I have installed 2D Unity 11.04 on an old desktop PC. This afternoon I tried a newly burnt Fedora 15 disk just to see if Gnome 3 would run (no luck, better graphics needed, started in Fallback Mode). Anyway I tried the live Fedora disk out for a while then ejected it and rebooted to restart Natty. I was surprised to see the Grub screen now has an earth/space theme background with Debian logos. What happened to the default purple background? Natty booted as normal and I have not installed Fedora to the hard drive.
I have been learning about Ubuntu since 8.10. I have my two computers running dual boot (W7 + 8.04 & Vista + 9.10).
Sorry if this is a noob question, but I have noticed that each time there's a new kernel (now I have 2.6.31.16-generic), the grub OS selection screen adds 2 lines: - One for the new kernel - One for the new kernel - recovery mode
So, since I installed Karmic (2.6.31.14) Ubuntu Update has added 4 rows and shows code... What is the rationale behinf this? Why would I want to boot using the previous kernel versions?
In my laptop, it's GRUB 2. How can I eliminate the unused options?
Ok for some reason my login background changed on its own without my permission or anything, I find it to be a little suspicious but im going to let it slide. Can anybody tell me how to change my Login Background in 10.04? I have no idea how it happened the first time, might have been a glitch or something.
I've been messing with settings of nautilus via Code: "Edit" > "Backgrounds and Emblems..." and selected a background image. And from that moment on, nautilus crashes (reloads) on almost every right click, menu opening, and almost any action, nautilus should do (as a file manager). Running Nautilus from Terminal and observing the output left me with a blank output ... no errors, no warnings, just reset.
I recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
I am using kubuntu 9.04 dual booting with winXP. The package kit showed that I have 179 bug fixes. So I updated them.Now the boot time grub menu shows 6(two different versions for kubuntu and kubuntu recovery mode) entries instead of usual 4(winXp + kubuntu + kubuntu recovery mode + memtest). My grub.cfg file is as follows:
Quote:
# # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub
[code]....
What is wrong. How can I change the entries. Which one to remove ?
I tried to use an image of name splash.png as background of grub boot menu. here is my output of `sudo update-grub`
Code:
Generating grub.cfg ... Found background image: splash3.png Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic
[code]....
but still grub boot menu is not showing any background.
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
We had a server failure this morning because grub was throwing error 15 (file not found). We discovered that the disk had changed names from hd0,0 to hd1,0. Making the appropriate replacements in menu.lst fixed the problem, but I'm still wondering what could have caused the spontaneous name change.
here are some other possibly related tidbits: * the server had been down because of a power loss, but it is behind a UPS so i doubt there is any electrical damage * eth0 also temporarily failed but the system failed over to eth1
My current theory is that when the bios was configuring the hardware the loss of eth0 shuffled around the addresses of the remaining hardware on the pci bus, which somehow caused the hd0/hd1 confusion. The problem is that everything i've read [URL] says that the drive assignment should be based on the way the disk is connected to the motherboard (which in this case didn't change)
I have installed CentOs 5.5 with windows XP (dual boot) and then did an update. After rebooting Now grub is showing 3 items. Here is my grub config file before update:
That's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
I've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.
I got as far as
$ xrandr --newmode "1024x576" ...
then,
$xrandr --addmode default 1024x576
but when I
$xrandr --output default --mode 1024x576
I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.
And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.
My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:
Can't Open Display
My first priority is to get the computer back to it's less-broken 800x600 state;
A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine. How can I fix this without leaving my house?
so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
insmod png if background_image /usr/share/images/desktop-base/spacefun-grub.png; then set color_normal=light-gray/black set color_highlight=white/black
I recently installed my first distro, Gnome Ubuntu Linux 10.04 via WUBI dual-booting alongside my Windows. I decided to try the other desktop environments. So I installed Kubuntu-Desktop (KDE) and Xubuntu-Desktop (XFCE) using Synaptic Package Manager.
