In my menu bar under Places, I could see my Windows partitions being displayed as 20 GB Filesystem and 25 GB Filesystem which are basically C drive and D drive respectively. Is there any way I could change the way the partitions are displayed under the Places menu. I want it to be displayed as C Drive and D drive instead of 20 GB, etc.
View 2 Replies
I am having a dual boot setup with Lucid Lynx and Windows 7. I want to automatically mount the NTFS partitions whenever I login to Lucid. I am looking for a graphical tool to set this up. Kindly suggest one.
View 3 Replies View RelatedAbout a month ago I did a clean install of Kubuntu Lucid. I believe it was after that point I was unable to run other LiveCDs without some problems -- I first noticed that swap partitions failed or weren't detected. It appears that partition managers such as gparted, fdisk, etc cannot detect my partitions and interprets my hard drive as "unallocated" (this has been tested with multiple LiveCDs). However, as far as I can determine, all the LiveCDs with applications for mounting drives and HD backup ARE able to detect the partitions.Furthermore, when I am in Lucid, I am able to detect the partitions with gparted.It's very odd... I've only found a few situations like this on the web. Could it have something to do with the GPT?[URL]
View 7 Replies View RelatedFairly new to Ubuntu (started with Karmic), now dualbooting Lucid and Windows 7. Lucid is automatically mounting my NTSC partitions, which is pretty convenient since I store all my media there, but I recently deleted one of the partitions and just extended the other one. Now Lucid is still trying to automatically mount the partition that no longer exists and giving me an error message every time I boot up. Not really a big deal, just a minor annoyance, but I'm wondering what I do to make it realize the partition is gone.
View 7 Replies View RelatedI created a customized Lucid image and installed on my computer which has 1 hard drive (/dev/sda)When I booted up .. it gave me an error indicating "Multiple active partitions" ... and did not boot up ...
I used my live CD and run as live session to check on the hard drive, When I issued the command fdisk -l on an terminal , the out put indicated that only /dev/sda1 is bootable, and other /dev/sda* were not bootable ...
I am not sure why I got the "Multiple active partitions" message at boot up time ..
During booting of lupu 5.20 ,It starts searching for puppy files in computer disk drives,says boot partitions not found, dropping out to initial ram disk console then /bin/sh: can't access tty: job control turned off # it remains at this position for ever. I have been using lucid puppy 5.1.1 with pen drive through multibooting software of pendrivelinux. I have P2 with 256MB ram, hdd 10GB,usb pendrive 1 GB.
View 3 Replies View RelatedI just want to know weather it is possible by some means to set different preferences for the two desktops that are available in ubuntu?? E.g.: different backgrounds, shortcuts etc...
View 2 Replies View RelatedSo, in the system preferences there is a setting for the laptop touchpad. I never use it and want it deactivated. Unchecking the box and setting the program as a startup app isn't doing it. So how do i go about it? Correct me if i'm wrong, but i'm thinking the best way is gonna be to edit the startup command for the app from:
command: gsynaptics to command: gsynaptics + "whatever the commands would be to tab to the first item and hit space" I have NO idea what that command would be or if it's possible.
Is there a way I can customize what does and doesn't show on the indicator applet? For instance I *much* prefer the standalone clock application to the indicator applet version...
View 3 Replies View RelatedFirst off I got to say that Natty is pretty interesting. I really like the space-saving techniques with the omni-bar, vertical app panel, and very fast omni search (similar to windows 7 but much faster). It will take getting used to but I think in the end it will eventually make working much easier and quicker.
It is in beta so I won't get ahead of myself and make assumptions but it seems like Ubuntu has sacrificed a lot of customizability with this release. A few things I've notice that maybe I can get some clarification on-
1. I cannot add panels or items to panels.
I would like to add the system-monitoring tools to my top panel so I can see when my CPU and RAM spikes.
In addition, pidgin no longer appears in my tasks bar. I'm guessing this is a bug? (I prefer it over Empathy. Rather not switch).
2. I cannot find a feature that leaves my vertical app bar visible all the time. When I make an application go full screen it pushes it out of the way. This is a bit annoying when I'm trying to find a file, folder, or application quickly.
Also when I open a file that I didn't mean to open I would like to see it popup in my app bar so I know instantly where to find it and close it. With this I will have to search for it.
Of course this all takes only a few extra seconds.
3. I cannot change the size of my apps in the app bar and it doesn't automatically resize. This might not be a big issue for some but I use my Linux OS solely for work. As a developer I often have upwards of 20 files open and it usually fills my screen when using my avant window navigator. This is significant since I have a wide and short monitor.
4. I am unable to change the orientation of the app bar. This goes back to the fact that I have a wide and short monitor. Because of this it may seem better to fill up space vertically by adding a vertical app bar, but I have so many apps and usually work in text-documents that it would be better for me to have a horizontal app bar.
