I am using gmote on my android phone to control my desktop. this works fine when guarddog is disabled and even though i have legato networking protocol enabled (this is the port range gmote is supposed to use 8889 and 9901) i am still having no luck locating my desktop with the firewall enabled.
View 2 RepliesI use Karmic 64 bit and have installed Guarddog. When i try to fire up empathy and gtalk, network connection is refused. Clearly, I need to allow a protocol in guarddog. Gtalk uses (I believe) XMPP - which is not listed in Guarddog.
what I could do to let Empathy connect to gtalk servers?
I installed Gmote 2.0 yesterday and it worked like a charm the first time and I could use most of it's features. But then after restarting the computer, I can not get my phone to find the server running on my computer anymore. I have tried whatever that came to my mind but it has not been successful.The first time, it just found it without any delays, but seems to be unable to do that now.
View 1 Replies View RelatedIm trying to install gmote but nothing is happening i run the .sh file and i see the terminal pop up really quick and go away i have also tried to copy and paste but as soon as i paste the terminal closes any pointers?
View 3 Replies View RelatedFollowing error message? basically trying to get Gmote to work under Lbuntu OS.
Web-browsing and Pointer working okay however whilst browsing music and video Gmote is crashing:-
Am using pre-installed VLC and Java/JRE.
For system calls, is blocking or non-blocking default in C? Simple question, just am not seeing the answer super quickly.
View 4 Replies View RelatedI have a device that is working on modbus protocol andI have written a small program(with block TCP read method ) to read its registers via modbus protocol.my program is working very well but except those times that I unplug the Ethernet cable or turning off the modbus gateway during programs work.at this time my program stops on recv system call (if it reach this system call exacly when I unplug Ethernet cable or turning off the modbus gateway during programs work).I changed my source to work in nonblock TCP method, at this time with the same situation my program does not stop/block on recv system call but after pluging back the Ethernet cable or resuming the connectivity situation back it reads data incorrectly .this is my code:Quote:
#define DEBUG
#include <fcntl.h>
#include <string.h>
[code]...
What the following means?
Code:
Does this mean that connections from those IP's have been blocked or what?
Would it be perfectly okay to install and use Guarddog firewall (a KDE program) in GNOME?
View 5 Replies View RelatedI'm running Jaunty. For some reason, I cannot run Pogo games when the firewall is enabled. I've tried allowed "direct play gaming", thinking that might help, but it didn't. So i guess I need a custom protocol. What ports does Pogo use so I can allow them? Hopefully someone knows... and yes, I do have java. Pogo works if I turn the firewall off. Also, Ktorrent does not work either. I happen to know the ports this one uses, but when I make the protocol, it still doesn't allow torrents to run. The ports I'm trying are 6881 and UDP 4444.
View 2 Replies View RelatedI just installed Slack 13.1 x64 on my laptop and set up multilib per Alien Bob's wiki. I even successfully compiled and installed grub afterwards. But, am having big problems trying to compile or install guarddog. On my 1st try, I downloaded guarddog from Slackbuilds and replaced the SlackBuild script with this one which is off a thread in this forum:
Code:
It **appears** to compile, but, no .tgz package is made. I have folders and files under /tmp/SBo.
So, then I went back to SlackBuilds and downloaded this, original, 12.2 SlackBuild file:
Code:
My question is quite simple:What are type of applications where socket in blocking mode can be used ?
And where non-blocking mode to be used ??
TCP is blocking by default.
Has someone using opensource SPICE [URL] wit WIN7 Prof. desktop across the low 2 Mbps WAN with 50ms latency? BTW we're using VMware View 4.6 Desktop with WIN7 Prof. (PCoIP) and have a lot performance problems across the WAN.
View 4 Replies View RelatedSo what I'm trying to do is write a USB stack for a uC, but beyond the 10 ms reset signals from the host I'm kind of lost. What happens after that? If someone could point me somewhere that explains it step by step in detail, instead of jumping around
View 2 Replies View RelatedI was trying to install a new protocol under ns2-34 when I execute make command, I got this error :
In file included from ./config.h:60,
from ./routing/address.h:38,
from ant/ant.cc:4:
/usr/local/include/tclcl.h:42: fatal error: tcl.h: Aucun fichier ou dossier de ce type
compilation terminated.
make: *** [ant/ant.o] Erreur 1
I can't find this tcl.h !! I don't know how to add this file !
