Ubuntu :: Flash Local Storage Is Currently Disabled
Jun 26, 2010
After installing the latest updates to 10.04 (there were many, so I don't know root cause) Flash didn't work properly. I'm running Adobe flash 10.1r53, 2.6.32-22-generic kernel, Chrome5.0.375.86, Firefox3.6.3
Pandora complained "Flash Local Storage is Currently Disabled". When I went to Adobe Flash Player Settings Manager Global Security Settings Panel, it wouldn't allow me to click the box to "Allow third-party Flash content to store data on your computer". It was unclickable. I also received the Google Chrome error "Your Permissions Can Not Be Read".
[URL]
The fix to Flash isn't much different. Perform this command & it should fix it for Google Chrome and Firefox.
sudo chown user:user/home/user/.macromedia/Flash_Player#SharedObjects
Somehow all these directories had its ownership changed to root.
View 3 Replies
ADVERTISEMENT
Aug 17, 2010
I have this unique situation, I think. My TV plays certain files only through external USB storage. My Ubuntu server stores all of these files on local hard disks. I do not want to buy an external hard disk and then keep moving it between both. Now, strange as it may sound, is it possible to somehow connect my server to the PC and expose a given local hard disk connected to the server, as an external USB drive to the TV?
View 1 Replies
View Related
Jul 20, 2010
I have about 50 servers with at least 200 GB free on each host. I need close to 10 TB of continuous shared storage between almost half of the servers for a new app I building.
I was looking into buying a storage device but was wonder if I could get any use out of the free space on all the servers, grouping all of the free storage from the hosts into one reduduant storage array.
View 1 Replies
View Related
Jan 4, 2010
I am running Karmic on a stripped laptop, and running it off a usb thumbdrive.Its purpose is mainly as a slide show/video show inset in a tableI did not really want to go out and buy a HDD, since it does not need to store that much. Then I went to aldi and they had 8gb flash drives for $5, so I got 6. The ultimate question comes down to the best way to make use of them. I ordered a 7 slot USB hum off ebay for cheap, and I was going to go from there. would it be easier/better to just plug them in and make links to them from the normal folders and just operate directly from there, or is there a better option. I guess a usb raid array could be neat
View 4 Replies
View Related
Dec 11, 2010
My netbook book is new 3 weeks, so should support 2.0.I have just bought a new flash drive 4GB. It seems very slow when copying data.I have done the following using lsusb:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub[code]....
But doesn't give me any details of my actual flash drive that I have bought.
View 1 Replies
View Related
Mar 10, 2010
The issue I've been having is with Flash on websites; most notably, Livestream's Flash-based browser viewer, and Adult Swim's flash-based games. Clicking works perfectly fine, but the keyboard input is entirely disabled for the Flash area. Text boxes, or game controls, won't respond at all, even when everything else is still working.The only way to input any text into Flash-based text boxes is to write it somewhere else (Firefox's URL or Search bar, or in GEDIT), then copy+paste into the tect box (again, Ctrl+V won't work, only right-clicking and pasting will go through).
I've tried multiple versions of the Adobe Flash player, including the installer directly from Adobe's site, the adobe-flashplugin package in Synaptic, the flashplugin-installer package, and I believe I tried GNASH as well (although I'm not sure if that did anything).I haven't had a chance to attempt to downgrade either one yet, however, nor have I been able to test another browser.I've seen a few other issues of this sort pop up here before, but they've all either gotten no solutions, or they're a year or two old, or they're running into 64-bit-specific issues. Hopefully this is posted in the correct location, and fingers crossed someone has an answer (or better yet, a solution).
View 2 Replies
View Related
Oct 9, 2009
Decided that my internal RealTek HDA was pretty meh. I'm now using an SoundBlaster USB external. After disabling the internal sound device in System > Preference > Sound ...everything works perfectly through the external device, except Firefox, no sound at all... not even with Flash...
View 5 Replies
View Related
May 23, 2010
ever since i updated to firefox 3.6.3 on my opensuse 11.0, it has been crashing instantly on loading videos and gmail.
i have done all of the obvious things. run in safe mode, uninstalled and reinstalled including deleting the entire profile, reinstalling the flash player and adobe reader plugins, disabling all extensions (in fact, i have no extensions installed at all now) - nothing works!
i have put a request in to the mozilla forums, but nobody has an answer.
i am able to get firefox to load the videos page only when in safe mode and with the shockwave flash plugin disabled. it still crashes instantly on gmail.
when i go into the yast installer to look for older firefox versions that i might downgrade to, the versions list is in such tiny type that it is unreadable. every other font is fine except that one versions list! it's driving me mad that the one thing i need to see in order to get a working firefox is invisible to me due to some obscure bug.
