Ubuntu :: Grub Loading "Please Wait Error 17" Adding New Hard Drive
Sep 20, 2010
I'm getting a funny error after trying to add a new internal hard drive to my computer. After adding the new drive to the "Slave" slot GRUB will not load properly and gives me the following error Grub Loading, Please Wait Error 17 I've checked in my BIOS and the "Master" drive is still the one where grub is loaded. When I unplug the new drive the problem disappears and I can load Grub normally. I've searched the threads, but couldn't find a similar problem, or a problem that could be applied to mine. I've also tried loading the live CD, but my internal CD drive is broken, and the external one I have doesn't seem to recognized during boot time.
View 9 Replies
ADVERTISEMENT
Apr 4, 2010
I am trying to set-up a home server using Ubuntu 9.10 server edition. My PC has 4 x 500Gb SATA drives which I will use for storage. I also have a 80Gb IDE drive which I want to install OS on. During installation the 80Gb IDE drive shows as sde. When doing the install I chose to install to whole disk (sde), all appears to go well. When I reboot all I get is "GRUB loading, please wait.... Error 15" Is the problem caused by my drive being sde and not sda? I have also tried partitioning sde as /. /boot and swap, still get Error 15.
View 3 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Apr 30, 2011
I applied all updates to my Kubuntu 10.04 installation, and shutdown and went to bed. Booted up this morning and found:
[code]...
This error is returned if the module load command is used before loading a Multiboot kernel. It only makes sense in this case anyway, as GRUB has no idea how to communicate the presence of location of such modules to a non-Multiboot-aware kernel. lets re-install GRUB. So I booted up my live CD, and ran:
sudo GRUB
find /boot/grub/stage1
root (hd0,0)
setup (hd0)
quit
sudo shutdown -r now
Same error. So I started looking around, and most complaints of this particular error seem to be dual boot environments, which I found rather odd, as I have never dual booted this machine.....
View 1 Replies
View Related
May 16, 2010
Grub loading wait error 21 - system this way for hours
View 4 Replies
View Related
Feb 21, 2010
i am using a RAID 1 with ubuntu 9.04. I tried to upgrade to 9.10. Total failure. Fed up and I tried to reload 9.04 onto RAID with previous "Ubuntu 9.04 Alternate Disk". Again no luck. I decide to load 9.10 on a single hard drive without using the second HD. I inactivated the second HD. Loading 9.10 is ok. When it asked me reboot I am getting the "GRUB loading, please wait.... Error 22". This is purely a Ubuntu dedicated computer, no windows in it.
View 1 Replies
View Related
Jul 16, 2009
How do I add another Windows XP SATA Hard Drive to this Grub menu, on a USB Stick?:
timeout 30
default 0
#
[code]...
View 2 Replies
View Related
Dec 7, 2010
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
View 1 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Sep 5, 2010
I bought a new hard drive. I thought it would be clever and SAFE to install Ubuntu on the Hard Drive so that would not interfere with the internal hard drive on my laptop. It worked fine until I disconnected the hard drive. I got the "Grub Error 21" when I installed. I know how to get around it, unfortunately, I have to lug around this hard drive whenever my computer sleeps or restarts. I would like to be able to restart and boot into Windows without my hard drive connected. Is this possible?
View 3 Replies
View Related
May 25, 2010
I have Ubuntu/Vista dual boot desktop with Single HDD (200GB) that i cloned to an external USB HDD (320GB) using clonezilla. My intention is to use the external HDD as a backup to up running in case my 3 year old desktop HDD fails. To make sure the clone is good to use if need, i connected external HDD to USB port and tried boot from it but got "Error 18". I tried to Google got some infoDid a fdisk -lu and got the following.
Code:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
[code]....
View 1 Replies
View Related
Nov 16, 2010
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
View 4 Replies
View Related
May 9, 2011
I recently installed openSUSE 11.4 on another hard disk of my 11.3 machine. I have another drive in my computer that is used solely for extra storage. Before installing 11.4 I could boot my computer with or without the drive installed, but now if I try to boot without it I get Error 17 from GRUB. I don't understand this as there is nothing on that drive that should be needed by boot and I can find nothing in the GRUB configuration that references the drive.I am getting ready to clear the whole system for a fresh install anyways, but it would be nice to know for future knowledge what is causing it.
View 9 Replies
View Related
May 16, 2011
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jan 11, 2011
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
View 9 Replies
View Related
Oct 23, 2010
I am having a problem booting my PC after adding a new SATA drive.
The PC has 3 drives.
SDA is a 500Gb SATA drive
SDB is a 1Tb SATA drive
SDC is a 160Gb IDE drive
The PC boots from the 160Gb IDE drive.
If I now install a 2Tb SATA drive the boot fails, it starts off OK as in the Motherboard boots from the IDE drive but sometime into the boot the / directory cannot be found.
If I boot from a live disk and check out the disks with gparted, I find that the new 2 Tb SAta drive is SDC and he 160Gb IDE drive is now SDD. I expect this is my problem but I cannot work out how to change it.
Note fstab is using UUID designations - not sure if this is relevant.
View 4 Replies
View Related
Mar 29, 2011
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
View 11 Replies
View Related
Feb 21, 2010
I ran out of space on my /home directory and added a drive. I've got it in my fstab file but how do I get Ubuntu to add the space to my /home? The line I put in fstab is:
/dev/sda5 /media/mynewdrive ext3 defaults 0 2
View 2 Replies
View Related
Apr 8, 2010
I need some help on this one. I added an second internal hard drive to my file server, a 500GB WD. I want to use this drive as the primary storage drive for my file server, and I want to format it with XFS. I've found some guides showing me how to add hard drives, but they didn't really fit what I want to do. When I run fdisk -l this is what I get
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0001af4f
[code]....
Disk /dev/sdb doesn't contain a valid partition table
View 7 Replies
View Related
Jun 18, 2010
Adding a Second Hard Drive?
View 2 Replies
View Related
Oct 12, 2010
What can you do with adding a second hard drive..?
View 7 Replies
View Related
Jun 24, 2010
I've just bought a reconditioned PC but the HDD is of very small capacity. I have the hard drive from my old
PC before it died, and it has all my work on it. Can I simply cable up my old HDD in my new-ish PC so that I can access all the material on my old hard drive; the old drive is much larger and has spare capacity on it which I would like to use. Both HDDs are IDE, and the OS is Ubuntu 10.4.
View 6 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Sep 9, 2010
I just switched to ubuntu and i love it!! The installation went flawless but i had a second hard drive while i had windows vista to store all of my media, i.e. mp3 and pictures. Am i able to access the stored information on the second hard drive in ubuntu? Will i need to delete the partition in order to use the second hard drive for future use? The second hard drive shows up in the disk utility application, but not in the computer/file browser section. The file system for the second hard drive is hpfs/ntfs.
View 3 Replies
View Related
Apr 29, 2011
I have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
View 2 Replies
View Related
Sep 28, 2009
I just added a new hard drive an I am in gparted and when i try to create a primary partition I can only choose hfs, what am I doing wrong? I want to create ext3 or ext4
View 1 Replies
View Related
Jul 3, 2011
I'm using ubuntu 10.10 and I would like to add a drive to grub. I have windows xp installed on the other drive, but in order to get to it right now I need to change drive priority in the bios. So how do I go about adding this new windows drive to grub?
View 3 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
