Ubuntu :: GRUB Lost After Re-installing Windows / Stop It To Do So?

Jun 9, 2010

I need some help getting GRUB back after re-installing Windows. Now I don't have access to my ubuntu partition and the installation disk

View 7 Replies


ADVERTISEMENT

Ubuntu :: Grub - Lost My Windows Partition - Can't Find Menu.lst In /boot/grub

Nov 1, 2010

I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.

After "fdisk -l",

I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?

View 24 Replies View Related

OpenSUSE Install :: Grub Lost On Installing Window7?

Apr 22, 2010

I lost grub on installing window7 , used caf,s way Re-Install Grub Quickly with Parted Magic - openSUSE Forums to install but on typing find /boot/grub/menu.lst it does on find menu.lst however i could see the file by mounting the right drive. I dont want to fresh install suse to get grub

View 9 Replies View Related

Ubuntu :: GRUB Lost Sight Of Windows XP?

Sep 1, 2010

I did a dual boot install of Ubuntu 9.10. After that, when I rebooted my Windows XP was gone? I did update-grub and still nothing. I popped in the GRUB Super boot Disk 2 and browsed around, I think i found it but it says "Error: Invalid Signature". Iv googled and havent found a solution to this yet.

I booted off a XP CD into the recovery console, it sees my Windows partition and lets me get into it and browse all my files. So I know its there. I then tried fixmbr then fixboot and now all it loads is my Recovery Partition. I booted up SuperGrubDisk again and same results, it just sees my Ubuntu. I reinstalled grub and back to square 1. Then I tried a checkdsk /r and tried it all over again. Nothin'.

I have some encrypted files on my drive using EFS....i guess it would be ok to loose them, but I put a lot of work into them..

how I can "wakeup" my XP again?

View 5 Replies View Related

Ubuntu :: Recover Partition And Grub Lost From Windows?

Dec 8, 2010

I installed Ext2fsd from windows XP because I needed access to a text file on my ubuntu install. However, it didn't work because the drive is ext4 and all it listed was the root folders (/home, /var etc..) nothing any deeper.

I closed the app and continued working in windows.

Today I went to start my computer and it loaded the grub-rescue> prompt. I immediately tried to run "help" to find out what happened, however, grub reported the command as unknown.

I then ls and got a partial listing of the partitions.

Code:
(hd0) (hd0,5) (hd0,1) (fd0)

So what do I do? How do I recover my linux partition? If the partition is bad - then how is the bios able to find the grub-rescue> prompt?

View 5 Replies View Related

Ubuntu Installation :: 9.04 - Lost Grub Legacy In Windows Reinstall

Jun 19, 2010

I dual-boot ubuntu 9.04 and windows 7. I recently reinstalled windows, and it wiped grub-legacy off of my MBR. Reinstalling grub shouldn't be tough, right, especially with clear instructions? Anyway, I can't get anywhere with the official instructions here: [URL]. The first issue is that the current live CD has no program "grub" in terminal. I dug up an old live cd, but I couldn't get anything with the directions:

Find where Grub is. If this gives a few different answers then you will need to find the correct one, perhaps by trial-and-error.
find /boot/grub/stage1
That command didn't find anything, nor did some similar commands found on google.

So I'm really at a loss. What should I do?
-Can I install Grub 2 on my MBR? Will that work with 9.04?
-Can I access my 9.04 install, copy files to Windows, and then just format the partition and clean install 10.04?

View 1 Replies View Related

Ubuntu Installation :: Lost Windows Entry In Grub After Update

Jul 9, 2010

Ubuntu's update manager recently updated the Grub menu.lst file. It let me decide if I wanted to keep my old menu.lst or the new one. After deciding that I was fine with the new one, I found out that I can no longer boot into Windows 7. I had previously edited menu.lst so that Windows would be at the top of the list, however, I didn't notice that this had put it into the automagic update area, and I realize now that I should have just edited what the default number was instead of moving around the entries.

Anyways, I can no longer access my Windows 7 OS via Grub, and I was wondering what sort of fix I can have for this. I've tried running update-grub, but it hasn't fixed the problem. The Windows bootloader is on the first partition of the only hard drive, as far as I can remember.

