I had Compiz Fusion working about a week ago and when I got the linux ATI driver it stopped.
Appearance Preferences: When I click on "Extra" it returns "Desktop effects could not be enabled"
I have a Radeon HD 4870.
Compiz stopped working entirely recently and I've been trying to reinstall different version, nothing helped. Now when I look at synaptics, the version of the different package (compiz, ccsm, bcop...) are of different version (from 8.2 to 8.6). It tried reinstalling only from synaptics and it didn't change anything. I'm not sure that'll fix my problem, but for sure it doesn't help. Does anybody know what repos i should use to get a clear installation?
View 1 Replies View RelatedDebian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
View 6 Replies View RelatedI did a clean install of Ubuntu 10.04 on a Toshiba Satellite, Intel graphics card, a few days ago, and had no trouble accessing the CompizConfig Settings Manager. I changed a number of settings, and everything seemed to be working just fine. But two days ago, I noticed that the compiz effects (rotating desktop cube, minimize effect etc.) were gone; and when I now try to access the Settings Manager, I see a "Starting CompizConfig..." appear in the panel and linger for about five seconds; then it's gone. No settings manager, no error message.
The day that happened, I had (to the best of my memory) not installed any updates. I had, however, removed a bunch of applications through the Software Center. I had also launched Ubuntu Tweak and changed a couple of settings. The only option it showed, and shows, under 'Compiz Settings' was then (and still is): "Prerequisite Conditions" : "Install Advanced Desktop Effects Settings Manager". The box was checked. I have since unchecked and re-checked it, thereby uninstalling and re-installing the settings manager. But that hasn't changed anything.
[Code]...
Ever since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
View 1 Replies View RelatedMy problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.
View 6 Replies View RelatedI cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
I'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences.
Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
I installed openSuse 11.3 gnome 64bits edition 2 weeks ago and was pleased. Yesterday I wanted to monitor my ATI 4850 temperature so I decided to install ATI official drivers, which turned to be a big mistake.I ran this script found on this forum :
Code:
#! /bin/bash
# --------------------------------------------------------------
# What This script does the following :
# - unload fglrx if needed
# - make a copy of /etc/X11/xorg.conf (if any)
[Code]...
Once rebooted, I wanted to enable compiz effetcs, an error message said there was no driver detected, I was surprised but clicked to enable effects. No effects were enabled and worse, window borders disappeared. There is no more window manager. I search on this forum, tried to boot in level 3, ran the script again. The problem remains. However if I boot in level 3, then type "startx" I have window borders but scrolling is terribly slow, just as when there is no driver installed on Microsoft Windows. I have some basic knowledge of Ubuntu, but I was clumsy with openSuse. So here are my questions :
1) how come compiz is not supported when official drivers are installed ? on Ubuntu it's the opposite, compiz requires proprietary drivers 2) how can I fix this mess ? I tried to reinstall Xorg but I fear to worsen everything
I have an HP Pavilion laptop running Xubuntu 11.04. It has an Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) chipset. The driver I'm using is a vesa driver. I ran a check from compiz-check.com to see if my computer could run compiz and it said that I don't have the right driver to run it.It asked if I wanted to check for any proprietary drivers, I ran the check and it came back with nothing. I used to have Ubuntu 9.10 on this same laptop and it ran compiz no problem so I'm a little confused why it won't work with the newer version. Is there something I'm missing? Maybe another driver out there I can try? And if there's really nothing I can do, is there anything out there comparable to compiz that my computer could run? I've been hesitant to upgrade from 9.10 because I ran into this problem with 10.04 so I went back to Karmic and stuck with it until they weren't updating it anymore.
View 2 Replies View RelatedI have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies View RelatedA couple of issues with compiz. I'm setting up Debian Squeeze on a new-to-me laptop. Video card is nVidia Quadro FX 570M.
I installed the nVidia non-free driver, and that's working fine. Compiz starts up ok (I say "compiz --replace"). At least some of the effects are working, and the windows look normal.
First issue: as soon as I start Compiz, the number of workspaces goes from 4 to 2. And Workspace Switcher Preferences (the thing that pops up when you right-click the workspace switcher in the Gnome Panel) no longer shows the controls for changing the number of workspaces.
Is there is a way to change the no. of workspaces using gnome configuration editor? That might be a good workaround.
The second issue is, compizconfig-settings-manager will not run, whether Compiz is running or not. I don�t know if it would run before I installed the nVidia driver (Compiz wouldn't run so there was no reason to try CCSM). When I try to start it from the menu, I get the spinning cursor for several seconds, and that's all. When I say "ccsm" in a console...
Code:
I dont think the locale error is the problem. I get locale warnings all the time, like when I use apt-get, but it doesnt stop the program from running. But I could be wrong about that.
I am extremely new to Linux and cannot seem to get Compiz Fusion working. I am running Xubuntu 9.10. I enabled my video driver but the effects still aren't working.
View 1 Replies View RelatedI have installed Debian Lenny and the Driver for an NvidiaCard GTX280. As this card is not supported by the debian-repositories, i have installed the driver from the nvida-Site. It works ok, but there's one thing: When i have compiz fusion activated, the caracters in the shell are sometimes hidden (pls see attachment).
View 4 Replies View RelatedI have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View RelatedI have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line. I think I accidentally uninstalled some packages clicking at completely removal at some ipod utilities in synaptic.
View 3 Replies View RelatedI have just booted up to do some local work on my website and apache 2 has start throwing 403 error's at me? phpmyadmin and other alias's I have setup work but the main root just 403's on me?? It has been working away flawlessly for months now. No system upgrade has recently updated Apache and I can see no errors in my set up files!
My default setup file:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/gavin/wwwsite
<Directory "/home/gavin/wwwsite">
Options +Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory> .....
I get an error from the terminal when I run the operation "compiz --replace"
Code:
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
(process:2192): GConf-WARNING **: Directory `/apps/compiz' was not being monitored by GConfClient 0xa1f7c20
I am getting following error while trying to enable 'compiz' in 10.4.
"Desktop effects could not be enabled"
Output of [URL]
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
[Code]....
So, it looks like my hardware support all what it needs for Compiz. What else is going wrong here?
Ubuntu 10.04 x64.This past week Update Manager came up and offered to do a partial upgrade, as some packages could not be upgraded. I had just assumed the 'partial' was an issue with Opera (as I have seen in the past), so I allowed it and let the update go through.
This morning when I turned on the system, Metacity is running, and Compiz is not. My first thought was that the update somehow changed my defaults, so I went to change them back. Desktop Effects could not be enabled through the menu (there was a screen flicker, then a "Desktop effects cannot be enabled" error).
Running compiz from the terminal does this:
Code:
barry@Independence:~$ compiz --replace
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager Various other methods I found on the forums to fix it left me in the same state. Clearly there's some issue that is preventing compositing or some other effect from working that Compiz needs. I've never had to troubleshoot an update before, so I'm not sure where to look to see what exactly was changed.
I've been burning a few linux ISOs lately to play around on a desktop I have (archlinux, Fedora, etc) and a few days ago Brasero stopped launching. I tried to uninstall/reinstall Brasero, but it still didn't work. There we no error messages, it would just try to start up, and quit.
I got frustrated and tried to run Brasero from the command line and got this:
Code:
user@computer:~$ brasero
Bus Error
user@computer:~$
I got an ISO from a friend and it's been sitting ontop of my desktop for ages now, and I'm not able to burn it because for some reason, Ubuntu has stopped reading any CDs in my drive.
G.B. on burning it:
Code: scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
code....
I've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.
Does anyone know what I can do to alleviate this Script Error?
Code: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://[url]....
suddenly developed this Script Error over the last 24 hours... Also, it is way slow, suddenly, and graying out. Could that just be because I caught up my Comcast Bill yesterday ?
I have 10.04 installed and Update Manager has worked fine for months, until about 2 weeks ago. When I ask Update Manager to update its indexes, I get this error message returned almost immediately
"Method http has died unexpectedly!
Sub-process http returned an error code (127)
Method http has died unexpectedly!
Sub-process http returned an error code (127)
The internet connection is working fine on this machine. I have another 10.04 machine sitting right next to the problem computer, and Update Manager works fine on that machine. I verified that all settings are the same between the 2 machines in these areas
1. All Update Manager SETTINGS (including SOFTWARE SOURCES)
2. System -> Preferences -> NETWORK PROXY (which is a Direct Internet Connection)
3. System -> Preferences -> NETWORK CONNECTION
It appears to me that the connection to Ubuntu repositories is failing but I can't find anything different between the 2 machines.
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
I'm not sure exactly when but my amarok has stopped working at all and just shows various errors. I've pasted binned it as its so long :[URL]
View 2 Replies View RelatedI had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
I was installing compiz on my machine and towards the end of installation i got an error saying:
dpkg:error processing /var/cache/apt/archives/udev-151-3-i386.deb
The program returned valude 1 or something towards that direction. I rebooted my X server however i got an error saying X server encountered a problem. I did apt-get install compiz and found out that many dependencies were missing so i tried apt-get -f install but i got the same error message at the end of the day. Im currently booted on windows XP.