I am having a problem booting my PC after adding a new SATA drive.
The PC has 3 drives.
SDA is a 500Gb SATA drive
SDB is a 1Tb SATA drive
SDC is a 160Gb IDE drive
The PC boots from the 160Gb IDE drive.
If I now install a 2Tb SATA drive the boot fails, it starts off OK as in the Motherboard boots from the IDE drive but sometime into the boot the / directory cannot be found.
If I boot from a live disk and check out the disks with gparted, I find that the new 2 Tb SAta drive is SDC and he 160Gb IDE drive is now SDD. I expect this is my problem but I cannot work out how to change it.
Note fstab is using UUID designations - not sure if this is relevant.
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
I ran out of space on my /home directory and added a drive. I've got it in my fstab file but how do I get Ubuntu to add the space to my /home? The line I put in fstab is:
I need some help on this one. I added an second internal hard drive to my file server, a 500GB WD. I want to use this drive as the primary storage drive for my file server, and I want to format it with XFS. I've found some guides showing me how to add hard drives, but they didn't really fit what I want to do. When I run fdisk -l this is what I get
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0001af4f
[code]....
Disk /dev/sdb doesn't contain a valid partition table
I've just bought a reconditioned PC but the HDD is of very small capacity. I have the hard drive from my old PC before it died, and it has all my work on it. Can I simply cable up my old HDD in my new-ish PC so that I can access all the material on my old hard drive; the old drive is much larger and has spare capacity on it which I would like to use. Both HDDs are IDE, and the OS is Ubuntu 10.4.
I just switched to ubuntu and i love it!! The installation went flawless but i had a second hard drive while i had windows vista to store all of my media, i.e. mp3 and pictures. Am i able to access the stored information on the second hard drive in ubuntu? Will i need to delete the partition in order to use the second hard drive for future use? The second hard drive shows up in the disk utility application, but not in the computer/file browser section. The file system for the second hard drive is hpfs/ntfs.
I have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
I just added a new hard drive an I am in gparted and when i try to create a primary partition I can only choose hfs, what am I doing wrong? I want to create ext3 or ext4
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND: dmesg | grep drive hda: MAXTOR STM3160215A, ATA DISK drive hdb: WDC WD800BB-55JKC0, ATA DISK drive
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup: kernel image: (hd0,4)/boot/i386/vmlinuz-xen initial ram disk : (hd0,4)/boot/initrd-xen root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 vga-mod:1024x768, 24 bits (mode 0x318) optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
I set my mom up with Linux mint 9, and I am wondering how to add a 250G hard drive to it.(On slackware it was easy on ubuntu and Linux mint its is very difficult, because of the addresses.) Is there some easy way to add it to format/check for bad blocks. One more thing I don't want to deal with addresses so is there some easy way to do that?
I'm getting a funny error after trying to add a new internal hard drive to my computer. After adding the new drive to the "Slave" slot GRUB will not load properly and gives me the following error Grub Loading, Please Wait Error 17 I've checked in my BIOS and the "Master" drive is still the one where grub is loaded. When I unplug the new drive the problem disappears and I can load Grub normally. I've searched the threads, but couldn't find a similar problem, or a problem that could be applied to mine. I've also tried loading the live CD, but my internal CD drive is broken, and the external one I have doesn't seem to recognized during boot time.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
I need to expand one logical volume which is now in 99% utilization. The volume group only have 5GB and they need 25GB more so that I can add 30GB. The disks will be coming from SAN Storage. If the SAN Admin can successfully add the disks to the server and I can see it, should I still partition it and change the type to Linux LVM?
I have tried just doing a pvcreate without partitioning and do a vgextend and it works without actually partitioning the disks. But when I do "fdisk -l", it actually shows that the disk don't have partition.
Whether I need to partition the drive to 8e (Linux LVM) before doing? Which one is better? Below are my steps and please let me know if this the correct one.
Here's my steps:
1.) dmesg | grep sd (to check the newly added disks) 2.) fdisk /dev/sdx (create primary partition and assign Linux LVM to type) 3.) pvcreate /dev/sdx 4.) vgextend VolumeName /dev/sdx 5.) lvextend -L+30G Volume01 /dev/Volume01/lv01 6.) umount /dev/Volume01/lv01 7.) resize2fs /dev/Volume01/lv01 8.) mount /dev/Volume01/lv01 /lv01 9.) df -h (check if resized successfully)
I'm fairly new to linux in general, I am making strides, and I decided to buy a 500gb hard drive to run as a slave, for the increasing amount of data I store, and I cant use it. I tried to follow a PsychoCats tutorial, and while it was informative, I either did something wrong, or I didn't understand. With Gparted I managed to format it with Ext4. IT shows up in my diskspace widgit as /dev/sdb1. But states it isn't accessible, and has a total drive space of 0mb. I don't need anything fancy. I just want it to read and write properly.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have the newest Ubuntu installed on my machine. It currently has a 160GB sata drive. I just bought two shiny new 2TB drives that I want to RAID as 4TB. How do I go about adding these two hard drives even though install is complete? I want the 4TB assigned to my /home directory.
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
