Ubuntu :: USB Not Recognized On 10.10

Mar 5, 2011

I have been trying to make my USB flash drive mount for a while now going through most of the forums i could find. I've got it working to the point that if i restart with the flash drive in the USB port it will recognize it upon startup, but if i remove it and try to put it back in....nothing. I have the cheap Acer Aspire One, 1 GB ram etc. even if i go into disk utility and try to mount it it wont work, and i get this error message,

Error mounting: mount exited with exit code 1: helper failed with:
mount: according to mtab, /dev/sda1 is already mounted on /
mount failed

which from the little research i have done my computer wants to mount my sdb1 onto sda1 which is my hard drive. i've tried the usb stick in all the ports, nothing changes. it works fine in my windows xp computer. my camera is accepted as well as my mp3 player (although this has just recently started to work...

View 4 Replies


ADVERTISEMENT

Ubuntu :: Sd Card Not Recognized - How To Make It Recognized

Jun 2, 2010

I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...

View 7 Replies View Related

Debian Hardware :: HDD Not Recognized In BIOS But Recognized Upon Boot

Sep 18, 2014

I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.

Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.

Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?

View 0 Replies View Related

Software :: Makefile - File Not Recognized - File Format Not Recognized Collect2 - Ld Returned 1 Exit

Mar 27, 2010

I was installing DYMOUM from [url]. "make" command is issuing this error:

Code:

Prior to this, ns-2.34 was working fine. Patches are applied very well.

I am in under fedora 9 and:

Code:

View 9 Replies View Related

Software :: /usr/lib/libgd.so - File Not Recognized - File Format Not Recognized

Jul 22, 2009

I'm trying to cross-compile glibc 2.2.3 for PowerPC 405 using ELDK 3.0 on a x86_64 machine.

I have unzipped glibc-2.2.3 in a temp directory and configured using:

The configuration seems to run fine but when I do make I get the following error:

This is the error in the config.log file:

I have installed the libgd package using apt-get install libgd2-xpm-dev and I also tried recompiling using libgd2-noxpm-dev package but I still get the same error.

View 2 Replies View Related

Ubuntu :: Alt+tab Not Recognized ?

Aug 16, 2010

I'm using Ubuntu with GNOME and alt+tab for switching windows does not work for me. I checked the system prefs & the keyboard shortcut was correct set.

I even tried changing the key to something else (that doesn't contain alt). It didn't work either. It appears as if the manager didn't recognize the shortcut & the key strokes were passed through to the current application. Rebooting didn't help either. Note that I can do alt+f5, alt+space. alt+f2 didn't work though.

View 5 Replies View Related

Ubuntu :: Usb Is Not Recognized

Dec 22, 2010

I tried to install Ubuntu UE, while installing due to less space on my pc hard drive i used external USB (400GB) hard disk for file system, i have selected ext4 file system and 100GB space in disk partition menu, after selecting and start to partition option, i remembered that USB hard disk is already contains 300GB of data which is very important. So I canceled the Ubuntu initialization activity with in 10 second.

The problem is now , iam not able to see my data and the USB hard disk is also not getting recognized in windows PC .Is there is any way to retrieve my data.

View 2 Replies View Related

Ubuntu :: Got 2GB RAM Computer Only Recognized 1.5GB?

Feb 2, 2010

I got an nVidia 8400M G, on a lappy.(Fujitzu Esprimo v6515) Is this normal? How do I get it to recognize the missing 500mb?

View 9 Replies View Related

Ubuntu Installation :: ISO CD Is Not Recognized

May 1, 2010

I downloaded the Ubuntu ISO from Ubuntu website.I wrote it in a CD....I use Linux.I followed the procedures properly.I used the Write to Linux Option after right clicking the file.Now When I try and boot it from windows the CD doesnt load properly...But in linux it does and it shows the files.

View 3 Replies View Related

Ubuntu :: 10.4 Lucid Not Recognized ?

May 14, 2010

About two weeks ago I upgraded from Karmic to Lucid. The upgrade went fine, everything works wonderfull, except maybe for Wine but am still figuring that out.

What I find a bit strange is that on the boot-up screen (where I get the choice between the different OS's on my two hard-drives) I still see Karmic listed on the partition where I upgraded (see attachment: on /dev/sda1).

When I boot-up, I first get this message: Mounting: mounting none on /dev failed: no such device

This stays about 20 seconds on screen after which Lucid starts up and gives me the log-in screen.

View 3 Replies View Related

Ubuntu :: USB Devices Not Recognized In 10.04?

May 25, 2010

I'm running Lubuntu 10.04 on a Thinkpad T41. I had been running for a week before realizing that my USB devices (card reader and thumb drive) were not being recognized. I thought that the issue might be related to my aging Thinkpad but I installed the hard driveat is running Slackware and I had no issues with USB devices. I reinserted the hard drive with Lubuntu and was unable to recognize any USB devices.Has anyone else noticed this issue? If so, is there a fix for this issue?

View 9 Replies View Related

Ubuntu :: New HDD Not Recognized During Install?

Jul 10, 2010

I just built a new PC, and was hoping to install Ubuntu on it. However, my hard drive is not being recognized by gParted or the installer. I think this may be due to the fact that my drive is SATA 3 and there is no support for it. the specs I think are important are below, tell me if you need to know anything else

CPU: Intel i7
Harddrive: Western Digital 1 TB SATA 3 Black Edn.
Motherboard: ASUS Rampage III Extreme

View 4 Replies View Related

Ubuntu :: RCA H125A Is Not Recognized

Jul 24, 2010

I have a great music collection that I keep in Banshee. When I plug in my ipod it works perfect and syncronizes well. But when I try to give my dad my music on his RCA H125A, it opens the mp3 player like a mass storage device and it never appears on Banshee. Is there a way to get it to work?

View 1 Replies View Related

Ubuntu Networking :: The Usb Lan Is Not Being Recognized?

Oct 4, 2010

Bus 002 Device 010: ID 2019:5303 PLANEX GW-US54GXS 802.11bgIve been hunting the net and this forum , but I am lost ,,, could someone point me in the right direction?The usb lan is not being recognised , possibly due to the driver

ps outputs physical id: 1
bus info: scsi@8
logical name: scsi8

[code]....

View 1 Replies View Related

Ubuntu :: Blank Dvd Is Not Recognized?

Dec 11, 2010

on my dad.s dimension 2400, blank dvd's that we bought to write videos to are not recognized n nautlius, brasero, nero, or any of that.

what exactly do i need to do??

View 9 Replies View Related

Ubuntu :: How To Tag MP3 To Be Recognized In Windows

Jan 13, 2011

I have tagged my mp3 collection using Rhytmbox. The problem is that my mp3 player is a Windows based and does not recognize these ID tags. Also, when I examine files in Windows, I see only empty spaces. When I did tagging in Windows, mp3 player recognized them without any problems. Any recommendation for some SW to ID tag my mp3s that would also be recognized by Windows/my mp3 player?

View 3 Replies View Related

Ubuntu :: Cannot Get Cam To Be Recognized By Cheese

Feb 28, 2011

webcam is listed if I do "lsusb" in a terminal, but no software recognises it at all.

I cannot get cam to be recognised by Cheese, aMSN, Empathy or emesen.

Trying to work out if its a prob with my cam or whether there are still probs with using cams on Linux.

View 4 Replies View Related

Ubuntu :: HDD Not Recognized After RAM Upgrade

Jul 26, 2011

I was trying to help my dad upgrade the RAM in his Toshiba laptop running Ubuntu 10.10. I checked on several websites to verify that I had got the proper RAM to upgrade from his 2x512MB to 2x1GB (his machine is old, max RAM is 2GB).I swapped the RAM out and rebooted, as I've done many times on other machines, and nothing happened-- the HD light was lit, but nothing else, no bios messages, nothing, just a black screen.

I thought maybe I had bad RAM so I swapped in another set that I had, and this time it tried to boot, but when Ubuntu loaded it died with messages saying that it could not find/mount the hard drive.I was able to put the original RAM back in and it worked fine. I'm pretty puzzled by this-- how could the RAM affect the HD? Is this a sign of needing to upgrade the BIOS or something?

View 3 Replies View Related

Ubuntu :: 10.04.03 - CD / DVD Drive Not Getting Recognized

Aug 10, 2011

I am running Ubuntu 10.04.03 on an ASUS P5VD2-X. There are numerous HDD attached, but one is uniquely Win XP, the other uniquely Ubuntu. Boot choice is via a GRUB loader. Ubuntu is the first choice normally. The problem is that more often than not, the system does not seem to be able to recognise the CD or DVD reader/writer. On some random occasions, they are recognised, but mostly not. But - and here is the upsetting bit - this problem never occurs when I boot up on Win XP. The CD/DVD devices are instantly and reliably recognised each and every time. So I guess that rules out a hardware or BIOS problem. This is a particularly annoying problem as use of the optical drives is required frequently, and it galls me having to revert to Windows just to use them.

View 1 Replies View Related

Ubuntu :: Sata Dock Not Recognized?

