have an error when I try downloading the Game Engine Panada3D in Gdebi Packaged Installer! There error is" Error: Dependency is not satisfiable: libavutil49 (>= 3:0.svn20090303-1)|libavutil-extra-49 (>= 3:0.svn20090303-1)"
View 1 RepliesI'm trying to install a program, and am getting the following error:
Error: Dependency is not satisfiable: libswt-gtk-3.3-java|libswt3.2-gtk-java
How do I "satisfy" the dependency?
[URL].. when i try to install the .deb (cndrvcups-capt_1.90-1_i386.deb) i get Error: Dependency is not satisfiable: libstdc++5 i guess because we are now on ++6 how do i tell the install that, i looked in the control part of the .deb and can see where it is set but don't know how to change it and then build the .deb again (plus i don't know of that would work) or is there a way to fool the package into thinking ++5 is still installed?
View 2 Replies View RelatedI try to install ultamatix on my ubuntu 10.04 system and i come up with the same error every time:
Error: Dependency is not satisfiable: python2.5
what do i do to successfully use ultamatix
im using Ubuntu 8.04
Error: Dependency is not satisfiable libqt4-xml
After a re-install, I tried adding Ubuntu-Tweak, only to have this message come up, in red, in the dialog box: Error: Dependency is not satisfiable: gconf2 (>= 2.28.1-2)
What does this mean, and how do you circumvent it? Edited to add: I tried installing it using the GDebi installer.
I would like to install wxCam in Ubuntu 10.04 and I have downloaded the file wxcam_1.0.7_i386.deb
Then I have installed with Synaptic Package Manager the following packages:
llbwxbase2.8-0
libwxbase2.8-dev
libwxgtk2.8-0
libwxgtk2.8-dev
libxvidcore4
libxvidcore-dev
Next step is double click on wxcam_1.0.7_i386.deb
And I obtained the following error: Error: Dependency is not satisfiable: libwxbase2.8-0 (>=2.8.11.0)
Synaptic Package Manager shows me that the latest version is 2.8.10.1-oubuntu1.2. So what means (>=2.8.11.0) ?
When I remove the packages �libwxbase�, then again I have the same error.
What is the right procedure to install wxCam?
When opening the Skype .deb with package installer, I get:Quote: Error: Dependency is not satisfiable: libqt4-dbus (>= 4.4.3) A quick repo search told me that it isn't in the repos.How can I install this?
View 3 Replies View RelatedI've just installed ubuntu and wanted to give it a go. However trying to download and installing my favorite browser I get an error: Error: Dependency is not satisfiable: libqt3-mt (>= 3.3.4) im downloading the default package, and ran the package install thingy. I googled around trying to find a solution, but I found mostly for older versions of ubuntu and dont know if they apply to my problem. I also tried some tips I found running a command with something like sudo apt-get install libqt3-mt. then i end up with this response:
E: Couldn't find package libqt3-mt
I am very new to Ubuntu. I have installed Ubuntu 9.10 yesterday from downloading file from Website on my Acer Laptop. I want to install Virtual box and run Win XP to run some of the windows based programs. I downloaded deb file from virtualbox website for Ubuntu 9.10 and double clicked that file. The installer in Ubuntu immediately gave the following error.
Error: Dependency is not satisfiable: libqt4-network (>= 4.5.1)
I re-downloaded the file. But again same problem. I am not able to figure out what is wrong. I have got the latest update of Ubuntu running as I run the update after the the installation.
I just downloaded Wally and was trying to install it but got this error
Code:
Error: Dependency is not satisfiable: libqt4-network (>= 4.5.1)
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI've just bought a new laptop (Acer 3810T - which has a "Core 2 Solo Processor) - so I have installed Linux for the first time in my life.... Ubuntu 9.10-desktop-amd64.iso - so far so good, I'm very very impressed and the operating system seems to be working fine. I assume that I have chosen correctly the AMD64 version then.
Fastforward to Skype installation, and I download the version (skype-ubuntu-intrepid_2.1.0.81-1_amd64.deb) - which is the best match as far as I can tell from Skype's website. However when I come to install it, I get the follwoing error: Error: Dependency is not satisfiable: lib32stdc++6 (>= 4.1.1-21)
I'm trying to run Processing with this instructions but when I try to install Jikes I get a dependencies error: HTML Code: Error: Dependency is not satisfiable: j2re1.3|j2sdk1.3|j2re1.4|sun-j2re1.4|sun-j2re1.5|sun-j2sdk1.5 I have Java6 jdk and Java6 jdr installed, what should I do????
View 2 Replies View RelatedWhile trying to install the amazon mp3 downloader I got this package installer message : "Error: Dependency is not satisfiable: libboost-filesystem1.34.1" Amazons ubuntu version of this downloader is for the 9.04 version and not the10,04 LTS which I am using.
View 9 Replies View RelatedI am trying to install gloobus, but when I open deb package it says Error: Dependency is not satisfiable.
View 1 Replies View RelatedIf i try whatewer .deb file to install on ubuntu 8, or on ubuntu studio 9, i got this message- depedency is not..
View 9 Replies View RelatedI have 2 questions, First when I try installing some apps from the software manager I get :
Dependency is not satisfiable: libqt4-network (>= 4:4.5.3)
Secondly for some of the applications they require different sources (universe, main etc.) but when I try installing these sources it tells me to put in the maverick meerkat cd rom, I dl the virtual cd and I have the .iso can I use that for the source? Is there a virtual drive program I can use?
