how to cross-reference it but searching on 'Could not initialize the browser's security component' will find it. Then look at the last 3 entries. Me and two other users have been unable to use Thunderbird since yesterday's update.
View 2 RepliesUbuntu shows the following error message when I try to launch Firefox "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." No other program including Google Chrome has this problem.
View 2 Replies View RelatedTrying to install the Suhosin module with the php 5.2.9 c5-testing repo...it won't run with the php 5.2.9 testing build (there isn't an updated suhosin package against the 5.2.9 build)
PHP Warning: PHP Startup: suhosin: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
What's the best way to handle this from an admin best practices standpoint? I want to do everything possible to keep the suhosin module tracked by yum for future updating etc. Is it best to try to find a suhosin rpm that is built for 5.2.9 and install it with yum localinstall? If not, if I build the module myself, what's the best path to keeping yum/rpm in the loop on this install for future updating via yum?
im using firefox 3.5.7 with ubuntu 9.10 but firefox since 3.5.6 and 3.5.7 keeps crashing a lot-just now it crashed my entire system-the whole screen went black. So to that end is use of opera or chrome secure for ubuntu?
View 9 Replies View RelatedOk i think Tor has some way of making the dns queries anonymous by default. I did the DNS nameserver spoofablity test here at [URL] and the results i got showed about 30 different dns servers. Normally when i carry out this test on my standard isp connection or the vpn i use i just get one dns servers settings consistently.
View 1 Replies View RelatedSo I downloaded a movie from megaupload and a pop up came up with [URL]....that bounced me to[URL]..but that webpage did not display. Normally, on Windows, I would have an anti-virus that would likely give me some sense of good or bad websites. On Ubuntu, I am not quite sure. Do I need a malware scanner for the firefox browser? I have the standard package from the 10.04 distro with the latest updates...
View 5 Replies View RelatedI am trying to use apparmor to restrict my file browser, which is Thunar to only let me view the files that are in the home directory and also removable media.I tried following the apparmor sticky with no success.I created the profile and tried editing it and it either started and let me do pretty much everything or did not start at all. Would it be possible for someone to help me step by step to set up a profile for thunar that would only show the home directory and removable media.
View 2 Replies View Relatedwhats the most secure firefox browser for karmic that i can use from a PPA source ? that source must be trustable.could you tell me the PPA for the one in question as well ?
View 2 Replies View RelatedThe cryptographic underpinnings of the Internet, as presently constituted, are messy, chaotic and rather randomly constructed. And that infrastructure is not only ripe for a variety of attacks, but is not easily fixable, a group of experts said Friday. At a forum on browser security sponsored by a Washington policy think tank, a group of technologists and policy experts from industry and government outlined the serious architectural and implementation problems with SSL, the certificate authority infrastructure and the way that browsers handle certificates. It was not a pretty picture. The problems extend from the way that CAs issue certificates to how certificates are handled by the major browsers to the way that attackers are able to take advantage of the weaknesses throughout the system.
View 1 Replies View RelatedOnline, I see many security alerts firefox but none related to Opera or other browsers. Is Opera more secure than Firefox?
View 3 Replies View RelatedThis is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
Browser can't find server at att.yahoo.com so no internet. My folding at home client with Stanford can't download {an upload went ok}. I have 2 other fedora boxes & 3 windows boxes thru the same router and they are all fine.
I can manually ping Stanford ok,
Add/remove software within fed. works ok.
I can type in 192.168.0.1 & get the page for my router
The only thing I did between working & not working was to install
Nvidia Cuda driver for my GTX275
My guess is something in the firewall got tweaked. but I've compared it to 2 working boxes & nothing jumps out at me.
