Ubuntu :: Getting 'Desktop Effects Could Not Be Enabled' Error While Trying To Enable 'compiz'
Apr 30, 2010
I am getting following error while trying to enable 'compiz' in 10.4.
"Desktop effects could not be enabled"
Output of [URL]
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
[Code]....
So, it looks like my hardware support all what it needs for Compiz. What else is going wrong here?
View 9 Replies
ADVERTISEMENT
Jan 19, 2011
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.
View 1 Replies
View Related
Apr 4, 2010
I'm running Karmic Koala 64 bit on my Lenovo T400 laptop with switchable graphics having both Intel and ATI video cards. I've set my bios to use the intel card only and turned the automatic switching off. So far so good, but I'd like to turn on compiz for basic window animations. When I try to start compiz by selecting
Code:
"Appearance Preferences" -> "Visual Effects" -> "Normal"
I get an error message saying "Desktop effects cannot be enabled"
Code:
"System" -> "Administration" -> "Hardware Drivers"
doesn't show any new drivers that could be installed. This was working out of the box when I first installed Karmic Koala a few month ago, but things got messed up when I installed the restricted drivers for my ATI card. Now I can enable compiz if I switch to ATI from my bios settings and install the drivers but I don't want to use it due to high power consumption and I've removed the ATI drivers.
Here is my xorg.conf file:
Code:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]....
View 6 Replies
View Related
Jun 25, 2010
i 'am try to enable desktop effects for compiz .., but i get this message Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
My laptop is Hp Mini notebook 2133 im using Fedora 13,
my video card it's VIA CN896/VN896/P4M900
View 2 Replies
View Related
Apr 18, 2011
im using awn as my dock, and i'd really like to get some themes going to make it look a little nicer. when i go to the themes tab, it tells me "You need to enable desktop effects (compositor) to apply and customize themes".So in compiz how do i go about enabling them?
View 8 Replies
View Related
Jun 22, 2011
I have a Dell Latitude D520 with an Intel 945GM Integrated Graphics Card. I have been unable to get the desktop effects to work in either Jaunty or Karmic. When selecting Normal/Extra/Custom, I get an error:
Code:
Desktop effects could not be enabled
Graphics card info:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 942/940GML Express Integrated Graphics Controller (rev 03) I've looked at countless threads pertaining to this issue, but nothing I could find resolved my issue.
View 7 Replies
View Related
Apr 29, 2010
I go to preferences/appearance to set my visual effects at extra and get an arror message: desktop effects could not be enabled, I tried normal with the same result.
View 4 Replies
View Related
Jul 16, 2010
When I run tvtime with the desktop effects enabled Xorg, compiz and tvtime use a lot of cpu. It's even worse with tvtime in full screen. This doesn't happen with the desktop effects off or when I use vlc for example. The system is a 3GHz P4 Prescott, 1.7GB Ram, Nvidia FX5500. I'm running 11.3 with the nvidia video driver (173.14.27).
View 2 Replies
View Related
Jan 31, 2011
Not quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
View 9 Replies
View Related
May 8, 2010
Well, wouldn't you just know it? I encountered problems when upgrading from 9.10 to 10.04 with update-manager. What a surprise. Anyway, here are the problems:1. Cannot enable desktop effects. Error appears after searching for drivers.
2. 2-3 minute boot times. Used to be 40 seconds. It spends 2 *minutes* in the BIOS before actually starting Ubuntu.
3. The volume controls on my laptop's keyboard now control PCM rather than Master, so everything is horrifically loud past three clicks, and two quiet under that.
4. The bootsplash displays at 1280x800, my monitor's resolution, and looks pretty. The log in screen, however, switches to what looks like 1024x768. When I log in it changes back to 1280x800.
5. Cannot boot into Windows from grub. When I select Windows, a blinking cursor appears in the top left corner and stays there. Nothing happens
View 1 Replies
View Related
Jan 21, 2011
I just recieved my new PC. While installing 10.10 i'm having some issue enabling visual effects. When I try anything but "None" I get an error that says "Desktop effects can not be enabled". When I try to run compiz from the terminal I get:
compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager. Also when I try to edit the xorg.conf file it's not there.....is this normal?nWhat can I do to enable effects with my Radeon HD 5670?
View 9 Replies
View Related
Jan 21, 2011
I have PC with Motherboard Intel Desktop Board D945GCNL, and Ubuntu 10.10 installed on it. Graphic card was working fine, but recently i don't know what happen suddenly the visual effects stop working, and i believe the issue with the identification of the VGA. with error message "Desktop effects could not be enabled" i checked some forums related but wasn't able to solve it. when i type compiz. it stuck on the below:
[Code]....
View 9 Replies
View Related
May 1, 2010
I can't enable visual effects. I've been scouring Google for things to try for way too long at this point. I think I've tried it all. I'm using ubuntu 9.10. I've got an nvidia card. Interestingly, I've had the visual effects working on this computer on two different occasions. Once a couple years ago, then I reformatted and had them working again. Then when I shut my computer off a few months ago, all of my X settings got erased, and from that point on, I was never able to get visual effects enabled again.
When I try to enable visual effects I get the error: "Desktop effects could not be enabled" I'm running the nvidia 185 driver, although I've tried the 173 driver with the same results. If I try doing compiz from the command line, I get this:
[Code]...
BTW, the message that says you can't post links in your messages until you have 15 posts is extremely misleading (and made me very frustrated). I had a few (at) symbols in my post and didn't realize that was the problem, because I was looking for some kind of URL, since that's what the error message said was the problem. I was about to give up hope on even posting this message! Oh well, I figured it out.