5. Unable to remove unneeded buttons. My app bar is going to fill up very fast. I do not need a workspace switcher, a home folder, the applications button, or the trash visible in this app bar. I will use these rarely and I would rather make room for apps I use often.
6. Apps at the bottom of the app bar does not adjust context menu accordingly.
However I do like how Ubuntu is finally clipping unseen areas. I am using dual monitors and the one you are looking at is the short one. So when i take a screenshot I can see black area below. In previous versions I would be able to see the overflow. Does this also mean we are finally double image buffering as well?
7. I am unable to change desktop effects. I don't need a massive fancy shadow on every window. I prefer speed over desktop effects (but use Ubuntu for non-free software support).
8. I cannot move the Files & Folder button to the top. I would have use for this context menu since there is no longer a places button in the top panel. But I would rather have it at the top so I can access it easier.
9. Cannot clear recent file's history. As a developer I've worked on a couple adult entertainment related sites. I like to keep these hidden from my little ones for obvious reasons but now it seems there is no way to remove them from recent file history. There should be a context menu for this.
I'm trying to customize an Ubuntu 10.04 server ISO (I've done desktop CDs before) but the guide at[url]...DCustomization isn't making any sense to me.
I want to add new packages and update official versions with custom ones. Let's say I want to update/add my-util-package and plymouth-theme-ubuntu-logo.
I decided I would try to custimize Fedora to my liking (which proved to be overwhelming). I installed Compiz-fusion and enabled "wobbly windows", which forced me to disable "snapping windows". After doing that, I rebooted to enable the effects and it starts up to a command line.I pressed CTRL+ALT+F2, logged in and ran "rm -rf .gnome .gnome2 .gconf .gconfd .metacity" which I was told would reset my gnome shell, which it didn't. I know Compiz Fusion caused this crash, how can I revert back or at least get my GUI back.
View 1 Replies View Relatedlinux newbie here -- there is a feature in windows 7 that I would love to make work here. I'm sure there is some way to do it, given how customizable linux is, but I have no idea how.
In windows 7, if you hit the Windows key + the left arrow, it will automatically resize the window you are looking at to fill half the screen, on the left side. Likewise if you push the right arrow, for the right side, Windows+up arrow maximizes, and windows + down arrow minimizes. Does anyone have an idea of how I can configure ubuntu to do the same thing?
I just upgraded to 10.04, and now I can't figure out how to customize the color of the system drop-down menus (Applications > Accessories, etc.). After I made a change to the appearance, the colors became all washed out (as in the screenshot), and now I can't figure out how to darken the drop-down menus. Anybody have any tips? My ultimate goal is a darkened version of the new Ambiance theme (think XFCE Dusk colors with Ambiance buttons and layout).If it helps, I just upgraded from 9.10 to 10.04, and I've had KDE, XFCE, and GNOME all installed (and most of each set is still there, as I'm experimenting with each one).Also, the system tray is no longer home to a sound volume button, is it supposed to be that way? How to I get one back up there?
View 1 Replies View RelatedWhat I'm looking for: A way to change the linux iso once I download it so that it contains some packages that are not typically with it (basically the ones I download and install after the fact). This would include things like OOo 3, my wireless card (it would be really cool if I could use that on a live distro that I run from my flash), and a few others things that I think I could manage if those other two could be explained to me.
View 4 Replies View RelatedI have installed opensuse 10.3 on my system and after sometimes I installed ubuntu 8.10 on my system from Windows (I just double click ubuntu 8.10 setup and ubuntu 8.10 takes care of the rest of installation.) Now when I start my PC I was displayed a menu from where I have to choose either Windows or Opensuse. When I select windows again I was shown a menu in which I have to choose either windows or ubuntu. I want to make only one menu in which I was shown all three OS installed!
View 3 Replies View RelatedNot sure if this is just GNOME 2.30 removing customization ability, but I can't find how to add icons to the menu dropdowns and customize the nautilus toolbar (put text below buttons, etc) in Lucid. Is this function still there?
View 3 Replies View RelatedI've been making a "gui" for a script to help automate some of the steps involved in customizing a live cd with zenity. I have a menu with radio buttons for each option. When I pick "Remove a package manually", I have it show all of the installed packages as well as a text box for me to type the name into. The only downside to this method is that the package window overlaps the text box. Is there a way to change the window position of zenity windows?
View 2 Replies View RelatedI want to play around my .bashrc file, but I can't seem to find a general guide to customizing it. I just want a guide that will show me examples and explain them in-depth.
Does anyone where to find one?
I think I've gone through every media player there is out there for Ubuntu, and the one that's come the closest to managing my library the way it's managed in Windows with MediaMonkey has been Banshee - being that at least it supports the albumartist tag.
But it still doesn't work as well as I'd like. In the 'artist' tag field I use the semicolon ( ; ) to separate the artists if there are more than one. For example the artist tag of a particular song may look like this: Blakroc;The Black Keys;Nicole Wray
MediaMonkey would see this and separate the tag so that each of the contributing artists would have this song under their name. Every media player on Ubuntu (that I know of) sees this as one artist in itself, so in my Artist section I could have a bazillion 'artists' who are in fact all the same artists.