Using CentOS 5.5. I have ssh setup to use a radius server for authentication. When I use filezilla to test sftp I can successfully authenticate and get directory listings, but every time I try to download or upload a file filezilla attempts to re-authenticate which fails because the radius server uses token auth with one time passwords, so the original password used to authenticate is no longer valid. However I can browse directories all I want and it never tries to re-authenticate.
1. is this re-auth just how sftp protocol was designed? like re-auth anytime a user tries a different action, like browse vs download vs upload?
2. or am I just missing something? (very likely, I'm not real experienced with linux)
I have Debian 8.4.0 with gnome gdm3 and NVIDIA GeForce 8400 GS. When I run some applications the following message appears:
Code: Select allname of display: :0
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 24 (X_GLXCreateNewContext)
Value in failed request: 0x0
Serial number of failed request: 33
Current serial number in output stream: 34
Previously, I had lightgdm instead of gdm3 and I fixed this problem allowing indirect GLX protocol just setting xserver-command=X -core +iglx in /usr/ share/lightdm/lightdm.conf.d/50-xserver-command.conf...Now I can't allog GLX protocol. I have tried the following:
Set Option "AllowIndirectGLXProtocol" "On" in xorg.conf Set serverargs="+iglx" in /usr/bin/startx Set exec /usr/bin/X in /etc/X11/xinit/xserverrc
Despite all this, the error message persists and xorg.0.log indicates that indirect GLX is disabled (line 19.477):
Code: Select all[ 17.604]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 17.604] X Protocol Version 11, Revision 0
[ 17.604] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 17.604] Current Operating System: Linux federueda-pc 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06) x86_64
[ 17.604] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=4156658f-15d7-43ae-b0ff-2dfc7484c3ab ro quiet
[code]...
In short, I don't find the way to enable indirect GLX in gdm3.
We are running in to a issue where we don't seem to get our bridging to work as we expected. Meaning passing all traffic from Point A to Point B. As explained below:
[Code]...
This is the original connection. Now we are adding our Linux IP impairment box for IP tables in between Application Server A and Router X so the figure would look as below: Application Server A --> IP Impairment box --> Router X --> router Y --> Application Server B
The issue we are having is When a packets are sent from Server A to Server B they are going through for PING, TCP, UDP, but for BGP the connection is established at a TCP level (SYN, SYN-ACK, ACK), but the BGP OPEN packet does not get through and our BGP relation ship does not come up between Application Server A and B. Application Server A and B are a routers also but there are applications running on those router. BGP is underlying protocol used for Application Server A to be talking with Application Server B and getting routes for each other.
Even with the iptables empty (all rules default ACCEPT) we still can't seem to get these BGP OPEN's through. We see both sides of the application servers sending BGP OPEN's, but the Linux bridge never passes those packets to the other side of the bridge. Tracking the BGP packets, we see the packets at iptables raw PREROUTING and filter FORWARD tables but the packet doesn't get out the other interface.
I've been struggling this morning trying to associate an application with a custom protocol, namely emacsclient and org-protocol.
I'm calling this protocol from a webbrowser bookmarklet, and I get the following behaviour :
In chromium, the "Launch Application" dialog comes up, and calls xdg-open org-protocol://... which ends up firing a new chromium frame.
In firefox, I've tried setting network.protocol-handler.app.org-protocol to an empty string or my emacsclient path, anyhow I get the following error message : "Firefox doesn't know how to open this address, because the protocol (org-protocol) isn't associated with any program" without even showing any external application selection dialog.
I'm not using any desktop environment, so I need to make this work strictly with xdg, however, despite reading the shared mime info spec etc, I still can't fathom a working configuration.