View 6 Replies
View Related
Mar 23, 2010
I am extremely new to Linux and cannot seem to get Compiz Fusion working. I am running Xubuntu 9.10. I enabled my video driver but the effects still aren't working.
View 1 Replies
View Related
Aug 26, 2010
im using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies
View Related
Apr 7, 2010
A friend whom I turned on to Ubuntu with 9.10 recently connected a projector to watch a movie off her laptop. When it was connected, the laptop screen changed and it was clear that desktop effects through compiz were disabled. Thing is, since disconnecting the projector, I cannot get the effects back.If I go into Preferences - Appearance and click to enable Normal or Extra Visual Effects, the same thing happens. I.e. I get a popup saying Searching for hardware driver...and after about 20 seconds, the screen flashes a bit, and says
Desktop effects could not be enabled. Not sure why it's searching for a hardware driver. The computer doesn't require any 3rd party hardware drivers to be enabled - it doesn't have an nVidia card or anything like that.If it makes a difference, she yanked the VGA cord out without setting the display mode back to just her laptop with the FN and F key combo.I've tried:
-Reinstalling compiz
-Tinkering with options under Preferences - Display
-Ensuring that nothing is available under Preferences - Hardware Drivers
View 1 Replies
View Related
May 13, 2010
I have installed Lucid on my old T61p. And I am using the NVidia driver Nouveau. But I cannot work out how to enable compiz with it. Is it possible to have composite effects with this driver?
View 3 Replies
View Related
Apr 30, 2010
I've just completed a successful clean install of Ubuntu 10.04 LTS (32 bit).Out of the box, Desktop effects worked flawlessly.However, after installing the Ati driver from the Hardware Drivers utility, when I try to enable Normal desktop effects (Instead of None) I get a message saying "Desktop Effects Could Not Be Enabled". The Hardware Drivers utility says "Driver is installed and currently in use"
Installing and running glxgears from a terminal gives the error: "Segmentation Fault".The hardware in question is an Ati Radeon 4xxx series (I think it's a 4800 but can't remember exactly)
View 2 Replies
View Related
Jul 17, 2010
how do i enable visual effects. whenever i click to enable it says searching for available driver. then it says desktop effects can not be enabled. I am trying to enable them so i can do the cube and stuff.
View 5 Replies
View Related
Dec 20, 2010
For reasons I cannot fathom my desktop effects have stopped working in Ubuntu 10.10 64 bit, I have an Intel chipset and it was running fine, now they have stopped working.I have tried updating intel PPA's, Compiz PPA's and even X PPA's but nothing works
View 6 Replies
View Related
Feb 7, 2011
I can't enable my desktop effects. That is when I try to do so I get the error: Quote:Desktop effects can't be enabled.
View 9 Replies
View Related
Mar 15, 2011
I have to open another DECNBE thread just because I didn't manage to find a solution by studying all the other related stories that took place here in Ubuntuforums.org.Here is my output from Compiz-Check
Code:
paneas@ubuntu:~/Downloads/compiz-check$ ./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
[Code]...
View 4 Replies
View Related
Jul 6, 2010
I have an HP Proliant DL380 G6 server (relatively new), and I can't enable desktop effects. I'd think even a recent integrated GPU would be able to do this right? Why can't I do it?
View 4 Replies
View Related
Dec 7, 2010
I'm currently running Ubuntu 10.10 on VMware.My computeas a NVidia 8800GT graphics card.I'm trying to activate the Desktop Effects but keep getting the following error message: "Desktop Effects could not be enabled"I'm very new to Linux so I'm still in the extreme learning phase.My goal is to get Compiz to work. I was able to download/install it but I don't think it's working because of the Desktop Effects issue I have
View 4 Replies
View Related
Jan 16, 2011
am running Linux mint ver. 10 I can't enable desktop effects,where can i see which display driver i use ?Inside Additional driver all i see is VM VirtualBox Guest additional for linux module
View 2 Replies
View Related
Dec 21, 2010
I updated to latest -current last night and since then have not been able to login to my KDE desktop. After typing in the password, I get the starter icons come up, and just as the last one comes up, the desktop logs out to the login screen again. I worked out that it was because desktop effects were enabled - disabling these in kwinrc allows me to login, although without desktop effects.Using NVidia 256.53 binary drivers b.t.w.
View 3 Replies
View Related
May 30, 2010
I attempted to install the mesa-dri-drivers-experimental package and my screen became unusable when I enabled desktop effects. I then uninstalled mesa-dri-drivers-experimental and tried to install the akmod before realizing that my card isn't supported yet. Now I can't seem to do anyting to get my screen back. I removed the blacklist on nouveau, but my screen still goes black after fedora boots. Is there any way I can just get things back to default without reinstalling the whole system?
View 1 Replies
View Related
Feb 22, 2010
So I was messing around on my laptop this morning and I noticed that my desktop effects were turned off. So i decided to turn them on but as soon as i pressed the "normal" option a pop up opens up and says "searching for drivers" then the screen flickers and finally it tells me "desktop effects cannot be enabled". Also my compizconfig wasn't functioning. for exmaple: I turn on wobble windows and nothing happens. No wobble windows.
View 6 Replies
View Related
Jul 2, 2010
I hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
View 6 Replies
View Related
Apr 2, 2010
I am unable to run compiz or set any advanced desktop effects in my Ubuntu 9.10 running under VMware Workstation 7.1. This is the output of the compiz command:
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
No whitelisted driver found
aborting and using fallback: xterm
no xterm found, exiting
What does all that mean exactly?
View 9 Replies
View Related
