XUbuntu or Boot from First Hard Disk. As I have an older laptop I was going to try XUbuntu. However, the arrow keys did not change the boot option. In fact nothing worked, Tab did not bring up a menu and Enter did not initiate boot.
I tried reloading the dvd, switching off the laptop (no way to shutdown) and restarting but always come up with the same problem.
My DVD drive works fine and the dvd appears not to be faulty since all the info is readable when it is loaded with windows running.
My system details are:
HP compaqnx9000
Mobile Intel Pentium(R) 4-m CPU 2.20 GHz 219GHz 704MB RAM
Optiarc DVD RW AD-7580A
Radeon 1GP 340M
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
I upgraded from XP to Windows 7 (I need this for legacy business) and decided to install Ubuntu permanently rather than using from CD. During an Ubuntu session I was prompted to upgrade, which I did, but when I boot up now, there seems to be 2 versions of Ubuntu which I can choose from the boot up menu, plus the usual mem test, safe mode etc, plus the option to boot Windows 7.
Firstly, is there in fact more than one Ubuntu image (and therefore precious disk space taken up), how do I find out, and if so what action should I take?If there is only one Ubuntu and one Windows 7 image, how do I edit (and where is the file) to change the boot order and the various boot selections?
My comp came with Vista and then I installed Ubuntu, so it's dual boot. When I start up the computer, it eventually opens a screen with the options to boot Ubuntu, Vista and 3 other partitions. Ubuntu is at the top, Vista at the bottom, and it gives you five seconds to pick an OS or it automatically starts Ubuntu. This is very annoying because I almost always need Vista and I have a habit of pressing power and walking away and letting the computer load. Is there a way to have Vista be the default selection?
View 1 Replies View RelatedI have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
This is for educational purpose. In fact it is my lab tutorial for a subject.I want to capture the users password when he changes his password. Both new and old.This is the script i have come up with:
Code:
#!/bin/bash
echo "Changing password for user $USER."
[code]...
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
This on a Vostro 1220 Laptop w/ Intel 5300 wireless:
A.I have long boot up time.I think it's because of the eth0 network search which I don't use.I have an intel wireless 5300 card running.How can I speed up the boot time, i.e. disable or change the eth0 at boot, the searching?
B:When I restart or shutdown, the screen flashes repeatedly and gets some garbled colors along the top before finally rebooting looks like windows ME or something).This vostro has an intel x4500HD vid chipset in it.
C.How do I get into gnome configuration editor to turn on Metacity compositing? Alt-F2 and run gconf-editor doesn't do it. I don't do compiz, but need compositing.
D.I need to install Chromium Browser as it sync my bookmarks.I have RPMforge enabled btw also...how can I do that? I.e. rpm repo for chromium?
This will help me get off to a running start so I can get up to speed on CentOS..
Dual booting Windows 7 and Fedora 15. What I would like to know is if I can change the boot order to boot Windows 7 first and Fedora 15 as other or second.
View 5 Replies View RelatedI have successfull implemented svn. i am able to improt the project. i am able to update the file under svn and also commit the change. but the problem is when i commit the change for one file in project
The hole project version get changed. i just want ot update the changes of one file under svn not of hole file project. how to change file and update only one file. and also find the attchment of the error.
In Ubuntu 10.04 I installed VMware workstation 7.1 to run a VM - everytime I need to run it though, Workstation doesn't find a file (VMmon) and I need to run in terminal this command: sudo /etc/init.d/vmware start
How can I add this in the boot file so it starts automatically and I do not have to run it manually -
I'm running ufw-0.30pre1 on Slackware and it logs to /var/log/syslog and I wanted to know if I can make it log to it's own file, like /var/log/ufw?
View 8 Replies View RelatedI would like to change some of the file associations. for example, I like to exaile and every time I click on a mp3 I end up 'pulling' up totem the movie player. I have seen in the past but do not use this feature that much so have forgotten.
View 1 Replies View RelatedI have about a hundred and fifty html files that I would like to change image file extension on from gif to png. I want to change this line:
<img src="images/robopix/web/ROBOTNAME.gif" border="0">
to this:
<img src="images/robopix/web/ROBOTNAME.png" border="0">
Trouble is that ROBOTNAME is different in each of the hundred and fifty files. To make it harder, there are other gif filenames on these pages that I do not want to change. I only want the extensions to change if the address prefix is 'images/robopix/web/'. Is there any way to do this with a quick program/sed command rather than manually editing a hundred and fifty files?
I need to install a script into my Gimp folder which is owned by root. I tried "chown my name usr/ share/ gimp2.0/scripts" in terminal, but it tells me folder does not exist. I know I'm missing something, but I haven't done this in a while, so I'm not sure what it is.
View 2 Replies View RelatedI have a file which is in .txt .And has written inside , with a different language than the ubuntu.o Now i open it , and it shows to me like this > $)IR""RJU((AF < how can i change the format ?In windows we have the regional settings and we change them to unicode , and everything are fixed.
View 4 Replies View RelatedI faced such problem recently:I have a folder results and in this folder I have set of folders named:
1050.2000
1050.4000
1098.8000
1100.0000
in each of this folders there is file: (1_d)wu_z.I need to write a bash script which would change the name of this file (in every folder) to: wu_z.The main problem here seems to be, how to "decrease/change" the folder name by 0.2000 in the loop...
I am trying to change the owner permission of file as "read only" when the file is rcp remote copy ) from server to another for security reason. Any way to change to permission as readonly access for owner and group ( 550 )when transfer the file using the rcp command ? I tested but still retain the original permission as source file.
Version : RHEL 5.2
Command : #rcp(local file)(/destinationserver/
/folder/file)
[code]....
I originally had Ubuntu 9.10 desktop. Then I resised the partitio with the ubuntu moblin installer and installed ubuntu moblin remix(which is an interesting little distro!), but now, when I turn it on, it auto highlghts the moblin partition with (boot in 5, 4,3...). I know this is not a bug, it's just a pain.
Does anybody know how I can highlight anther entry?
How could I change the grub to boot into windows xp first instead of ubuntu on my dual boot machine?
View 4 Replies View RelatedRight now I dual boot Linux and Doze 7. As normal, grub appoints Ubuntu to be the OS highlighted to boot from. Is there a way to edit the boot list so that my Windows7 will boot automatically. Reason being my wife tends to get a little grumpy because she does not know which to choose from and does not like Ubuntu,,,yet.
View 2 Replies View RelatedI have a dual boot windows 7 and ubuntu karmic and by default whenever i turn on my system it automatically boots into ubuntu but i want windows 7 as my default boot up os, so can anybody please suggest what should i do.
View 3 Replies View Related