I installed ubuntu server 10.04 32-bit and I installed XRDP so I can connect to it using RDP sessions. I was wondering if there is a better alternative to it. I have the following issues with it: 1. When I connect to the server locally using rdp it works just fine the first time. Then when I close the session I cannot connect to it again (it says connection timed out). Then if I uninstall then reinstall it will work again for another time then do the same thing. 2. I receive a protocol error when using Windows 7 or RDP version 6.1.7600 (Newest RDP version)
View 9 Replies View RelatedI have linux running on a cd rom, whenever I need to start linux on my computer i just insert the cd. however I want to copy a dhcp protocol from my users folder from my computer to the linux cd rom. The name of the dhcp protocol file on my computer is /users/bennett/downloads/dualserverv6.83, soI am wondering how do I do this when I'm running the linux software from cd rom from the same pc.
View 1 Replies View Relatedi'm new in linux world i would like to know how can i add the rtp protocol to my iptables rule for Netfilter firewall,but without installing the asterisk server
View 1 Replies View RelatedI have linux running from a cd rom when I need to start linux. I have the dhcp program on my computer and I need to save it to the cd rom with the linux system on it. The dhcp program is in my /users/bennett/downloads/dualserverinstallationv6.83 folder. So how do I get ths save to my linux system on the cd rom so I can use it in Voiphopper.
View 1 Replies View Relatedi needed to implement leach protocol in ns2using linux redhat but i need the codes for leach protocol
View 2 Replies View RelatedI use ns-2.34 and I have a simple script and I want to use the xcp on it.
My script is:
Code:
In ns-2.34 there are a script which name is xcp-tcp.tcl.
I understand this scenario but I cant modify my script to work like this.
finding the best protocol for my server's file sharing. I will use this with 3 macs running 10.4.11 , one running 10.6.8, and one running 10.7 AND 10.6.7 AND Ubuntu 11.04. My server is going to be running Gentoo. I also need something where i can access it over the internet(and I'm using dyndns for my internet access(acessing from a outside machine)) with encryption and little hassle. I need the ability to be able to mount in finder and multiple users to be able to open a file.
View 2 Replies View RelatedI'd like VOIP that works. VOIP is essential for my work, video would be very, very nice for keeping in touch with loved ones (keeping in touch with little nieces as they grow up, that kind of thing). It would be nice to get Skype working, but a more open alternative would be good too. Skype worked fine with Mandriva 2008.0, I couldn't get it working with acceptable sound quality in 2008. 1 in spite of following instructions. Now it seems broken in 2009.0 too, with no clear instructions on how to make it work - I just don't want to get into another vortex. Especially since, as I now discover, Skype does not support the open "SIP" VOIP protocol.
I gather that MSN & Yahoo both do support it, and Google Talk supports other protocols for text (not sure about voice) so I could connect through Ekiga, for example. I just set up Ekiga Softphone - don't know if it will work, but it's asked me to set up port forwarding without giving me the first clue of how to do it or which ports to forward. I'm also thinking about changing to Debian - I want a distro that lets me configure it at install, setting up the system to be very light and fast. (I'm not really a Linux Geek, but at least I figure Debian should be well documented, and stable and fast enough to make it worth the trouble.) Does that affect my choice of VOIP?
I developed a protocol "it's a modification of OLSR" for wireless networks, it was with JAVA and I try to simulate it on NS2, I used AgentJ, so in the TCL I did any thing like usual;
set val(chan) Channel/WirelessChannel ;# channel type
set val(prop)Propagation/TwoRayGround ;# radio-propagation model
set val(netif) Phy/WirelessPhy ;# network interface type
[code]....
and I didn't specified the protocol because I attached my nodes to the JAVA class responsible for the protocol, but when I run it generates errors, it claims the protocol to use, so I don't know how proceeding.
There is a protocol in use - for example when I use Firefox to do a query through Google - as I type into the search field the browser sends my characters - one at a time - to the server. As I recall, at one time I found the specification but I'm pulling a blank. As I recall it does a POST of each character as I enter it, and the server responds before I have entered a <CR>. I want to write a client side program that uses that protocol and need to see the spec.
View 2 Replies View RelatedHow to add new patch for leach protocol in ns2.34 in ubuntu9.10
View 8 Replies View Related