View 9 Replies View Related

Ubuntu :: Lost Windows Entry On Grub-2 After Trying To Reorder Entries?

May 31, 2011

I followed the instructions from this post to reorder my boot options. But somehow I was stupid enough not to copy the windows entry, as indicated (I was mainly following only terminal instructions and such).Now I have a grub menu without my Windows 7 entry, please tell me there is a way to restore it.

View 9 Replies View Related

Ubuntu Installation :: Setup Windows On Server - Lost Grub Now

Aug 9, 2011

I setup windows on my ubuntu server. I loss grub now. What I should do?

View 1 Replies View Related

Fedora :: Grub - Lost Windows Boot Loader?

Aug 10, 2009

I just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..

-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)

-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...

Here is my fdisk -l

Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 192 5414 41943040 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
code....

View 3 Replies View Related

Server :: GRUB Boot Loader Lost / Install It From Windows?

May 26, 2010

I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?

View 2 Replies View Related

Ubuntu Installation :: Lost Grub Menu After Windows Server 2008 Install?

May 25, 2011

I was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.

View 9 Replies View Related

Fedora Installation :: Lost Windows Vista After Installing F12 / Get It Back?

Apr 15, 2010

After installing Fedora 12 from a live CD, I ended up that my Vista completly gone is.
In the grub loader, I cannot see my Vista boot record.

I thought when installing, I choose 'use free space', as there I reservered 7 gigabyte for Fedora.

I can see all the files including my Windows directories and home.

Is there a possibility that I can recover my Vista? and so, make it dual boot?

View 2 Replies View Related

Ubuntu Installation :: Lost Grub Boot Of Windows XP / Getting Blank Screen With A Flashing Cursor?

May 1, 2010

I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.

View 5 Replies View Related

Ubuntu Installation :: Lost Windows 7 Boot Option In Grub - Error 12: Invalid Device Request

Jan 12, 2011

I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.

root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders

[code]....

I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.

title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1

When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?

View 9 Replies View Related

Ubuntu :: Installing Windows 7 Without Messing Up - GRUB

May 14, 2010

I'm thinking about upgrading my Windows Vista to Windows 7. I rarely ever use it but I figured that when I do have to use it I would rather use Windows 7.

Will it mess up Ubuntu or GRUB when I do this? Like GRUB not recognizing Ubuntu any more? I don't really know but I just wanted to ask this here just in case.

View 6 Replies View Related

Ubuntu :: Grub Uninstalled After Installing Windows

May 27, 2010

I have updated my Windows from Vista to 7. I knew that this would mess up my GRUB so that it wouldn't show on boot. However, it seems as if my GRUB has uninstalled.

I have tried to reinstall it with a Live CD but this didn't work. Maybe I was doing something wrong. I'm sorry if I'm asking a question that has already been posted but I could only find ways to make your GRUB reappear, not reinstall it.

I'm stuck with Windows 7 for a week or two now and I really want to get back to using Ubuntu!

View 2 Replies View Related

Ubuntu :: Uninstall And GRUB By Installing Windows 7?

Jun 10, 2010

I have my system set up to dual boot Ubuntu 9.10 Karmic Koala and Windows XP Pro, using GRUB 2 (1.97~beta4) as the boot loader. I want to remove Ubuntu and GRUB 2 from the system and install Windows 7 in a dual boot environment with Windows XP. My concern is to be sure that in the process of removing Ubuntu I do not make my system unbootable by removing or otherwise screwing up GRUB without replacing it with the Windows boot loader.

I read a suggestion saying that the most straightforward way to do what I want is to simply install Windows 7 and, during the install process, select my current Ubuntu ext3 partition as the Windows 7 system partition. The suggestion said the Windows 7 install process would overwrite the MBR with the Windows boot loader, effectively uninstalling GRUB 2. The Windows boot loader will find the existing XP installation and give me a choice between Windows 7 and XP at boot time. Does that scenario sound right? Would it work the way I have described it? (I know I would no longer have Ubuntu. That is OK; I intend to reinstall it later.)

For what it is worth, here is my current partition layout:

/dev/hda - 320 GiB internal hard drive
/dev/hda1 - 37.26 GiB ntfs boot (Windows XP)
/dev/hda2 - 18.63 GiB ext3 (Ubuntu 9.10 /root)
/dev/hda3 - 1.69 GiB linux-swap
/dev/hda4 - 240.51 GiB extended

[Code]...

View 4 Replies View Related

Ubuntu :: Restoring Grub After Installing Windows?

Jul 5, 2009

I had to install windows for my sister, and I had a 20gb partition there for backup ( /data/ ), and well, that's where I was going for. After reformatting and installing Windows, I try restoring grub and this is what I get:

Code: grub> root (hd0,5)
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes

[code]...

Probing devices to guess BIOS drives. This may take a long time. /dev/hda: Not found or not a block device. Searching for an alternative way to install it, I found that if I 'installed' Ubuntu over my Ubuntu partition, it would automatically restore grub. But when I get to the partition tables, I get a message saying that "The computer has no operating systems on it" and it considers my hard drive as empty.

View 5 Replies View Related

Ubuntu :: Install And Configure Grub After Installing Windows?

Nov 29, 2010

I installed in ubuntu 10.04 in my laptop
yesterday i needed windows and had to install it
so right no am unable to boot in ubuntu without my live cd
when i was installing ubuntu eather unchaked to install the bootloader or i installed it not on partition but starit on the drive on the /sda
am able to boot in my ubuntu with the live cd by typing in parameter :grub.
i really need grub boot loader in this computer to be able to chose to boot in windows or ubuntu
i tried couple of instructions and always goat some headache.

View 2 Replies View Related

General :: Windows XP Won't Boot With Grub After Installing Ubuntu 8.04?

Jul 8, 2009

I am completely new to Linux as of today.I finally took the plunge and downloaded and installed Ubuntu 8.04 on my Windows XP computer (dual boot), using the Ubuntu installation wizard to "make room" on my hard drive for Ubuntu by creating a separate partition. The installation finished successfully and Linux boots just fine, but Windows XP will no longer boot at all.

I have read many threads on this and other sites, giving advice of how to correct this problem. I am not at all experienced in editing and working with different ways of booting (other than Windows default). But after some frustration, I located (according to the threads) a couple places to try making changes to the boot commands and I tried various lists that were suggested. Before I changed anything, the Windows XP boot screen would appear and then it would revert right back to Grub.

[code]....

what drive number Ubuntu and/or Grub installed to, or assigned to the Windows partition, and I have no idea how to find out. I do not have a Windows XP installation CD (it came pre-installed on my computer), so I CANNOT wipe out that partition and simply reinstall it--I MUST be able to fix the problem without harming Windows!!! I also have data in the Windows partition that I don't want to lose. I could possibly uninstall and reinstall Ubuntu (as I saw suggested somewhere online), but I have not the slightest clue how to accomplish that task--and WHAT IF it didn't work?

View 23 Replies View Related

General :: Installing Windows XP Using GRUB?

Aug 29, 2009

I have 2 hard disks. In the first one, I have installed Archlinux, with GRUB. The second one is empty. I have a Windows XP .iso file. Is it possible to install Windows XP in the second hd, without having to burn the ISO file? I don't have got any CD recorder/reader.

View 2 Replies View Related

General :: Installing The Grub In Windows?

Sep 22, 2009

I am using windows XP.I wish to install GRUB bootloader so that I can modify menu.lst & add lines to boot from an ext2 partition having iso of linux distro.One way is to use live cd & try 'sudo grub-install <device>' but I don't have live cd.I came to know about open source software 'wingrub' but I am not able to understand how to use it even after reading [URL] what should I do to install GRUB in mbr & have option to boot to c drive which has windows & another partition (/dev/sda2) which has linux.

View 5 Replies View Related

Ubuntu Installation :: Restoring Grub Failed After Installing Windows XP?

May 21, 2010

I am pretty new to ubuntu, and not sure if this question has been solved by anyone, I tried search this forum, but didn't find enough information. The closest thread I found here was this one:[URL].. Here is my situation, I have installed Ubuntu 9.04 a few days ago with an old Live CD, after running it pretty well, I upgraded it to 9.10 with the online update tool. (I guess this makes sure I was using Grub 1, the legacy Grub). After updated to 9.10, I installed a Windows XP on my hard drive, obviously, it wiped off my Grub from the MBR. So I tried to restore the Grub back to the MBR, but failed, please see below:I first run the fdisk

Code:
ubuntu@ubuntu:~$ sudo fdisk -l
omitting empty partition (5)
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]...

