Ubuntu :: GNOME3 Has Released Anyone Succeed Install It On 10.10?
Apr 7, 2011GNOME3 has released anyone succeed install it on ubuntu 10.10??..
View 5 RepliesGNOME3 has released anyone succeed install it on ubuntu 10.10??..
View 5 RepliesI am trying to solve multiple issues with my 64x natty install using gnome3 ppa( official ppa from gnome3). I have this setup on two machines, one is a fresh install the other is a upgrade. They both have most of these issues. Here they are: 1) Nautilus will not launch from the favorites bar. It does launch from a shortcut on the desktop. It will not run from the terminal unless I am root. 2) Number lock is disabled at startup (enabled in my bios). I used to be able to enable after nattty had started, I no longer can, though num lock light is lit - number keypad does not work!
3) I have set gnome3 set to let nautilus draw the background and desktop, I get a white screen at boot until Nautilus is launched then I get a background and some desktop icons(no computer or network icons). If I plug in a usb drive the icon appears on my desktop, when I select it I loose the background and have to select it again.
4) Wireless randomly will drop the connection, have to reconnect, sometimes it will, sometimes I have to reboot. I have Fedora installed on a 2nd hard drive on the machine with a clean install and the only similarity is it displays the default desktop until I launch Nautilus, then my background and desktop are displayed with all of the icons. From there on out Fedora has none of these issues. I have used Ubuntu Gnome and XFCE as my only os since 6.0 and have never had this many problems. Both machines would not run the gdm because of Nvidia issues after the upgrade and clean install. I DO NOT want to give up on Ubuntu as I tell all my friends and family to use it.
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code].....
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
I'm currently on Ubuntu 10.04 Beta 2, is it on the safer side to reinstall ubuntu all over again when it's released or it doesn't make any difference ?
View 9 Replies View Relatedhow to install gnome3 on ubuntu 11.04 without problem ?
View 1 Replies View Relatedwhen I try to install gnome3-session it says I have miising depends and broken packages. I have no broken packages and cant seem to get past the depends.
[Code]....
I installed gnome-shell from the respective PPA on my 11.04 ubuntu installation and I have problems running this combination smoothly! Sometimes when I log in I get Metacity windows and no Gnome session, sometimes I get the correct Gnome3 session...I guess that somehow the packages I have installed on my system got mixed up.Anyway: when I try to "sudo apt-get install gnome3-session" I get the following error:Quote:
The following packages have unmet dependencies:
gnome3-session : Depends: gnome-session-bin (< 2.33) but 3.0.1-0ubuntu1~build2 is to be installed
Depends: gnome-session-common (= 2.32.1-0ubuntu20) but 3.0.1-0ubuntu1~build2 is to be installed
[code]....
how to install gnome3 in place of unity. is switching to Gnome3 a good idea. cant we keep both G3 & Unity and switch in between.
View 6 Replies View RelatedSo I glossed over the fact that installing Gnome3 from the PPA would break Unity for some reason, and now it's broken, and I can't even check it out. Is there a way to recover it and/or remove Gnome3, or is it a case of being out of luck unless I do a full reinstall?
View 4 Replies View RelatedInstalling gnome3 on 11.04 kills unity and even gnome2. I heard installing gnome3 from source solves the problem, any one tried that? I want gnome3 to be alone, if I change its wallpaper I don't want gnome2 or unity wallpaper to be changed.
View 1 Replies View Relatedhow to install gnome3 in debian? have anyone done this successfully? 3Q aptitude install -t experimental -r gnome3-session this method does not work for me.
View 14 Replies View RelatedBelow is the link that promises that the OpenSUSE release the Gnome 3 respin the day Gnome 3 is released.
openSUSE:GNOME features - openSUSE
Gnome 3 released yesterday but I see there is n activity so far in terms of re-spin. let me know if I'm missing something or the re-spin is not going to take place anymore. I was eagerly waiting for the GNOME3 so that I can use the respin version of OpenSUSE.
I used this option( int resize=16384; setsockopt((fd, SOL_SOCKET, SO_RCVBUF, &resize, sizeof(int)) ) to try to change my rcv socket buffer size. The option succeeded but the buffer size stayed at 4096. Can I actually change the buffer size with this option or is it hard coded into the kernel
View 5 Replies View RelatedI can connect to my Server from Machine1 via ssh locally (192.168.1.100) However, I failed to do so when connect from outside (210.xxxxxx) I've tried to turn off the Firewall(s) (in linux and router). But no good. My Server is in DMZ, I don't know if any related issue created from it.
View 2 Replies View RelatedIm trying to install GNOME-3 on top of kde and have GNOME DE option show up in kdm. I have SUSE DVD and have set local(OD) repository priority to 80 in order to get most packages from DVD. Inspite of that YaST pulls packages from online repositories, it may be the latest version. I have 8 MbPS dsl but the YaST download speeds are around 500B. How do I change mirrors of repositories. In my opinion this has nothing to do with ipv6, I use ipv6 for openBSD and it get good browsing speeds. Im trying to set kdm4 login manager but it doesnt start after enabling for YaST-/etc/sysconfig.
View 1 Replies View RelatedI tried to install lshw to be able to list me hardware. lshw is not in synaptic. I found this page [URL] .... and from there went to [URL] .... where I read:
You should be able to use any of the listed mirrors by adding a line to your /etc/apt/sources.list like this:
deb http://ftp.de.debian.org/debian wheezy main
Replacing ftp.de.debian.org/debian with the mirror in question.
i have dell labtop , latitude d420. i installed centos , but when the installation was over my wireless botton on my laptop off. only the bletooth button was on. Can someone help how i can install the wifi driver on my laptop using centos. i tried a series of description online but i did not succeed. i have a list here below. Can someone tell me where the wifi driver is found this list and how i can install it
[root@wisetech ~]# lsmod
Module Size Used by
ip6table_filter 6849 1
ip6_tables 18053 1 ip6table_filter
ip_conntrack_ftp 11569 0
[Code]...
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
As you can see here Linux Dc++ 1.1.0 have just been uploaded: [url] for some reason i still have 1.0.3 but i use Maverick and there are no debs for Maverick as of now so i'll just wait for there release.
View 1 Replies View RelatedI've upgraded from 9.10 to 10.04 a few days ago.Sometimes when I am typing on (USB) keyboard random key starts to repeat, as if I am holding it down (but I am not). Repetition stops when I press some other key. This is happening randomly. Sometimes 3 times in 5 minutes, sometimes once in 2 hours. I feel like it's load dependent (it occurs more often under higher load).Does anyone have idea how to get rid of it? It is really annoying.I have tried several keyboards to prove it is not hardware issue.
View 6 Replies View RelatedDoes anyone know when libreoffice will be released in the Ubuntu Repository?
View 1 Replies View RelatedWhat is the latest kernel released for lucid? I have linux headers 2.6.32.21 and linux headers 2.6.22.386 but I do not think they are correct.
View 1 Replies View RelatedI updated my computer yesterday and ever since when I delete something from my second hard drive it no longer goes into the trash. It not only does that but does not release disk space so now I have a blocked hard drive. I have tried deleting .trash-1000 as root but that only created a folder called .trash-0 and did not do anything. I am running kubuntu lucid lynx kernel ver. 2.6.32-31-generic
View 5 Replies View Related-> Announced in the Changelog.
View 14 Replies View RelatedWhat are the chances of super smart phones being released?Devices which look like normal smart phones, but have the ability to run a full blown linux distro like ubuntu and have the power to play 1080p files, which also come with docking stations so you can plugin an external display, usb keyboard and mouse, so at home, it can be used as a normal desktop PC...Possibly using the ION based NVIDIA GPU with dual core 64bit processor!
View 1 Replies View RelatedOr, r we just gonna wait for the final release which isnt far away anyways ; by the way, on mozilla 's site, i only see i686 source code, im using opensuse 11.4 64bit,so wondering if there is a 64bit version
i prefer having it in the repository, but i can just build it myself
Maybe new kernel has to be released in /patches ?
View 4 Replies View RelatedI'd like to announce the release of cmus 2.3.0 here. cmus 2.3.0 features gapless MP3 playback, native PulseAudio output plugin (which cures all the problems with PA ALSA emulation present in 2.2.0), very fast metadata cache and much improved compilations handling.
Not to mention tons of bugfixes since 2.2.0, which was released almost 3 years ago.[URL]..
I am thinking about upgrading my home computer to the beta. Having been burned by Microsoft's RC program and reloading my kids computers, I wondering if I will be able to move to the final release when it comes out at the end of the month. If the upgrade path from Beta->LTS is a complete reinstall, I'll wait.
View 2 Replies View Related