View 9 Replies
View Related
Mar 11, 2011
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
View 4 Replies
View Related
Feb 20, 2011
I like Chrome and Chromium seems really nice on ubuntu. In Preferences -> Under the Hood -> Content Settings -> Javascript, I have selected no javascript. I then go to Exceptions to enter file:///* or similar but the input control doesn't accept this. It seems to want to a domain name and doesn't like forward slashes.
I've looked in the Preferences file but after adding a dummy exception I see no details of that exception. Anyone know where these exceptions are so I can try to manually edit?
View 4 Replies
View Related
Sep 5, 2010
I am trying to enable local storage with adobe flash on fedora 13. I go to the global settings web page, but it will not let me check the box to enable local storage.I am trying to get this to work with Pandora Radio.I also installed Adobe Air, but it will not let me install the pandora one desktop.
View 3 Replies
View Related
Jul 27, 2011
In [URL] I can right-click on a flash video and have the option to access "local settings" under "Settings" to specify configuration for webcam, mic, etc. But in Facebook I need to adjust a setting and the "Setting" option for local config is gray-ed out, I can't access it.
I'm running OpenSUSE 11.4, and I've seen this in GNOME and KDE within Firefox.
View 3 Replies
View Related
Jun 8, 2010
I am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
View 3 Replies
View Related
Jul 26, 2011
I have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
View 2 Replies
View Related
May 16, 2010
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies
View Related
Jun 28, 2011
I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies
View Related
Dec 9, 2010
One of Konqueror's unique features is that i can name a local process as the action in a form. When i submit that form, the local process is executed. Very helpful for certain offline tasks. What would make it even better is if i could find a way to pass some data to that local process from the html page. This could be the content of a hidden input item, etc. Alternatively, if there is a way for Konqueror to create or update a local file with data from the html page, that would acheive the same end.
View 1 Replies
View Related
Sep 27, 2010
What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies
View Related
Dec 9, 2009
I am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
View 4 Replies
View Related
May 25, 2010
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
View 6 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Oct 23, 2010
i'm in 64 bit kubuntu, with the the nswrapper in 10.10http://www.metacafe.comin firefox i get the sound but not the video in metacafe, when the video is unblocked by flash block. Others have the same problem?
View 4 Replies
View Related
Oct 2, 2010
I get this link [url] for change my version of flash, because I can't playing flash when I have turned on effects. So I downloaded file for my Ubuntu 10.04 64-bit and I extracted it. But there is problem, because I don't know on which location I need to copy .so file?
View 2 Replies
View Related
Sep 26, 2010
I recently installed Ubuntu 10.10 AMD64 beta. After installing the flash player, everything worked fine. I installed a few updates, as well as Ubuntu Stuido from the synaptic package manager, and when I rebooted, I can't hear any sound from flash content displayed in Fire Fox. All other sounds work fine, and I made another user account as a test, and that account has full audio functionality, including flash...
View 5 Replies
View Related
May 19, 2011
Flash is no longer working in Mozilla Firefox after the most recent flash plugin update. I couldn't find any information on it.
View 9 Replies
View Related
Dec 20, 2010
i downloaded adobe flash player multiple times but flash movies still not working what do
View 1 Replies
View Related
Jan 8, 2010
What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com
hi there
[CONTROL-D]
[code]...
View 3 Replies
View Related
Jun 26, 2010
Flash was updated two days ago on my system:
Since then, I have been unable to get any sound out of flash. All other sound sources work fine.
View 9 Replies
View Related
Oct 3, 2010
I installed Boxee on my 64bit install. I had to edit the DEB so it did not install Flash, because Ubuntu still insists on installing the 32bit version which always borks Firefox.
But now I cant run synaptic without getting complaints of broken packages. I just want to blacklist boxee from from annoying the hell out of me, but keep it installed. How do I go about doing that?
View 3 Replies
View Related
Dec 13, 2008
I'm trying to load the flash stuff in webpages, but it says i need the flash plugin.
I download the YUM rpm installer, and use yum localinstall to do it.
Terminal say: /home/wade/Download/adobe-release-i386-1.0-1.noarch.rpm: does not update installed package.
I have already tried installing it, and it says it worked fine, but I'm still unable to view flash.
View 8 Replies
View Related