My first question: is there a way to get Banshee (or another media player) to recognize the ' ; ' in the tags in the same way as WMP and MM do? My other question: is there a way to change which tagging fields Banshee looks for. For instance, when determining the album artist, some media players look for the 'ALBUM ARTIST' tag, others look for 'ALBUMARTIST' while others look for 'BAND'. They all mean the same thing but when your music is tagged in one program, it turns out completely different in another.
I have been using Fedora 12/13 for last 6 months or so but still I never tried my hands with the customization of its desktop and its kernel which is the beauty of Linux so I want some links or guidelines about how to start doing something meaningful with Fedora.
View 4 Replies View RelatedI have a Linux system, RH Enterpise 5, that I must toggle between two different languages, one being English, but when I am in English mode I only want to get capital letters for my user programs. I can't use the Caps-lock key, because then the default key to toggle between the languages no longer works when Caps-lock is on and I need to be able to switch back and forth languages with a single key stroke. So, I need capital English letters but mixed case second language characters and a single key to toggle between the two. I can't figure out a solution for this. I have tried different mods to xmodmap, but can't solve it for both languages.Oh, slight correction, the default keys for toggling languages Alt-R and Alt-L are fine, just need upper case in English mode.
View 11 Replies View RelatedI know there are similar topics about this that have been posted, but the information I need I cannot find. Im in a situation where I have two new HP DL360 G6 servers, both have a HP Smart Array B110i Sata Raid Controller. Since the raid controller is so new CentOS 5.3/5.4 and RHEL 5.3/5.4 do not have support built into the installer.I do have a driver for the raid controller which I have used and successfully installed CentOS 5.3 on one of the systems.The reason I need to customize an ISO is because I need the raid controller driver as part of the installation disc. As these systems are servers and are going to be deployed remotely I will not have physical access to these systems if they need to be rebuilt. I also have to build machines remotely as well using iLO (having a floppy image or usb image of the drivers does not work through iLO).
The installation rpm's can be as is, I do not need to make any changes there. I just need to make sure that the raid controller driver is loaded into memory from the media rather than another media source, before the installer kicks in.
To flesh out my *nix capability, I create new identities and give them the functionality that I liked in previous ones. I've added the "open terminal here" script, which I find invaluable. Now I want to change the prompt. This is what the terminal does right now:
ITo run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
elliot@dan:/media/KINGSTON$
- Where do I go to shorten the prompt dramatically? I can't really think of a situation where a shorter prompt isn't better or color matters.
- How do I adios the 2 sentences that want to appear every time I open this terminal? I'm aware what sudo does.
- Instead, I would like the equivalent of a pwd command. Where would I put that?
- How do I get the output of this terminal to be simultaneously saved in a file. I do so much copying and pasting out of these terminals that I'm looking for easier ways to do it.
I changed the default SUSE prompt setting by modifying the shell variable PS1 to display the following information:
u : the username of the current user
h : the hostname up to the first '.'
w : the current working directory, with $HOME abbreviated with a tilde
I used export command to setup a new shell prompt:
export PS1="[u@h: w]$ " To add colors to the shell prompt and make a regular user prompt blue I used the following command syntax:export PS1="e[0;34m[u@h: w]$ e[m "
[Code]...
linux-2.6.18-6-686 (etch)
# make menuconfig
I am customizing a kernel and am wondering if there is any advantage to excluding drivers/modules I will not need. My goal is to have a very stable file/web server that boots quickly. The only reason I am customizing this one is to add the SATA drivers for the motherboard I am using.
Here is what will be on it:
Apache / PHP
MySQL
DHCP
NTP
I am just customizing CentOS and would like to change "Welcome message[image is attached] to something that I wanted. I went trough the anaconda source rpm and found that OS name is being picked by %s and not sure what %s refers to or where is that variable it pointing to.
View 2 Replies View RelatedI'm trying to find a GUI program (not a terminal command) to bind the 4th and 5th buttons on my mouse to ALT+Tab and Escape. I tried BTNX however I encountered the error "btnx-config needs the file /etc/btnx/events to run". A good example of what I'm looking for with screenshots on it's site is X-Mouse Button Control which I've been using on XP however it's not available for Linux.
View 2 Replies View RelatedThe distribution I chose came with the GnoMenu, and it's really cool that I can customize it. But so far I only know how to change the GnoMenu button itself to things that I have to download from the internet. How to create my own GnoMenu button themes? And sound themes, if you have a lot of spare time?
View 1 Replies View RelatedI am working on Fedora, I am trying to figure out if there is any way we can set limitations/rights to linux desktop, so that we can control which things user can access, like if i dont want user to have access to kde control center, and should not change the settings in it, or disable changing wallpaper,or disable changing screen saver. How that can be done in linux?
View 3 Replies View Related
