I type my address 20 times a day. Imagine that I want to do something like CTRL + TAB + a to fill my address into a web form, or CTRL + TAB + p for my phone number.How might I do something like that?
View 6 RepliesI can open other PDF files (including the instruction files for form 1040), but I cannot open the form 1040 PDF with acroread. I can open the same file with evince, but I really need to do this with acroread.
Here's the output:
Code:
t@s:~$ acroread
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:57: Clearlooks configuration option "sunkenmenu" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:58: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:59: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/home/tak/.themes/tish-aquastyle/gtk-2.0/gtkrc:60: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiogconf.so
/usr/lib/gio/modules/libgiofam.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiofam.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
I think it started after the last Firefox update - I can't select text in forms on any page - not even here, while I'm writing this. When I double click, the selection appears for a fraction of a second, and vanishes instantly. Neither can I select text by dragging, the same happens. I can still select everything with ctrl+A, but I can't select single words or sentences. It's driving me nuts. I've actually switched to Chrome because of this, but I'm missing a lot of Firefox's functionality there, so I'd rather stay with Mozilla.
View 5 Replies View RelatedI read few threads from 2006, and at that time it seemed there was no good way to save a PDF which had data input in the form fields. Has this changed? Printing is not really an option, since I won't fill these forms in one sitting. When I save with Ubuntu's default PDF viewer, the form field data does not seem to be saved along with the PDF.
View 3 Replies View RelatedI'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?
View 1 Replies View RelatedI want to create a hotkey to create new folder in Ubuntu 10.04 the hotkey I want to use: ctrl shift n
Is it possible to this?
I'm guessing its going to involve remapping the keys somehow...
Last night I upgraded to 10.04. Previously I had a hotkey set up for running a terminal, but now i can't seem to get the system to recognize my preferences. I went to system->preferences->keyboard shortcuts and I set the hotkey I want to use, but I doesn't seem to save or something. What can I do to fix this?
View 9 Replies View RelatedI had opened Thunderbird and discovered I had no cursor control. Couldn't close it, couldn't exit it, couldn't switch windows. I couldn't even shut down using that button.
I figured there must be a kill command similar to Windoze cntrl + alt + del that would allow me to close that application.Is there such a keyboard hot key for doing this?
I'm running into a very strange issue that affects all web apps on my server. This happened after a reboot.
Basically, I can fill out a form, submit it, and then the next page will never load, or it will load after several minutes. To reiterate, this affects every web app on this server, and many of my users are noticing it.
I've already tried restarting Apache and doing a repair of MySQL tables
I can provide server details upon request, but it's a basic LAMP stack running Ubuntu 9.x on a Linode.
In qt designer is possible to preview forms in various widget styles. This behaves somewhat like an interpreter. Does anyone know how this is done?
View 1 Replies View Relatedlinux newbie here -- there is a feature in windows 7 that I would love to make work here. I'm sure there is some way to do it, given how customizable linux is, but I have no idea how.
In windows 7, if you hit the Windows key + the left arrow, it will automatically resize the window you are looking at to fill half the screen, on the left side. Likewise if you push the right arrow, for the right side, Windows+up arrow maximizes, and windows + down arrow minimizes. Does anyone have an idea of how I can configure ubuntu to do the same thing?
I just searching a way to modify a hotkey like in system->preference->keyboard shortcuts but in command line, because I want to make a configuration file and I need to delete a hotkey.
View 3 Replies View RelatedI am using OpenSuse 11.2 and have installed Open Office 3.1.1.5 from the STABLE repository. I have connected Open Office Base to a MySql database using JDBC. All tables are visible and accessible. However, as soon as I try to create a form, at the moment I want to connect to the data source (e.g. with the 'finish' button) Base crashes and needs to be restarted. Creation of forms is thus impossible I installed OOo vers 3.1.1.5 because it was happening with 3.1.1.4 as well.
View 3 Replies View RelatedI've just installed Opensue 11.4 (gnome-desktop) on my machine. The problem is that, if I open a database-form with libreoffice base, no navigation-bar appeares. The option "navigation" from the view-menu is not active. The database uses the built-in HSQLDB in single user mode. Navigation via libreoffice-basic is possible and I can see the first record - just it is not possible to navigate manually.