View 9 Replies View Related

Debian :: How To Config Grub After Installing Windows 10

Aug 16, 2015

I have 2 HDDs, and under linux, sda is ntfs, sdb is ext4 of debian jessie, the booting order is sdb ( it contains the grub on sdb's MBR) then sda, the windows boot loader on its own MBR.

The sda was win8, but now just formatted it and did a fresh installation of win10. After power off PC and plug the sdb up again. Turn on the power, setup the booting prior as same as above, but, the grub can not realize the windows 10 boot sector, error message is: no such device /dev/sda1... (and following a digit array) 8xxxxxxxxxxxx....

How to config grub in order to make it can dual boot both Operating System?

View 1 Replies View Related

Fedora Installation :: No GRUB After Re-installing Windows / Get That?

Dec 20, 2009

I have windows and I installed fedora 12 on a separate partition.

However, I had a problem with my windows XP SP 3 and had to install windows. Which I did on my C drive. However, when I re-boot I on longer get the GRUB loader displayed so cannot boot into fedora.

Is there anything I can do?

View 2 Replies View Related

Software :: Restore GRUB After Installing Windows 7?

Dec 26, 2009

have an Intel Core2 Duo system that would dual boot via GRUB between Windows Vista and Fedora 10. I recently attempted to upgrade from Vista to Windows 7, however because the version of Vista I had would not upgrade to Windows7. This has removed the ability to boot into my Fedora 10 installation. After some brief research on the Internet, I created a Live CD of Fedora 12, and booted into that. Accessing the terminal I tried typing:

[liveuser@localhost ~]$ su root
[root@localhost liveuser]# grub

Probing devices to guess BIOS drives. This may take a long time.

GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB

[code]....

Error 15: File not found

What is needed so I can restore GRUB on my system and boot into Fedora again?`

View 11 Replies View Related

General :: Reinstall GRUB After Installing Windows Vista?

Sep 1, 2010

I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?

View 1 Replies View Related

Software :: Installing Grub From Scratch To Boot Windows?

Jan 11, 2010

Since CloneZilla doesn't include the MBR when saving a partition into a file, I need to take care of this myself. With a working XP in /sda1, I'd like to...

1. Boot with a Linux live CD

2. replace the Windows MBR with Grub, ie. without any Linux already installed

3. save Grub's configuration files into /sda2 (which is ext2fs-formatted)

4. add XP to Grub

View 5 Replies View Related

Debian Configuration :: Restoring Lenny's GRUB After Installing Windows XP Elsewhere?

Feb 21, 2010

My computer initially had one hard drive, with Debian Lenny 5.0.4 installed. I haven't done any special configuration, so upon boot, I was presented with the GRUB kernel select menu, then gdm, etc. I think I used the Debian installer's 'use entire drive with LVM' configuration.

I then added a second hard drive, with the intention of installing Windows XP on it. After I installed XP on this second drive, I found out that it had overwritten the MBR on the first drive. (It was my intention do use the BIOS' F8-key boot menu to choose between the two drives, each with their own distinct boot loader. The two drives and OS's would be completely independent.)

Using my Debian installer CD, I think I have GRUB installed on the first drive again. I've found a number of tutorials which say I can use 'set' and 'linux' to boot the system, but the linux command always returns a file not found error.

I think my LVM filesystem is still intact, as the Debian installer's fdisk reports it, it can also chroot to it and my installation appears to be intact. 'ls' within GRUB shows (derek-swap_1) (derek-root) (hd0) (hd0,1) (hd0,2) (hd1) (hd1,1) (fd0) . 'derek' was the hostname I used.

I would like to simply restore the system to the way it was before: with the standard GRUB that comes with Debian 5.0.4, which then boots into the debian with my LVM filesystem. Is there a way to do this from the Debian installer CD? (I was hoping there would be a 'dummy install' command which would install GRUB and configure it properly, but leave all my existing partitions and filesystems intact.)

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved