I have installed Debian 504 on an old Toshiba Satellite laptop with 192mb of memory. Install is fine, boots up etc ok.The screen resolution is limited to 800 x 600 (not filling the whole screen)"Screen Resolution Properties" shows 640 x 480 and 800 x 600 as the only 2 options.How can I get a bigger resolution please?
View 1 RepliesI am getting a screen resolution of 1280x1024 on my laptop, but I sometimes like the lower resolutions, which are unaccessible via the Screen Resolution program.
View 2 Replies View RelatedI just installed the latest version of Ubuntu on my Toshiba Sattelite A25-207 laptop. I totally erased my previous Windows XP OS and everything else. Everything is great, execept the screen resolution. The resolution is set at 800 x 600 and I know that my screen can handle bigger. How do I change this?
I am totally new to Ubuntu and I have no idea how to play with code.
Well, this has happened numerous times before when I had other distros, Ubuntu, Mint,and even Fedora, and then it didn't bother me because I had a GUI and a Desktop Manager, but now it's become a bit of a problem. I can read it okay, but I'd like to have it full resolution again. I'll post a link below
[URL]
Not easy to see what I typed, but I've tried adding "vga=773" to my kernel line but it didn't help. What do I do? *I hope I'm not being incoherent*
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies View RelatedI have a fresh install of debian on an older laptop. The screen resolution is 800 x 600, but I want it to be 1024 x768. I know this screen can handle this resolution because I've used it before. I tampered with xorg.conf according to this link, viewtopic.php?t=26577, but to no avail. Here is my xorg.conf
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc104"
Option"XkbLayout""us"
[Code]...
One day when i logged in, my screen resolution became lower. The sistem do not recognize anymore my old resolution (native) 1600x900 . And you can realize that maybe there are problems with the video card, because the system is slower than before in this terms. What could have happened?
View 4 Replies View RelatedEver since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
I've been googling around for a while now and have been unsuccessful in setting up the screen resolution up properly... I have the manual for my monitor in case you ask for any of the specs. Other than unsuccessfully changing the xorg file, I've successfully went through the steps on Debians wiki site for NvidiaGraphicsDrivers in order to get my 9800gt working. I want to get the resolution upto 1400x900, but in the "Screen Resolution" window I only have the option for 640x480,50Hz
[Code]...
I am on a Debian 5 server and there is no desktop environment installed.I use mysql client on localhost and it's very hard to read tables with the lowest screen resolution.Is there a way to change it? I saw a few times, BACKTRACK changes command line's screen resolution but I don't know how to it or is it possible on debian.
View 7 Replies View RelatedI just installed debian lenny KDE 5.5, when installing the screen was busy at 100% but when I first loggin in, at least I Had 75% of screen resolution. less than 102x768. What can I do? this new serie resoletion screen but the system allows me to be in graphical mode. To be clear, the system gives me at least 800x400. i'm using Toshiba Tecra M1 with a standard vga graphic adapter
View 18 Replies View RelatedI'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
View 5 Replies View RelatedI just changed the desktop on my thinkpad from awesome to i3. And now I have some very strange issues with the screen resolution. Because at home I use this x60 thinkpad on a dockingstation and a 19" display. As long as I used Awesome as my Desktop, the display manager as well as the desktop itself could handle the different screen resolution depending on if I'm out with just my 12" on my thinkpad or with the much bigger screen on my home 19" display.
I can understand that i3 maybe cannot handle this alone and I need xrandx to enforce the screen resolution. But why is the display manager (lightdm) also affected by this change? What is so different that even the DM cannot find the proper screen resolution?
I'm running debian lenny and want to change the screen resolution from 640x480 to 1024x768. I'm using a nVidia Geforce FX 5800 and I installed the additional nvidia drivers with the help of this tutorial [URL]. Here is my xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection .....
When I try to change the screen resolution via the gnome menu I just can choose the 640x480 resolution and 50Hz refresh rate.
I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[Code].....
I have installed Debian 5.0.4 on my Toshiba laptop and I can not set screen resolution to 1280x800. I had Ubuntu and openSuse previsoly installed on Toshiba and had no problems with setting screen resolution. My /etc/X11/xorg.cong looks:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc105"
Option"XkbLayout""hr"
[Code]....
