I installed Gmote 2.0 yesterday and it worked like a charm the first time and I could use most of it's features. But then after restarting the computer, I can not get my phone to find the server running on my computer anymore. I have tried whatever that came to my mind but it has not been successful.The first time, it just found it without any delays, but seems to be unable to do that now.
View 1 RepliesIm trying to install gmote but nothing is happening i run the .sh file and i see the terminal pop up really quick and go away i have also tried to copy and paste but as soon as i paste the terminal closes any pointers?
View 3 Replies View RelatedFollowing error message? basically trying to get Gmote to work under Lbuntu OS.
Web-browsing and Pointer working okay however whilst browsing music and video Gmote is crashing:-
Am using pre-installed VLC and Java/JRE.
I am using gmote on my android phone to control my desktop. this works fine when guarddog is disabled and even though i have legato networking protocol enabled (this is the port range gmote is supposed to use 8889 and 9901) i am still having no luck locating my desktop with the firewall enabled.
View 2 Replies View RelatedI have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
Having a problem on all of my Ubuntu machines when i goto this address: [URL]... i get a "server not found Firefox cant find the server [URL]... this is only happening on Linux i have a dual boot on an epc with vista and it loads the site. normally i wouldn't even care but my girlfriend will be taking on line classes here and i need to get this to load.
View 5 Replies View RelatedRunning Ubuntu 10.10 x64, fully updated kernel and stuff, in VMWare Workstation 7.
Before I tried installing the Nvidia driver, I set up all my stuff, settings, etc. Restarted several times, everything went okay.
I then decided to install the Nvidia drivers for my GTS 250. I first tried the manual install (sudo sh NVIDIA-INSTALL-NAME.run) and it failed saying something about the nvidia.ko or nvidia.so. I tried using this page http://ubuntuforums.org/showthread.php?p=9203671 to fix it, but it still failed, so then I used the automatic method (sudo apt-get install nvidia-current) and it installed fine, then I ran nvidia-xconfig and restarted.
The VM started up, but no GUI came up, instead, a black screen with a terminal (I think it's called a Virtual Terminal) came up and asked me to log in. I tried the command "startx" from there, and it told me no screens were found.
What can I try?
I'm new to Linux and I recently decided to try out Ubuntu. I used the Wubi installer so it's on Windows (just to see if I liked Ubuntu) and it works fine, but with one exception: the internet (or maybe just Firefox) isn't working. The internet connection worked just fine on XP. On Ubuntu, it says that it was able to connect to the wireless network, but when I try to go to any page on Firefox it just keeps trying to load perpetually and never connects to the site, eventually just showing the "Server not found" page.
View 9 Replies View RelatedI am trying to get into a directory on my server, that is owned by root.
[Code]....
Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?
View 9 Replies View RelatedMy initial installation is for 10.4 (desktop). I've configured the package manager with my proxy information under the network tab. Downloads are attempted but none are successful. example error:Failed to fetch [URL]
I can download the example above via the firefox browser on the same machine configured with the same proxy.
I've tried changing servers, other hacks, but no change in results. I suspect its a proxy issue, but I don't see how. I did provide the credentials in the http authentication window that my reverse proxy requires.when I try to change servers, I get this message: No suitable download server was found
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.
Is it possible to do a 301 redirect for all file not found on a whole server?
or at least a specific 404 document for the whole server instead of setting it up for each domain/user.
I am using CENTOS 5.6 x86_64
When I'm recompiling apache and php, it doesn't go through and I get this error:
Code:
checking for atomic.h... no
/usr/include/mysql/my_global.h:364:24: error: asm/atomic.h: No such file or directory
[code]....
I have made linux raid array, named it md1 and it can be found under /dev/md1. I have created single partition (whole disk) of type LVM (8e) and it can be found under /dev/md1/md1p1.
When I run: pvcreate /dev/md1/md1p1
I get this message: Device /dev/md1/md1p1 not found (or ignored by filtering).
But if I run pvcreate /dev/md1
Everything went OK. I can create volume group and logical groups after that.