I have a F11 box serving xdmcp. I log into them machine remotely with xming. As far as I can tell, all x clients work fine, EXCEPT for sealert. I get occasional selinux alerts, but I cannot use the sealert browser on my remote machine. When I try to run the browser, I get this: sealert -V -b
2010-03-05 11:27:49,841 [dbus.proxies.ERROR] Introspect error on :1.61:/org/fedoraproject/Setroubleshootd: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) 2010-03-05 11:27:49,842 [dbus.proxies.DEBUG] Executing introspect queue due to error 2010-03-05 11:27:49,842 [dbus.ERROR] could not start dbus: org.freedesktop.DBus.Error.ServiceUnknown: The name :1.61 was not provided by any .service files
I see the bug at [URL].. but it does not mention the browser, nor does it say what the fix/workaround is..Im going to stab in the dark and start relabeling things, but anyone know what's really wrong?
I was recently connecting securely to the website where I have my mail account, and I connected through Tor. When doing so firefox presents me with the screen saying that the connection is untrusted and it can't verify the certificate. So I cancelled. I'm using torbutton and I turned torbutton to off and connected again with no problem. Then with torbutton on again, same thing (untrusted).
Is it possible the exit node I was going through is doing a man in the middle attack? However later when connecting through tor I did NOT get the warning about the site being untrusted. I really don't know what exit node I was using when I got the certificate warning and what exit node I was using when I did not recieve the warning. I don't know how long I stay on the same node or how/when it changes.
We have a web server running apache and a custom web app that we log into from a web browser and it ask you to except the certificate and all is well. I now have an user who is using a window server 2008 and he wants to manually import the *.cer file into his browser to be able to login. My question are:
1 - What is the file that is being imported into the browser? *.pem *.crt
2 - I see on our server that we have our certs I believe located in the /etc/pki/tls/certs. The openRADIUS servers that I have created, this is the directory to where it is stored.Is this the typical placement for certs.
3 -If the files is a .cert or *.pem than could I use openssl to convert them to the appropiate *.cer file for IE7
A researcher at security firm Alert Logic has published code that could be used to compromise some versions of Google's Android Operating System. The exploit, if properly adapted, could make Android phones vulnerable to remote attacks and compromises.
View 2 Replies View RelatedOne of my user wants to be able to upload file via browser to the server. For that, i need to grant apache read and write access to a folder. How much secure is allowing apache to grant complete read and write access to a folder ?
View 2 Replies View RelatedLong time Ubuntu user, but it's been a couple years.
My friend had an old Dell Dimension E251 lying around and I said I'd help him turn it into a media center of sorts. The old 52" HDTV he wants to plug it into has a broken vga input and no HDMI, so our only real option is component or (heaven forbid) S-video. He can afford to get a new video card if it's relatively cheap, and I'm not really sure what would be our best option. Does anyone have a card in mind that would be relatively hassle free? I considered getting a card with HDMI output and using one of those HDMI to component converters, but my research suggests that that won't work. Are there old cards with component out, or is there a card that makes this relatively easy to achieve?
The web server component of Apache isn't actually called "Apache" right? It is called something else? I didn't realize there were so many parts. Also, is there a good newbie introduction to how to configure it for a basic web server?
View 5 Replies View RelatedOvernight, I upgraded from KDE 4.5.1 to 4.6.3 and had a rude awakening this morning when I found that KDE had managed to, once again, break the Task Manager "force rows" behavior which had been fixed a few major releases ago. I found this lovely patch that had been applied:
[URL]
And thus broken the functionality, and I want to recompile that particular plasmoid with the patch removed. However, I am completely unfamiliar with CMake or building anything at all, for that matter. All my programming is done in PHP which means I'm pretty much completely lost. I'm in the midst of pulling down the kde-workspace tree with git, and already downloaded and modified a separate copy of the file in question to look the way it is supposed to. I don't want to rebuild all of KDE, just the one module.
I had a RAID1 array with two disks. I wanted to remove one of the disk and replace it by a new one. I first expanded the array from 2 to 3 components and let RAID rebuild completely. When this was done I used Gnome disk utility (palimpsest) to remove the component on the disk I want to get rid of. It looks like palimpsest did mess up somewhere because the array is no displaying as degraded. How can I get rid of the "removed" entry (was /dev/sdc1) in the RAID array (and hopefully have it come in Running state)?
#/sbin/mdadm --detail
Raid Level : raid1
Array Size : 732570841 (698.63 GiB 750.15 GB)
[code].....
I am trying to pinpoint which component of my machine is dying. Here's what I get when I try to install Windows 7: The specified I/O operation on DeviceHarddisk0DRO was not completed before the time-out period. I have tried changing hard drives, swapping memories (running them in single and parallel), changing BIOS settings, etc. When I run a live CD with Fedora, it will come up fine but when I try to install it runs like a snail. It will never complete.
View 4 Replies View RelatedI had to reload my openSuSE 11.1 and reloaded KDE 4.3.4 from KDE Repositories and did an unconditional update on KDE Core and Community to ensure I got all the current versions back.
I am now having an issue with at least two plasmoids that is regularly used. When I attempt to add them to the desktop, I get the message "component not found". This happens to at least these two, yasp and yawp for system status and weather. It may happen to others, I haven't tried.
They are both loaded and both are present in /usr/share/kde4/services. I removed them using YaST, then rebooted, then re-added them, then rebooted and still get the same result, component not found.
Today I've setup Debian Squeeze for netbooting with tftp-hpa and isc-dhcp-server. I have also downloaded-only all gnome packages (apt-get install -d gnome) and setup a small apt repository for base system and gnome on the same pc (server).However, my small apt repository is missing debian installer components like libc-udeb, dmsetup-udeb, ppp-modules-udeb, etc. The question is: Where to obtain those packages and their dependencies? I cannot find or download them with apt-get nor aptitude.
View 2 Replies View RelatedDoes anyone know which component of the GNOME desktop is responsible for interpreting the media buttons on my keyboard? I would like to run this component in KDE, because KDE doesn't handle the media buttons correctly. I am not talking about the icon in the system tray.
View 2 Replies View RelatedI am using a NVIDIA 9400GT video card on the latest Ubuntu. I believe the video card is a DVI-I port because it has the correct pin settings - [URL] I am using this DVI to Component adapter - [URL] The adapter is marked with Y Pb Pr above the RCA jacks. So it is analog and the vido card port is DVI-I ... all is correct ...
I am connecting to a DYNEX DX-LCD22-09 TV with HDTV component cables. The TV accepts both YCbCr and YPbPr signals. When I first boot the linux box there is no signal. Then right before it auto logs in I get a picture that is all green on the right side, black everywhere else and the TV displays it is at 1280x720 60hz. Finally the screen goes blank when the machine logs in - no signal! I have tried all combination of the adapter settings and have looked over the component input and output cables many times to insure I have it setup correctly.
I am trying to install Android development plugin to Eclipse, but it has a problem with version (i think). I installed my eclipse using yum.
Now, I want to try uninstalling eclipse and use the version from the eclipse.org website instead to avoid this problem. I run rpm and got the folllowing mesg.
Code:
How do I uninstall all the eclipse component and re-install it fresh?
after logging into my ubuntu 10.10 netbook edition, I see that my gnome desktop just hangs on the background desktop screen. when i check my .xsessions i see the following errors listed below.how to fix these error messages?
gnome-session[1583]: WARNING: Unable to find provider 'mutter' of required component 'windowmanager'
gnome-session[1583]: WARNING: Unable to find provider '''' of required component 'panel'
GNOME_KEYRING_CONTROL=/tmp/keyring-ObEeS8
[code]....
i have harddrive on which raid 5 is configure and no file system is configured.so i want to access the data on auto raid component harddisk.could any one telme how to access auto raid component hard drive.when im connectingto my laptop its not opening.when i check in disk analyzer its showing auto raid component harddrive.please helpme to access data inside the raid drive.
View 2 Replies View RelatedAfter upgrading to KDE4.7 I would get the error message, "A KDE text-editor component could not be found. Please check your KDE installation.", when I clicked on text files. The all knowing Google provided no answer so I am leaving my solution here in case others are as unfortunate.
For some reason kdelibs3-32bit is pulled in when I upgraded to kde 4.7, removing it fixed the problem.