What I need to edit to this file to solve problem? Do I have to install additional software?
I installed wheezy on a new pc, and I have only two resolution modes:
1024X768
800x600
what do I have to do to get hight resolution?
lspci:
root@debian ~ # lspci -v -s `lspci | awk '/VGA/{print $1}'`
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device 11d7
Flags: bus master, fast devsel, latency 0, IRQ 44
[Code] .....
I am not use X11 in linux. I use just terminal window. How can i change screen resolution?
View 5 Replies View RelatedNow that I'm more lucid I can adjust the format a bit. If I try opening the TTY the screen goes completely black after visualizing few artifact on the bottom of the screen.
Pressing Ctrl+Alt+F7 brings me back safely to the GUI
So far I tried to modify the /etc/defaults/grub file to uncomment the grub resolution and the grub_terminal to no avail. Now at least it seams to waste some less time to load the grub (it took something like 15 sec before) but it lost the previous green/torquoise background and now it's white char on black background.
On a side note pressing C on the grub to reach the grub console gave me some answer I don't know how to deal with... I was trying to use vbeinfo but it didn't found the command and so I tried the insmod:
Photo(large) of the complete grub console session wrote:grub>
grub> videoinfo
List of supported video modes:
Legend: mask/position=red/green/blue/reserved
grub> videotest
error: no suitable video mode found.
grub> insmod vbe
error: file `/boot/grub/x86_64-efi/vbe.mod' not found
I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.
View 7 Replies View RelatedI have been using Debian for 3 or 4 years, I have never used LXDE before. After several attempts and searches through google, I succeeded to change the screen resolution to 1024x768 but LXDE is retaining this resolution for only one session: I have to change the resolution every time I use LXDE.
This is what I have in ~/.config
edbarx@edbarx-pc:~/.config$ ls -l
total 72
drwxr-xr-x 2 edbarx edbarx 4096 Mar 19 14:41 akonadi
[code]....
How to enable native screen resolution in X using VESA driver? I have IBM/Lenovo ThinkPad T61 with a native screen resolution of 1680x1050, but I am getting 1024x768 instead.
This is a fresh install of Debian 8.3 (latest stable) (Jessie).
The root cause of this is that nouveau graphics driver (which I was using before) was causing me kernel crashes. Full story here: [URL] .....
I'm a newbe to Debian & Linux but I am trying to get a base system installed on a small touchscreen computer without the Gnome environment. I am using Debian 5 but the resolution of the screen has not configured correctly with the command line screen appearing offset to the right.
View 7 Replies View RelatedWhen Debian 6 (amd 64, testing) is loaded, before desktop appears, for a while, the screen is black and three strange green rows appear. Then, all is ok and I can see a normale desktop and start to use Debian. So, an error in video config could be possible. Linked to this fact (I think) , there is the impossibility to modify the resolution screen (that is fixed to 1024x768) and the refresh frequency. I've tried to find "xorg.conf" in order to modify it like various guides suggest me, but this file is not present.
View 1 Replies View RelatedThe login screen is always at maximum screen resolution, how can i change this?
View 2 Replies View RelatedI have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I am wanting to try to change my normal user (bbq) to a different screen size within my secondary user (lfs). I was wondering how one would do that.
This happened when OpenClonk changed my screen resolution and when i changed it back my screen blacked out (and me being the idiot save it).
Debian 8 GNOME
Also (a bit unrelated) could a video card problem cause a user to log out? I have been having some severe problems with my monitor and I am thinking it is th video card. Sometimes when I am starting a program my monitor will lose connection to my computer (HDMI signal not found) and I will either have to wait a few seconds and it will turn on or it will just stay blacked out.
I am running Debian on a g3 mac and when I set the screen resolution to 1024 by 768 I cannot see everything, for instance the scroll bar on iceweasal is hidden, so I switched the resolution to 800 by 600 and then i load up evolution and find that the forward button isn't visible, is there a way to get a custom resolution that works with everything
View 10 Replies View RelatedI just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.