I haven't found anything specifically on net, except that partition for LVM to work should be of type 8e. Does this doesn't have to be true when we use whole disk as a VG? Should I expect any problems since this is going to be iSCSI target disk?
i am geting following error when i use make
make: -F.: Command not found
HBHB****
**** The configure script must be executed before running 'make'.
**** Please run "./configure".
****
make: *** [makeopts] Error 1
I have installed apache 2.2 from source and it works prefectly.
I compiled and installed php 5.2 but php pages resolve to page not found.
I checked the logs but did not find anything also apache has loaded the php5 module successfully.
Below is the apache configuration
[URL]
My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.
View 9 Replies View RelatedOn a school network the Windows and Mac computers connect to the internet with no problem. The Ubuntu(10.04) computers are connected and work on the internal network but have major issues going out of the building. I can get to one or two webpages to open and the connection dies...Server not found. Ping within the network and there are no lost packages, if I ping outside many lost packages.
We are using SonicWall and think it could be blocking...but why only Ubuntu? This is the same behavior for Firefox and Seamonkey. It's also the same for the thin/fat clients and standalone units. I did try a fresh install with no effect. The internet actually works on the one machine with ubuntu 9.10. I brought a machine home and it connected to the internet with no problem.
Two things I can think of that would of caused this are:
1- we keep getting windows about missing applets, someone may have clicked delete
2- I connected a server to run fat clients w/ LTSP and discovered my server and the schools were handing out the same ip's.
I have a laptop with Redhat 5 installed and a Windows 7 Virtual Machine. The laptop is connected to the internet but I cant access any web pages in firefox - it just comes up with Server Not Found (tried all different sites). I know the internet connection is good as if i go into my windows VM firefox works normal. Ive checked the network settings and tried setting to 'no proxy' and automatically detect but nothing seems to work. Ive uninstalled and reinstalled firefox and still get the same.
Ive tried both wired and wireless but makes no difference. Seems really weird that it works in the Windows VM but not in Redhat which its booting into.
I started using fedora 12 while on a trip and it was working fine. When I came home firefox wouldn't connect (server not found). Package loader, and skype, and email work fine.
ftp: won't work
I downloaded 2 other browsers seamonkey and something else but neither worked. It's not hardware because if i boot window there's no problem. Wireless or wired has same problem. I can ping inside and outside my lan. Nslookup resolves the address and if I type the ip address in the browser it will show the page, but clicking any links will error (server not found).
I have had my little netbook for over a year now but I must admit, that Linpus and I do not like each other (thinking of having someone put Ubuntu on it - heard thats better).Now I have moved and am trying to get my netbook to access the new internet connection. So far so good. The wireless connection is standing (100% connected), but now I get the message Server not found. I am using Firefox by the way. And yes, I have googled this problem, all plus are plugged, I have been online with this computer before etc.And right now I am online with my second computer, which has no problems accessing the internet.What now? I must also say that for a NETbook I am having a hell lot of trouble going online... Where other computers just connect, this little devil has problems very often.
View 2 Replies View RelatedGcc seems to be installed by not configured maybe?Below are some command line resultsIs gcc installed, and if so, how do I configure it so it run properly.
rpm -qa | grep gcc
libgcc-4.1.2-44.el5
gcc-4.1.2-44.el5
[code]....
when i login to one of our development server i get the following.
Last login: Tue Nov 23 14:08:32 2010 from 192.168.2.5
-bash: r: command not found
-bash: $: command not found
[code]....
For some reason crontab does not work on my system.
Fedora Core 11
I am running from a Virtual Private Server.
Code:
Code:
I have 5 websites running in a reverse proxy environment.On main server I am getting this error
Code:
NameVirtualHost *:80 has no VirtualHosts
[Wed May 12 12:18:10 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[code]...
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
View 4 Replies View RelatedI downloaded roundcube webmail and when I tried to run it, it said:
Code:
Fatal error: Class 'PEAR' not found in /srv/roundcubemail-0.5.3/program/include/iniset.php on line 132
What's the problem?