View 4 Replies View RelatedI'm new to linux I love it. I want to open oracle forms 10g in my mozilla which was default in Red Hat Enterprise Linux Server release 5 (Tikanga) ( I'm using). When I tried to open, getting error mess "Install missing plugins". I tried to install plugins manually but no use. Some one said I need to change the "pluginreg.dat" file. But I didn't find that file " /usr/lib/mozilla/plugins " to change.
View 3 Replies View RelatedWell, the title says it all. I have a form like this in my document:
<form enctype="multipart/form-data" name="profile" method="post" action="?">
<input type="hidden" name="MAX_FILE_SIZE" value="250000">
Select image:<input type="file" name="image" />
<br />
[code]...
I even printed the $_FILES array and it looks like this:
Array ( [image] => Array ( [name] => bojan.jpg [type] => image/jpeg [tmp_name] => /var/upload/phpjarPwZ [error] => 0 [size] => 10096 ) )
But the problem is that this file never gets saved to /var/upload directory (I changed php.ini file, so that uploaded files should be saved into /var/upload. I tried /var/tmp as well, but it's the same). Here are also the permissions of this dir:
drwxr-xr-x 2 apache apache 48 2010-02-17 00:30 upload
BTW, I use Mandriva 2010 64 bit distribution. I spent last two days searching for solution on internet forums, asking people and made absolutely no progress. is it possible to debug what is happening with the supposedly uploaded file? I mean any logs, where I could find trace, what's going wrong? I tried to check /var/log/httpd and files in there, but no success either...
I want t desktop cube, so I followed the ..... guide here.
When I enter simple compiz config and start to change the Ultimate profile, then I lose the ability to do key commands like alt+tab and consequently I cannot use things like the switcher, or cube. The only desktop hotkeys that I can currently do (that I know of) is ctrl+alt+left/right to move to next desktop. How do I enable hotkeys to work again?
after upgrading to 11.04, I can't use the fn-f2 combination anymore to activate the wifi card. I'm using a Dell latitude laptop. Wifi is functioning normally when it's on and I can even turn it off with the hotkeys. When I try to turn it back on, the light goes on for a second and than dims again. I than have to reboot into Windows to get it back on, which is kind of annoying.
View 2 Replies View RelatedI have tried about every combo, but cannot get any test page delivered to the printer. The device/ps setup works fine in our old Sun Unix environment.
View 6 Replies View RelatedHow to install Forms and Reports (6i) Client in Linux.
View 1 Replies View RelatedWe are revising some forms, currently published as .doc files which are printed and completed manually. The users are public so have a wide variety of software. MS Word and Excel are de-facto standards amongst the users the FOSS users can mostly work with those file formats while the Windows/Office majority cannot work with ODF formats. if the users could complete the forms interactively and email them. Some users still need to be able to print and complete manually. The FOSS users should not be disadvantaged. This could be limiting because I understand OOo support for .doc and .xls forms is incomplete including incompatibilities between VBA and OOo Basic.
View 14 Replies View RelatedI'm at a web page for an organization and I want to get a bunch of information -- say the addresses of 20 members of the organization. The web page presents a javascript form looks something like:
First name: (textbox)
Last name: (textbox)
State: (textbox)
Member status: (radiobutton)
Find: (button)
It then provides the mailing address and telephone number of the member. I don't want to enter the data by hand 20 times, but would prefer to fill out the form automatically from data in a text file or database or script or whatever. Is there a tool in linux for doing this? I looked up curl, but it seems that I can do it in curl only if they are html forms, but not js forms (or more correctly, I haven't figured out how to do it). Moreover, the page returned by curl is not the page that comes up in firefox; I don't know why.
For a website I'm making in PHP, I need a link on a particular dynamically generated page, called "Make a friend". Clicking this will take the user to a page where they have to provide their username and password, and if it's correct, the database will be updated. When the "make a friend" page is generated, the link will have a ?author=32 (say) argument, to reflect the author's id in the database. Now my problem is, that I need the author AND username and password as arguments to the "make a friend" script. How do I do this?