Jan 7, 2010

OS: Ubuntu Minimal ( OpenSSH, Samba )For some reason my Blacx Duet sata dock is not getting recognized and I am not sure what I am missing but it seems to work when I connect it to a full ubuntu install that is in a VM.Anyone know if something needs to be installed for it to work properly... regular flash drives work perfectly fine.

View 1 Replies View Related

Ubuntu :: AVI File Not Recognized On Any Player?

Feb 5, 2010

I tried playing a .avi file using VLC player and Movie Player, but neither will read the file. There is no image or sound. I will post the error message shortly.

View 8 Replies View Related

Ubuntu :: Second Hard Drive Not Recognized Now

Feb 19, 2010

I have a 2nd hard drive (500 GB) that I keep my media on. When I tried to access it, it wasn't showing up in places or even places > computer. I used system > administration > disk utility. On the left hand side it shows the drive listed with the type and model number. Right under that it shows 500 GB Hard Drive unrecognized unknown or unused. If possible I would like to recover the media on this drive. I had setup this drive as ext3 and had it mount /media/sdb1. I can go to /media/sdb1 in the file browser but nothing is there.

View 9 Replies View Related

Ubuntu :: Can't Get The Scanner Recognized By Xsane ?

Mar 4, 2010

I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.

I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.

Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.

The printing side of things works fine but I can't get the scanner recognized by Xsane.......

View 5 Replies View Related

Ubuntu :: 640 GB External HD Not Recognized Correctly?

Mar 12, 2010

I bough a 640 GB external USB disk.I found something wasn't working well when I couldn't restore a backup from the disk (with sbackup).So I tried to convert the filesystem from fat32 to something newer.I installed gparted, and it shows no partitions on the 640 drive (however, I can access the filesystem!!!). Also, for some reason it shows as a 298.08 GiB drive.So I thought I should format it to solve this. When I tried to do this, gparted simply closed, with no error messages.

View 9 Replies View Related

Ubuntu :: Login Password Not Recognized?

Apr 1, 2010

I installed Ubuntu 9.1 (new install on a Dell Precision 340) a few weeks ago and I'm quite happy with it.However, today I was unable to login (after start up), presumably because the password could not be recognized. To work around this I logged in under another username (who doesn't have admin privileges),opened user settings (System>Administration>Users and Groups), changed my password, rebooted, logged in with my new password, and proceeded to change my password back to what it was. This was the second time I had to do this. I'm sure that this was not due to an error in typing in the password, but I have no clue what could have caused this.

View 4 Replies View Related

Ubuntu :: External Devices Not Recognized In 9.10?

Apr 5, 2010

Jaunty is fully updated but SUDDENLY is not recognizing external devices (card reader, camera, DVD inserted in drawer, etc.) In other words, I cannot see my media and, therefore, cannot open it.

Anybody else having problems here? What's up? Did something go wrong in the updates?

(AMD64 running stable Jaunty 9.10 fully updated)

View 3 Replies View Related

Ubuntu :: 4GB RAM Not Recognized On 64bit Cor2Quad / What To Do?

Apr 24, 2010

I have this Core 2 Quad Q6600, recently upgraded myself to 4 GB DDR3. The OS installed is also 64 bit version, I somehow dont manage to see all of 4 GB as installed RAM on the system.

Anything that needs to be done ?
The same is the problem with the dual booting windows, but that is 32 bit and I expect that to happen anyway. Is there this same problem with Ubuntu too ?

View 2 Replies View Related

Ubuntu :: DVD Won't Autoplay Even Be Recognized - In Lucid?

Apr 28, 2010

I just installed 10.04 and am pleased w/ things, for the most part. However, I cannot get a DVD disc to play (a movie, for instance) or be recognized unless I shut down the system and restart (provided I have already launched a Web video, or something). The DVD-ROM is dead to the world as far as disc recognition goes.

Things were just great in Karmic so this is completely confusing to me.

View 2 Replies View Related

Ubuntu :: Print Server Via Usb And They Are Recognized As /dev/usb/lp*?

May 1, 2010

2 dot matrix printers2 zebra barcode printers1 epson laser printerto my print server via usb and they are recognized as /dev/usb/lp*but everytime the identifications are changing.the first connected printer goes as lp0 and the one after lp1... i want to fix every printer to a unique name or lp id. like

2 dot matrix printers - lp0 and lp1
2 zebra barcode printers - lp2 and lp3
1 epson laser printer - lp4

[code]....

View 1 Replies View Related

Ubuntu Installation :: Printer Is Not Being Recognized

May 14, 2010

I have been trying to set up my Brother 5370dw in the network.It recognized easily with the usb, but I sure would like to set it up with my network.I have tried to have it find the networked printer to no avail, and I do not know how one can "force" it to be recognized.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved