Ubuntu :: Flickering Screen After Fresh Install Of 11.04
May 22, 2011
I did a fresh install of Ubuntu Studio 11.04 on a machine with Vista previously installed. The computer also came with a Personal Media Drive (movable harddisk) of 500GB. The only modification to the HW conf is that I recently added a harddisk of 2 TB that I wanted to install Ubuntu on. (I.e. in total 4 harddisks on the scsi slots)I ran the install cd that I burnt form the iso and I chose the option to manually partition the disks, and I only partitioned the new Harddisk. The installer chose to make some partitions: grub as the boot loader, one ext4 partition of 2 TB and 3.5 GB swap space (and some kb of waste space).
The install cd was readable and the tests that could be performed on the install cd itself and on memory terminated ok, and install seemed to have worked fine. It also discovered the Vista / ntfs partitions. I thought the install would work ok since I had made the new disk the 1st to boot in the HDD boot priority in BIOS setup.
When I rebooted after install I got a blank screen. I then tried with making the Vista HDD the 1st to boot in BIOS, and then I got the GRUB screen with two options for ubuntu two for mem tests and two for the Vista partitions.I found it strange that GRUB would take over, since the grub partition should be on the new lower prioritized HDD in the boot order.When I run the first Vista option everything works. Vista boots. However, when trying to get it to boot either of the ubuntu options I get a flickering screen, in the normal ubuntu boot a white one where the upper third of the screen is more steadily lit up whereas the lower 2/3 is flickering. When booting with failsafe option the color is red/pink instead, but with the same flickering.
View 5 Replies
ADVERTISEMENT
Jan 5, 2010
I don't know if this has been asked already, but I cant seem to find it anywhere. I have a gateway, p 7915u with an nvidia 260gtx graphics card. im trying to install ubuntu 9.10 64-bit on it but the screen keeps flickering before I can even install it or try without change.
View 2 Replies
View Related
Jan 16, 2010
I downloaded the 9.10 from the Ubuntu website (not as torrent, but as direct download) and I burnt the ISO image in a CD. I intruduced the CD in the computer where I want to install Ubuntu and I rebooted it. Then the Ubuntu install-try menu appeared. I chose "try" and appeared a white ubuntu logo fading in and out, and then some text that was like the boot up of Ubuntu. In that point, the screen starts flickering every second, and when I push the power-off button of my computer it stops flickering and says something like "you pressed power off - please remove the CD and close the tray", and then the computer shuts down.
The same happens when I choose Install. At the point it appears a progress number (0%) of the file system, the screen starts flickering and the progress it seems it stops, or at less it's extremely slow.My computer it's a bit old but I think that's not the problem. It's a Pentium IV at 3'40Ghz, 1GB of RAM and what seems to have the problem, a Nvidia Quadro 256MB graphics card (I don't know the exact model but if you need it I can find it).
View 2 Replies
View Related
Jan 14, 2009
I've been trying to install Fedora 10 but the screen flickers about once every two seconds (not at set intervals though sometimes 5 seconds sometimes < 1 second).I've been searching around and all posts I've read about hh ave pointed to an nVidia driver bug which would make sense since I have an nVidia card but these were all posted back in summer of '08 so I'm not sure if it is still lingering.
View 2 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
May 1, 2010
My laptop: MSI AMD Athlon 64x2 Nvidia GeForce GO 6100.
I've done a fresh install of Ubuntu 10.04 and I end-up with a blank screen. I've also tried a fresh install of Xubuntu 10.04 and Kubuntu 10.04 and I get the same blank screen.
Ubuntu 9.10 was working perfectly though. So what do you think happened?
I installed the Ubuntu 10.04 livecd on my desktop and it works perfectly so I think it is not a burning problem.
View 5 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Aug 1, 2010
I just did an install of 10.04 from a CD. Now the mouse pointer has to be slightly above a button to click on the button. Also, the bottom bar of the screen is just a thin line and you can't see any of the controls on it and the top bar is too thick, with empty space about the menu items. It is like the whole screen is pushed down slightly.
