How to open port for transmission or deluge to use torrents, 'cause any of both programs can download any torrent. I've searched on the internet and only find about open ports on hardware router, and that's weird 'cause Deluge on windows works perfect just after installing it and there's no need to open any port on hardware router.
View 1 RepliesI've just setup a virtual Ubuntu 10.10 machine on my server running Deluge and WebUI. The WebUI seems to work fine, but if I upload a torrent with a total size over 2Gb I just get an 'error' as soon as the torrent is run.The download folder is a CIFS share to a NAS (Acer Altos EasyStore) folder, I can download torrents that are less than 2Gb in total without any problems.I can read/write large files from the command line or Nautilus but any torrent uploaded to Deluge larger than 2Gb is flagged as 'error' as soon as it is run (with no actual error listed in the torrent details).
View 1 Replies View Relatedmy torrents upload fine when they are peers, but as soon as they finish and become seed's they stop working. they haven't uploaded a single time since becoming seeds.
View 6 Replies View RelatedTransmission says my port is closed. If I google the problem, it just gives me advice on how to open a port in Windows OS. There's no firewall in Ubuntu 10.10 by default, right? There isn't any router used neither. I'm living in a dorm. I just plug the LAN cable in the box fixed to the wall.
View 3 Replies View RelatedI'm trying to set up the following "server" system. (I say "server" because I'm really running ubuntu-desktop 10.04 LTS):
I have set up Samba and allowed guest access to my /media/Share/data using Windows 7. Everything works great, I can create folders, add files, etc. However I noticed that when I add files or folders via my mapped drive in Windows 7, it defaults to permissions that do not allow Deluge to access them. I realized that if I go back to the server and give it
Code:
sudo chmod 0777 /media/Share/data/(folder or file)
Deluge can now access the files. I don't want to have to modify permissions every time I add a new torrent to Deluge's watch folder which is /media/Share/data/Torrents.
How do I configure Samba (or linux, or windows) to give rwx permissions when I add a file or torrent via windows? And vice versa, if deluge downloads a file and moves it to completed downloads (which I haven't been able to get this far yet) will I be able to access it via Windows 7?
I recently started using Transmission torrent client. I love it! The light weight and web interface feature is compelling. I am not able to figure out how to queue torrents.
View 3 Replies View RelatedAny option?Only thing i saw for shutdown for Transmission, was for Mac, none for Linux.
View 1 Replies View RelatedI usually add torrents to transmission through my iPhone. I have Transmission watch the 'Attachments' folder in my Dropbox. I also have Transmission auto add the torrent and delete the torrent file when done. Thing is if I don't have Transmission running when I add the torrent to my dropbox folder. Transmission doesn't start up to download the torrent. Is there a script that can watch for torrent files in my Dropbox folder that I can run in Scheduled Tasks to run every 5 min or so. Also when I have it up and running and I do have auto add on. It auto adds it to transmission but then the popup dialog appears to ask if I just want to download one of the files from the torrent or all 10. Is there a way to bypass this?
View 1 Replies View RelatedI run two machines and both are running Transmission to download/upload torrents. I am selling one of them but not all the torrents will have the time to finish downloading before the buyer picks up the machine. How can I transfer my partially downloaded torrents from one machine to the other? I have an external drive but I don't know how to do this.
View 1 Replies View RelatedI'm trying to set up Transmission/Deluge to do RSS feed downloading. I've got the clients working when I drop a torrent into the folder just fine, but FlexGet is giving me some trouble. I'm using feeds from EZTV & EZRSS to get the torrents for a show. I've used the feeds for months for uTorrent in Windows, so I know they're good. Below is my ~/.flexget/config.yml file.
Code:
feeds:
The Daily Show:
rss: 'https://www.ezrss.it/search/index.php?show_name=The+Daily+Show&date=&quality=&release_group=&mode=rss'
series:
- The Daily Show
[Code]...
Error) download download Failed The Daily Show 2011-01-17 [HDTV - FQM] (URL Error) This happens for every torrent in the feed. I think it has something to do with it substituting %28 for [, %29 for ], and so on, but I'm not sure how to fix it (or if it's actually the problem).
Transmission has started giving me errors when I download a new torrent file. It has stopped being able to create the new file (ie touch) to begin the download. Error: Permission denied (/path/to/specific/file/in/new.torrent) Old torrents are still running to the same drive location. No permissions have changed.
View 9 Replies View RelatedI've had Debian on my laptop for around 4 months which I rarely use. I'm using Squeeze since it seems to be the only release that will work with my ethernet card.The internet had been working fine for a couple of months but broke when I tried to allow port forwarding for torrents. I could only connect to the internet after this by using:
iptables -F
iptables -X
iptables -t nat -F
[code]....
i download a lot of movies and i use *******.com and ********.com. i want to port forward my transmission, how do i do that?
