Ubuntu :: Got 2GB RAM Computer Only Recognized 1.5GB?
Feb 2, 2010I got an nVidia 8400M G, on a lappy.(Fujitzu Esprimo v6515) Is this normal? How do I get it to recognize the missing 500mb?
View 9 Replies
ADVERTISEMENT
Ubuntu Networking :: Ethernet Lan Port On The Computer Seems To Not Be Activiating As No Wired Connection Is Recognized
Oct 6, 2010while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies View RelatedUbuntu :: Sd Card Not Recognized - How To Make It Recognized
Jun 2, 2010I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies View RelatedDebian Hardware :: HDD Not Recognized In BIOS But Recognized Upon Boot
Sep 18, 2014I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
Software :: Makefile - File Not Recognized - File Format Not Recognized Collect2 - Ld Returned 1 Exit
Mar 27, 2010I was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
Software :: /usr/lib/libgd.so - File Not Recognized - File Format Not Recognized
Jul 22, 2009I'm trying to cross-compile glibc 2.2.3 for PowerPC 405 using ELDK 3.0 on a x86_64 machine.
I have unzipped glibc-2.2.3 in a temp directory and configured using:
The configuration seems to run fine but when I do make I get the following error:
This is the error in the config.log file:
I have installed the libgd package using apt-get install libgd2-xpm-dev and I also tried recompiling using libgd2-noxpm-dev package but I still get the same error.
Software :: Access Computer A's Shares As Well As The Third Computer, The Aforementioned Computers Cannot Access Computer B
May 28, 2011I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Ubuntu :: Grub4Dos Error / Tried To Switch Back To Computer Control And Computer Went Black?
Jan 9, 2010Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
Ubuntu :: Install Windows Xp On Computer In Virtual Machine - Watch Netflix On Computer
Jun 30, 2010so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
Ubuntu Networking :: Assigned Computer A's Static Ip To Computer C Without Changing Dhcp Setting?
Aug 18, 2010I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedUbuntu Multimedia :: Find A Way To Watch Videos From Main Desktop Computer On Another Computer?
Jul 9, 2011I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
Ubuntu Multimedia :: Stream Music From Computer (9.10) To Windows Computer Using Vlc
Jan 30, 20101. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
Ubuntu :: Way To Remotely Disconnect OTHER Computer's Pidgin / While Using Current Computer?
Aug 29, 2010i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
Ubuntu Networking :: One Computer Sees Network, The Other Computer Doesnt?
Nov 11, 2010My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedUbuntu Networking :: Computer Finding The Name Of Another Computer Under DHCP?
Sep 10, 2010I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
Ubuntu Networking :: Move HD To New PC - Can't Access Computer From Other Computer
Sep 21, 2010I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedUbuntu :: Make Traffic Pass Through Computer To Another Computer?
Mar 17, 2011I am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
General :: Lost Computer Login Password For Computer Model D250-1958
Jan 5, 2010for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies View RelatedGeneral :: Scp Command - Copy File Into Local Computer By Still Sitting In 1st Computer
Jun 17, 2011I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
Ubuntu :: X2x - Allows To Use The Keyboard And Mouse From One Computer On Another Computer
Feb 9, 2011I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.
General :: Cousin Unplugged The Computer - Freezes And The Computer Reboots Over And Over
Apr 17, 2009I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
Fedora :: Copy A File From 2nd Computer To Local Computer?
Jun 20, 2011I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
General :: Moving Data From Computer To Windows Computer
Jun 28, 2011I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies View RelatedNetworking :: How To Find Ip Address Of Other Computer In LAN Network From Own Computer?
Jun 7, 2010i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies View RelatedGeneral :: Redirect Serial Port From ONE Computer To ANOTHER Computer?
Feb 25, 2011I need redirect serial port from ONE computer to ANOTHER computer, and at the another send this port to VirtualBox with WindowsXP.VB needed because i need to use software for windoze I do this:NE computer:socat tcp-l:54321,reuseaddr,fork file:/dev/ttyS0,nonblock,waitlock=/var/run/tty0.lock
ANOTHER computer:
socat pty,link=/tmp/ttyS0,waitslave tcp:ONE:54321
Now (at ANOTHER) i've set serial port in VirtualBox as
[code]...
Networking :: How To View Computer On Windows Computer?
Jan 1, 2010I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies View RelatedUbuntu :: Alt+tab Not Recognized ?
Aug 16, 2010I'm using Ubuntu with GNOME and alt+tab for switching windows does not work for me. I checked the system prefs & the keyboard shortcut was correct set.
I even tried changing the key to something else (that doesn't contain alt). It didn't work either. It appears as if the manager didn't recognize the shortcut & the key strokes were passed through to the current application. Rebooting didn't help either. Note that I can do alt+f5, alt+space. alt+f2 didn't work though.
Ubuntu :: USB Not Recognized On 10.10
Mar 5, 2011I have been trying to make my USB flash drive mount for a while now going through most of the forums i could find. I've got it working to the point that if i restart with the flash drive in the USB port it will recognize it upon startup, but if i remove it and try to put it back in....nothing. I have the cheap Acer Aspire One, 1 GB ram etc. even if i go into disk utility and try to mount it it wont work, and i get this error message,
Error mounting: mount exited with exit code 1: helper failed with:
mount: according to mtab, /dev/sda1 is already mounted on /
mount failed
which from the little research i have done my computer wants to mount my sdb1 onto sda1 which is my hard drive. i've tried the usb stick in all the ports, nothing changes. it works fine in my windows xp computer. my camera is accepted as well as my mp3 player (although this has just recently started to work...
Ubuntu :: Usb Is Not Recognized
Dec 22, 2010I tried to install Ubuntu UE, while installing due to less space on my pc hard drive i used external USB (400GB) hard disk for file system, i have selected ext4 file system and 100GB space in disk partition menu, after selecting and start to partition option, i remembered that USB hard disk is already contains 300GB of data which is very important. So I canceled the Ubuntu initialization activity with in 10 second.
The problem is now , iam not able to see my data and the USB hard disk is also not getting recognized in windows PC .Is there is any way to retrieve my data.
Software :: Postfix - Send Mail From One Local Computer To Another Local Computer?
Jan 8, 2010What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com
hi there
[CONTROL-D]
[code]...