Instead of making the link a link, I've been toying with the idea of making it a form button (which will look better anyway), and using a <input type="hidden"> argument, for the NEXT page, which will be the page requesting the username and password, but I still can't seem to come up with a viable solution somehows.
As you've probably found out if you searched for this on Google, the new FAFSA page [URL] does not allow any Linux browser access to financial aid forms. The solution I found is to install User Agent Switcher for Firefox [URL] and restart the browser. Right click a toolbar, like the navigation toolbar near the back button, and click 'Customize'. Find the User Agent Switcher icon and drag it to the toolbar. Now you can change the browser's identity by clicking the little globe on the toolbar and select, for example, Internet Explorer 8. You should now be able to get beyond the first page of the new FAFSA website.
View 1 Replies View RelatedI love how totem handles using mousewheel up/down to change position in a media file. VLC doesn't do it the same way by default so I've been trying to find a way to replicate that feature. I found the appropriate actions and assigned mousewheel up/down for both the hotkey and global options. Unfortunately when I try to seek it only works if I mouse over the position bar or lower half of the application. If I am moused over the actual video the hotkeys don't work. In fullscreen the hotkeys don't work at all and I can only seek by holding my mouse over the position bar.
View 1 Replies View RelatedI would like to download a webpage using WGET which needs a form submission (POST method) in order to appear. I can do that with this command.
wget --post-data="computer=hosts&style=list" http://www.example.com
The problem is there is more than one form on the requested page and I dont know how to tell WGET which one should it POST the data to.
I don't often use a full word processor, but the Mrs has started to do some freelancing and needs one. I told her that that OO was every bit as good as Microsoft Word.... In OO virtually NONE of the menu options have hotkey combos.. Are they always user defined? F'rinstance, no hotkey for word count, or even option to put a button on toolbar? She is threatening to start booting to Windows!!!
View 6 Replies View RelatedSo I started playing with my hotkeys today, and much to my dismay, I seem to have irreversibly set the delete hotkey. This is extremely annoying now because instead of deleting the selected text, it executes the command that I put in. The problem is that that specific command is not listed under system>preferences>keyboard shortcuts. Somehow I set it to open the terminal, and now I can't turn it off. (One thing to note, though, is that I can set another command to do nothing with delete as the hotkey. Then terminal doesn't open, but I still can't use the key!)
View 1 Replies View RelatedOn PCLinux0S 2009. I just tried to open Oracle R12 from firefox 3.0.7 and it worked fine. I did get this message:
In order to access this application, you must install the J2SE Plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable is set before starting Netscape. To install this plugin, click here to download the oaj2se.exe executable. Once the download is complete, double-click the oaj2se.exe file to install the plugin.
You will be prompted to restart your browser when the installation is complete. But it worked fine. But on Oracle Linux 5 (ironic). I get the same message but the form does not open. I have Firefox 3.0.7 on PClinux 0S and Java TM Plug-in 1.6.0_12-b04. On Oracle Linux 5 I have Firefox 3.6.13. I cannot find Java TM Plug in.
I want to run /etc/acpi/actions/blank.sh as a regular user, but it will only run as root. I am trying to setup a keyboard shortcut to run the above script without success. I can run the file blank.sh as root, but not as regular user. Basically I went to: System > Preferences > Keyboard Shortcuts, and added a shortcut to blank the screen. I used the name: Blank Screen, the command: /etc/acpi/actions/blank.sh, and the shortcut: XF86Launch1. XF86Launch1 corresponds to the extra "Access IBM" key found on my keyboard. xev confirms that pressing the "Access IBM" key gives the keycode XF86Launch1. I can launch other programs such as firefox using this method. Here is the actual file blank.sh:
Code:
#!/bin/bash
RADEONTOOL='/usr/sbin/radeontool'
STATUS=`$RADEONTOOL light|awk '/The radeon backlight looks / {print $5}'`;
[code]....
The better method would be to get /etc/acpi/events/blank to accept a hotkey sequence, but this seems broken in Fedora 11. The file blank:
Code:
event=ibm/hotkey HKEY 00000080 00001001
action=/etc/acpi/actions/blank.sh
acpi_listen for keys Fn+F1 reports: ibm/hotkey HKEY 00000080 00001001, but the above file is not being executed.