View 1 Replies View RelatedI was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View RelatedI am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedWhile I have Transmission running, whether it be up/downloading or just open with one thing unpaused and no activity, all other computer functions that need internet access are unusable. Transmission says my port is closed in its preferences.
1. How do I find and open port?
2. Will finding an open port solve the problem of all things internet not working while Transmission is?
3. Do I need to create a static ip in order to forward a port through my router?
4. Will creating a static ip and forwarding that port solve my problem of only being able to use the internet while Transmission is on?
I am trying to configure Bittorando and iptables using Firestarter. I have got it working but am concerned about security holes.
Let me explain.
AIUI, the Bittornado program contacts the "tracker" on various ports which (from the previously blocked connections in Firestarter) ranged from 4664 to 65532. Therefore, currently I have set this range to be open to allow downloads of the torrent.
However, this seems, IMHO, to devalue to point of having a restrictive exit policy for Firestarter since now virtually all ports are open. I can see nothing on the Bittornado client to restrict the outgoing ports although the "listening" (incoming) ports can be restricted.
I would prefer to have my system locked-down so that the minimal number of ports are open to initiate external connections so is there any way to achieve this with Bittornado?
I have just set up the transmission bittorrent client on my server (using the web interface), and am trying to get the port forwarding right. After noticing low download speeds (and rare uploading), I decided to check if a port needed to be forwarded.
I found many conflicting sites, mentioning both the ranges 6881-6999 and the port 51413 (as well as TCP and UDP versus just TCP). My current configuration is to forward TCP and UDP port 51413 to my server.
When I try to open Transmission I get a message: "Couldn't open "/home/shai/.config/transmission/lock": Permission denied", and the only way to open it is by using gksudo.
I read on another thread that I need to delete that file, but the file doesn't exist.
What should I do?
When I go to Places -> Connect to server, or right-click Open Containing Folder in Firefox or Transmission, or pretty much anything that is suppose to open a folder - instead it opens Music Player.
View 4 Replies View RelatedIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI can only access the Transmission web interface while the Transmission-gtk client is running. When I close it, the web interface is no longer available. I try to manually start the transmission-daemon, but the process never shows up as running.
View 2 Replies View RelatedI have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
I open the ports in graphical mode.
installed for slack 13.0 on my machine. I type transmission from the command line and get "Cannot open display:".No dependancies except this line:Quote:Dependencies: libevent (available at SlackBuilds.org) is required,but transmission will use a built-in libevent if you don't haveit installed already.so i didnt bother getting it.Any ideas anyone? Maybe there are dependancies but not listed on that site? Or something to make the gui side of it work?
View 3 Replies View RelatedI just installed apache. I didn't change the configuration files at all except add Quote: # added servername to avoid the could not determine fqdn error ServerName myname.homelinux.org to apache2.conf. Apache is working locally (I get the `it's working' screen at [URL]). However, I cannot access my computer from an external computer by going to [URL], which is equivalent to [URL] -- [IP address changed slightly for privacy] Here is a screenshot to my router settings. I disabled the filter for port 80 on the router. here shouldn't be a firewall, unless it's automatically installed with ubuntu 10.4. (sudo ufw status says `inactive'.)
I checked my ports from [URL] and indeed port 22 is open (ssh-ing into my computer externally is not a problem), whereas port 80 is closed. What step in opening up port 80 am I missing? (I also made sure my ISP isn't blocking port 80.)
I am trying to access my desktop remotely via VNC. I can already access my computer using ssh, and I managed to open port 22 on my router:
Now I must open port 5900 for VNC, and I think I did exactly the same thing:
Using [url](a port check service), however, my port 22 is OPEN and my port 5900 is CLOSED. Yes, I restarted my router after making the changes.
I can seem to open port 25565 for a java application (executable jar)
I'm running ubuntu server 9 thoroughly up to date code...
Yet connections to port 25565 fail when I have the firewall enabled (sudo ufw enable)
For example canyouseeme.org says "Error: I could not see your service on port (25565) Reason: Connection timed out"
And connections to port 25565 _DO WORK_ when I disable the firewall (sudo ufw disable)
canyouseeme.org says "Success: I can see your service on port (25565)"
I heard when running Ubuntu I need to set it to open with one port. I had a friend ran Ubuntu on his laptop at school and had other Ubuntu users at school got access to his computer, is that possible?
View 2 Replies View Relatedneeding to open a port in ubuntu, then use it for my VirtualBox Pc.My VirtualBox is running - Windows XP I have a router connected to my network - Linksys WRT54G Now lets begin, I have tried opening via there router homepage. But when I go to [URL] and test port 4900 is still says that it is closed.
View 3 Replies View Related