There is nothing wrong with the monitor or the mouse because it all worked fine with 7.10 ubuntu, which was on the computer before I did the fresh install from the CD.
View 2 Replies
View Related
Aug 1, 2010
I just setup a Fujitsu s6231 lifebook with Lucid. When I boot there is no grub menu unless i press the "start" key. Then the only way i can get into the machine is by entering into recovery mode and booting in "safe graphics mode".
Everything works fine once I am able to log on the "safe graphic mode".
If i don't press the "start" key the ubuntu logo will flash for 3 seconds and then the screen goes blank and nothing happens.
View 3 Replies
View Related
Jul 30, 2010
Whenever i close and then open the lid of my Compaq nc6220 laptop the screen will flicker when actions are made like moving the mouse, opening a program or typing. This is a known problem for the Intel 915 card and the solution is to disable the RANDR process. The thing is i cannot get to the service managaer and the RANDR doesnt come up in BUM which i installed. Does anyone know how to disable RANDR or any other solutions to this very annoying problem?
View 4 Replies
View Related
Mar 11, 2011
I had 10.10 installed and decided to chance it by upgrading to the Alpha release 11.04.Graphic card is ATI Sapphire X1550 I think (512MB).Apart from trying to get used to the buggy interface (to be expected from the alpha), the screen keeps blinking, goes black for a second every 30 seconds.
View 3 Replies
View Related
Mar 21, 2011
When I first boot up it gets to the checking sensors, then freezes and the screen flickers all the time. I have to do a hard shutdown then when I turn the computer back on everything works normally in fact the boot time is greatly reduced! And so far the system has worked fine after the 2nd boot.Anyone had anything similar?
View 2 Replies
View Related
May 29, 2011
I am using Natty and its favoring me with too much of screen and cpu overloading problems.After some usage with movies or browsing, it gets a distortion and whole horizontal lines appear on the screen like a 8BIT distorted Video game. The background actually runs good, since i tried playing mp3 and got the error after wards. After distortion, the windows start flicker and changing. Is there any way to stop this?Second thing,The cpu easily becomes full while mounting drives or surfing itself.
View 9 Replies
View Related
Dec 8, 2009
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
View 11 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 3 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Mar 12, 2010
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
View 1 Replies
View Related
Jul 8, 2010
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
Jul 16, 2010
the screen flickering after installing opensuse 11.3? There are lines flickering on my screen horizontally. I have the Mobile Radeon HD 4200 graphics, ACER Aspire 4540 Laptop. I am currently using the default video driver rather than the proprietary driver.
View 3 Replies
View Related
Jan 4, 2010
I've just installed a fresh Ubuntu 9.10 (I'm using Windows 7), after completing the installation, may laptop rebooted but following the white icon of Ubuntu were the 2 lines "Ubuntu 9.10 computername tty1 ...etc" appears and I could not login due to flickering.
My laptop is T500 Lenovo with ATI Radeon HD3650.
View 1 Replies
View Related
May 16, 2010
I just connected my LCD TV to my desktop and now I get two things happening which I didn't get when I used a proper monitor:
the screen scrolls down and sort of flickers every minute or so, plus: every few minutes it goes competely 'blank' i.e. reverts to the blue screen of my TV when there is no signal.
It should be in Ubuntu NOT Kubuntu!
View 4 Replies
View Related
May 18, 2010
When attempting to boot into Ubuntu 10.04, the screen constantly flickers. It'll stay off for about 2-3 seconds, then come back on for <1 second. This constantly occurs. When reaching the main screen (I think), I attempt to move into a TTY terminal, but the flicker continues. I have attempted to reset the X Server, stop the X server, etc., issue remains. The monitor does not turn off during this flickering. I am able to type, obviously.
Here are my system specs:
AMD Athlon 64 X2 Dual (6000+)
2.00 GB RAM
ATI Radeon HD2600 XT (x2, Crossfire)
HP w2207h 22" Monitor, connected via HDMI
I also have VGA inputs on the back of the monitor and can attempt to switch the input, but that requires me to dig through a box looking for a cable, so I figured I'd post this issue first.
View 1 Replies
View Related
Dec 31, 2010
I've installed a fresh Debian amd64 DVD version on my small HP Compaq 6537s / AMD Athlon X2 / 64. Everything went fine, I rebooted, the graphical login screen appeared, so I thought I will be able at last to run Debian on a computer ...
But then after login, the login Window disappeared, the "Debian" logo too, and... that's all folks! A nice blank screen. But the mouse is still perfectly drawn, so it's kind of weird.
Here's what tells me "uname -a" :
Linux olivierdebian 2.6.26-2-amd64 #1 SMP Sun Nov 21 09:17:22 UTC 2010 x86_64 GNU/Linux
If I go to CTRL-ALT-F1, i login as root and I do a "/etc/init.d/gdm restart", I have the login screen back and this is once again the same scenario: login => ok => blank screen with mouse properly drawn and the Debian background color still there.
View 2 Replies
View Related
Feb 24, 2011
I've now tried several times to install a fresh copy Fedora 13 i386 on my old Dell laptop, but each time I reboot the laptop I get the first-time welcome screen which asks you to create a user. When I re-enter my user info, it tells me that there's already a folder created for that user. After rebooting, I'm back to that screen. Does anyone know what's going on here?
View 2 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 16 Replies
View Related
May 28, 2011
i always had problem with my ATI card and Gnome GUI i decided to install Debian without any GUI at all. After login in CLI i used those commands:"apt-get update""apt-get install alsa-base xorg kdm kde gtl-qt-engine" .I decided to manually install KDE because i had no problem with it in Open SUSE. After that I restarted my pc and got flickering login screen, I'm unable to swith to console becasue after hitting ctrl-alt-F1 I'm getting black screen. I searched google but with no luck, and if there was some solution it required you to be logged in into GUI.
View 14 Replies
View Related
Jul 7, 2011
I have a problem with the screen flickering on fedora 15 (and lots of other modern distros, eg: ubuntu 10.10 and 11.04 and opensuse 11.4) i think it is something to do with xorg.conf as older linux distros work fine
so i added one using
Code:
Xorg :1 -configure
cp /root/xorg.conf.new /etc/X11/xorg.conf
but i still have a slight flicker. my monitor takes an input at 50-60Hz how do i set that up in the config file or is that not what is causing that? and can somebody recommend me a nice icon set for fedora
I need to add this somewhere Code: ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync in the xorg.conf no idea where!
View 3 Replies
View Related
Mar 10, 2010
so i have been trying to install ubuntu for quite some time now and i have run into a bit of a roadblock.
I have tried to install 9.10 and it installs just fine (the GUI works just fine and everything seemingly goes ok), however when i go to boot it, i get to a flickering screen asking for my username and password (this is not the gnome login screen, it is just a blank black prompt asking for me to login). however, the flickering is inhibiting me from easily entering anything in from my keyboard. Thus, i cannot log in to fix the problem (i cannot enter my password because i dont know if the keys i am entering are being accepted or not). and recovery mode does the same thing.
This happens if i try installing it straight up, or if i install it inside windows. I have tried all kinds of boot options and install options (all that acpi crap) but none of it works.
i even tried installing some of my old copies of ubuntu (8.04), but when i do that the grub cannot load the linux kernel. I have also tried both the 64-bit and the 32-bit versions to no avail.
I am running an ASUS motherboard, AMD quad core x64, dual Nvidia geforce 8600's, 6 gigs of ram, and PLENTY of hard disk space.
I am not a noob to linux at all, but i have never encountered a problem like this and i have no clue how to fix it. Hell, i dont even know how to go about fixing it without logging in.
View 4 Replies
View Related
Oct 18, 2010
I've put a new hdd into my old comp to try it out, I am using a usb to try and install. When I install I get writing scrolling down the screen then it flicks to a black screen and just stays there. Am i doing it wrong?
View 2 Replies
View Related