However, Kubuntu KDE changed the boot splash screen into a from the default Ubuntu one, to the Kubuntu one. Also Xubuntu XFCE changed the log-in screen to the Xubuntu one. I DO NOT want these changes. I just wanted Normal Ubuntu-branded Ubuntu Linux with the option of logging in into the desktop environment of my choice.
When the battery status change to very low (red battery) or when i connect it to the AC, the display became black. (i have to move the mouse or press a button for to come back to the desktop)
The same happen after a suspend.
I noticed also that it takes several seconds before the battery status change when i connect it to the AC.
Ok, so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
I changed may graphic card, earlier I used NVIDIA FX5500 with nvidia driver, now I was trying to use ATI Radeon 7500, but there are problems with graphic configuration. At first attempt server started but after I changed a screen resolution the monitor went blank. I restarted a computer but after the X server started immediately the monitor wnet blank. I found that for completely for me unknown reasons Xorg was trying to use an NVIDIA glx module with radeon driver. I removed this nvidia driver, I expected ubuntu would be able automatically to set up a proper configuration, but instead of ubuntu complained about a missing driver. I also tried manually to set up some basic config using Xorg -configure but after that the Xorg server was stuck.
I've spent a good part of the day wrestling with replacing the grub background image. I did my homework and over the past few days read every thread and suggested link I could find on this forum. I had a clear idea of what needed to be done. Spacefun had quite a laugh at my expense! It was not fun at all. First, I put images in /usr/share/images/desktop-base and made changes in /etc/grub.d/05_debian_theme to point to the image I wanted to use. Yes, I updated grub but spacefun had some sort of deathgrip on the setting.
So I threw an image in /boot/grub. Well, Grub found that and spacefun was gone but there was no background image when it booted - only a black background! At this point, I just surrendered and replaced spacefun-grub.png with the image I wanted and it finally worked. There are links in /usr/share/images/desktop-base/ that point to /etc/alternatives/ which in turn point back to the original file in /usr/share/images/desktop-base/ which I think may be the root of the problem but I didn't just want to start deleting links willy-nilly. Does anyone think that might just set things straight? This whole process is several steps backwards in customizing ability from what it was with grub and GDM a few years ago. This is NOT progress!
I do need to change or edit this white Ubuntu logo on the black background that comes right after GRUB and before my xsplash is played. How do I do that? Where is that picture saved in the system?
I have edited my xsplash the way I want it by changing the pictures in /usr/share/image/xsplash but cant find a way to edit this other bootup screen.
The desktop hangs as soon as screen saver gets activated. Tried to change the setting through Prefrences, but there also the screen saver doesnot get changed, but the desktop goes very slow.
I have been using ubuntu 10.04 64 bits for about 3 month. Today I change my keyboard layout, so I want to test if everything is ok so I reboot my computer. When I try to reboot everything is as usual but the problem is that after grub. Nothing only a black screen no matter what i do. I doubt the keyboard layout change something but who knows. I run AMD phenom 940 X 4, 4 gig ram, Ati radeon HD 4870.
After much searching and trying of more complicated methods for changing the GRUB-PC background image, i found method that seems to work. The simplest one! I installed grub2-splashimages, which created a new folder in /usr/share/images, called grub. From there it appears to be as simple as adding the image of your choice, then adding "GRUB_BACKGROUND=/usr/share/images/grub/your_image" to "/etc/default/grub" file, the running "update-grub", of course.
Only problem is it doesnt work for the image i really want. So my question: What qualities should an image have if it is to be successfully used as a GRUB-PC (GRUB 2?) background? I have read that you do not need to resize the image anymore, indeed i tried resizing it to match the size a default image form the "/usr/share/images/grub" folder , and saving it with the extension .tga in Gimp and it did not work. The image i want to use is quite large, it is also black and white/grey-scale and in the .png format.