I am using Ubuntu Hardy. I tried to install Skype and it showed this error message "Skype dependency is not satisfiable libasound2". Then I check the synaptic manager it shows that the libasound2 is already installed. Then I reinstalled the libasound2 using terminal. But the error is still showing. On googleing I found in most of the forums the solution was to upgrade from edgy to feisty so it was no use to me.
View 1 Replies View RelatedWhen installing Rstudio from: [URL] .... in Debian stretch I get the following:
Code: Select allDependency is not satisfiable: libgstreamer0.10-0
Dependency is not satisfiable: libgstreamer-plugins-base0.10-0
seems like there's only libgstreamer1.0-0 available in stretch. In sid it's included though: [URL] ....
For the time being I installed the sid versions but wonder what's a proper solution.
I have replaced Ubuntu 8.04 with a clean install of 9.10 In 8.04 I used to be able to print to my Canon Pixma ip1500 using the resources at [URL] In 9.10 I can no longer get my Canon Pixma ip1500 printer to work because on the one hand: Open pstocanonbj_3.3-1.1_i386.deb with GDebi Package Installer
Code:
Error: Dependency is not satisfiable: libcupsys2-gnutls10 (>= 1.1.23-1) and on the other hand:
In http://packages.debian.org/etch/libcupsys2
download libcupsys2-gnutls10
"Download Page for libcupsys2_1.2.7-4+etch9_i386.deb on Intel x86 machines"
Open with GDebi
Code:
Error: Breaks exisiting package 'libcups2' conflict: libcupsys2 (< 1.3.7-6)
I downloaded the latest version of Tellico as a .deb file directly from the Tellico website,since the version available in the repositories no longer works with Amazon. This new version has been available at the web site since November,but has yet to be updated on the Ubuntu sites.Anyway,I tried to install it by double-clicking it in Nautilus. That brought up Package Manager which says that it cannot be installed - "Error: Dependency is not satisfiable". Is there anyway to force either Package Manager or aptitude ot dpkg to install the package along with any dependencies that are required?
View 2 Replies View RelatedI tried to compile it but it seems to have one extra dependency after the other that needs to be compiled. I'm assuming that it should work since Google Chrome works for Lenny (apparently). Will it be added to backports eventually or anything of the sort?
View 3 Replies View RelatedI have an old version of skype running.
I downloaded the latest version for my ubuntu installation.
skype-ubuntu-intrepid_2.1.0.81-1_i386.deb
On running Gdebi package installer i get the following message:
Error: Dependancy is not satisfiable : libasound2
Ichecked and libasound 2 is installed and i re-installed it from synaptic manager.
i need to install nagios-plugins 64 bit, when i tried to install via yum i got this error yum install nagios-plugins.x86_64 yum error Unsatisfied dependency i hv installed openssl 32 bit but it needs openssl 64 bit, even php and perl. i tried to to install via yum yum install openssl.x84_64 but its not getting installed i tried to uninstall openssl but its shows so many packages to remove
View 4 Replies View Relatedthere are 2 related to 11.3: openSUSE_11.3/ and openSUSE_11.3_KDE_Distro_Factory/ Index of /repositories/KDE:/Extra they are not listed as official kde4 repos here KDE repositories - openSUSE, but they are in the same directory structure on the build service so it would assume they are official (what ever official means) They have rpm's I didn't see in community and playground (at least for 11.3) such as audex and clementine I would guess that they are for the stable and factory versions of KDE4 but then shouldn't there be a 3rd for unstable if this was the case? Or do they refer to the distro, 11.3 stable and 11.3 factory
View 6 Replies View Relatedsed '/
$/ {N s/
//}'
sed: -e expression #1, char 10: extra characters after command
I want to understand what is wrong with my command line. When I can do the some of following in a script but not in a command line. I have been working through the tutorial at [URL]. When I got stuck at the section Working with Multiple Lines. These script works fine.
#!/bin/sh
sed '
# look for a "#" at the end of the line
/#$/ {
# Found one - now read in the next line
N
# delete the "#" and the new line character,
s/#
//
}' file
In my case I am looking for or return ^M.
#!/bin/sh
sed '
# look for a "#" at the end of the line
/
$/ {
# Found one - now read in the next line
N
# delete the "#" and the new line character,
s/
//
}' file
The problem is when I try to convert it to a single line shell command it gives me an errors.
sed '/
$/ {N s/
//}'
sed: -e expression #1, char 10: extra characters after command
sed '/
$/{N s/
//}'
sed: -e expression #1, char 9: extra characters after command
sed '/
$/{Ns/
//}'
sed: -e expression #1, char 8: extra characters after command
I want to understand what is wrong with my command line. When I can do the following in a script but not in a command line. I have created a sed script to do the work I want.
cat test.sed
#!/bin/sed -f
/
$/ {
N
s/
//
}
When I try to install mangler.DEB I get an error Error: Dependency is not satisfiable: libasound2(>> 1.0.22)It said to install older versions and when I do it doesnt even show up in internet or anywhere.
View 3 Replies View RelatedI am trying to install VMware 2.5 and when I run the rpm i receive the error: error: Failed Dependencies: /bin/sh is needed by VMware-Player-2.5.3-185404.i386
How can make this dependency? I have already tried linking it and I even tried using the rpm in the /bin directory, where /bin/sh is located.
I am new to Red Hat. I have problem with yum missing dependency error when I tried to update or install rpm.
Below are short sample of it:
Error:
I tried to find the solution in internets and forums,such as yum clear all, but nothing works.
Here are the results of my repolist: