Im checking some webpages Im trying to update using tidy. Im getting some messages about the doctype of my pages, Im trying for HTML 4.01 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
but I keep getting some comment which amounts to the doctype not being formatted correctly.
Does Anyone Know what the correct doctype format for html 4.01 transitional is?
Code:
tidy doctype myHtml.html
I'm trying to determine if IE is viewing my web page with the following HTML code:
Code:
But I don't see anything except "Test for IE". It is like the tests are being treated as comments? Do I need to turn something on in the server?
I have both a mac and ubuntu box sitting on my desk. I work on the mac and access the ubuntu box over ssh.Often I need the point-and-click interface of the ubuntu box, at which point I run gnome-session. The problem is that the top and bottom menu bars fill the full size available to them, which can cause me problems (I use two different-sized screens and the barsget hidden), and overall it looks very messy. I would therefore like to confine the gnome-session to a window, much like you get with vnc (or parallels if you're running a virtual ubuntu session).
View 5 Replies View RelatedSometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies View RelatedI used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies View Relatedwhat is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:
Quote:
<script type="text/javascript" src="path to file/include-file.js"> </script>
however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:
1) the fact that the included file is static html and because the text is included pretty much everywhere
2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.
Is it possible to have a drive dedicated to parity check for several other drives and not use a raid?
I want to keep all the drives separate, raids seem too dangerous.
I have Update Manager set to check for updates daily, to 'only notify about available updates', and have 'important security' and 'Recommended' updates turned on.Since upgrading to 10.04, Update Manager never starts up to tell me that there are updates available. If I run it manually and click on 'Check', I have to type my password in and then it will show that I have updates to install (if there are some of course).
I realise that I shouldn't get a notification icon any more, and that update manager should open instead.Anyone know whether this is something I can fix, or if it's a bug or a problem with the update server that I can't do anything about other than wait?
Sometimes when Ubuntu starts, it appears a screen with "Scanning disk in progress. It may take some time". But after it reaches 70% it completely stops, so I have to do a hard restart . Can I just switch off this automate? It doesn't help only makes problems. And slows down booting.
View 9 Replies View RelatedMy laptop keeps saying Checking battery state is that something to worry about? The laptop goes has a black screen on it saying Checking battery state then says ok.
View 4 Replies View RelatedI'm working on my first bash script. My script will do several things but right now I'm just trying to get the basic part of it down and working.I have a section that looks like this
Quote:
#/!bin/bash
SERVER=$1
if [ ! -d `ssh ${1} /somedir`];then
echo "Bad"
[code]...
The problem is that if you take that right now and run it, it will return back good in that it does exist. What I need it to do is pass back that it's bad because it doesn't exist (that is unless you actually do have that directory in your root).
I am getting some error when i compile cross compile "dbus-1.2.20".error
Code:
checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
I would like to ask some questions about checking which driver loaded for a hardware. Information: I am using Ubuntu and Xubuntu version 9.10.
1. For all types of hardware (including but not limited to network adapter, video card, sound card, USB devices, etc), if the command 'lshw' configuration does not show the loaded driver for a hardware, but the hardware work perfectly, is there any other way to know which driver loaded for that hardware WITHOUT ANY RESEARCH ON THE INTERNET, (and for network device, without using "connection information" feature in NetworkManager) ? If yes, how to do it?
2. Does your answer in question 1 will work for external hardware (hardware based on USB, FireWire, etc) and also the other non-pci based hardware? If it will not work, any other ways?
3. For your answer in question 1 above, do I need to install any packages that was not installed by default during Ubuntu installation?
4. For network hardware, "connection information" feature in NetworkManager does show the driver information. But, like stated in question 1, "lshw" command does not show the information about the driver used, then how NetworkManager get information about the driver used for a network hardware?
I have noticed that Ubuntu checks the / (which includes my home folder) for errors after a certain number of boots.
But the problem is it never checks another partition (Reiserfs) which I had created during installing Ubuntu.
I keep all my data there.
Now how do I configure Ubuntu so that it checks the partition I just mentioned ?
My brother gave me a copy of Ubuntu 10, since my upgrade from 7.04 to 7.10 screwed up. Installed it easy. But strange problems occur. After a few minutes of starting the system, it enters a command prompt, regarding "Checking batter state" yet my computer runs on an adapter, no battery exists (except the built-in one on the motherboard), and I have to restart my computer.
View 7 Replies View RelatedI've been using Eclipse for Java, and it has a nice feature that allows for syntax checking while as you type your code. I downlaoded Eclipse-CDT to write my C, and it has the same feature except it is much less helpful (ie. suggesting a correction, or where the error is).Is there an IDE that has a good realtime syntax checker? This is to help my noob C and C++ programming
View 1 Replies View RelatedI have newly installed Ubuntu 10.04 lts. Everytime when I am boot my system, Ubuntu try to check my harddisk. I am stopping that by pressing "c" key.Why it is so? anything problem with my hard disk or I need to disable anything for avoiding it for everytime?
View 2 Replies View RelatedI just installed Banshee 1.7, now I get this error when I check for updates. It doesn't look like it's affiliated with Banshee but I can't figure out what it's for.
Could not download all repository indexes: Failed to fetch [URL] 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead.
I checked the md5sum of the iso using winMd5Sum utility, it is OK.
To check the CD, right clicked the md5sum file in it, send to winmd5sum, and then copied the corresponding hash from the ubuntuhashes page into the bottom text box, and compared. The message box says md5 sums are different. Now the question is, have I done it correctly, I mean, is this the way to check a burned CD, OR, is there another way to check md5sum of a burned CD?
I was wondering if its possible to see if my ip has been registered under a dynamic dns name? Reverse DNS does not resolve.
View 1 Replies View RelatedWhat would prompt this? i shut off teh computer and turned it back on , didnt press any buttons and it started checking my drives, so i pressed C and cancelled it.
View 1 Replies View RelatedI have an Archos Vision A15VS mp3 player which I am recharging through the usb connection of my laptop. Unfortunately, as far as I can see, there is no way of checking the battery state during the process as the screen of the player only shows a usb icon when the lead is connected.
This means that I don't have a visual confirmation that the battery is actually charging!
Obviously I could simply unmount the device, check the microscopic battery icon on the screen, and if not showing "full" repeat the process.
How do I check if a file is a soft link in the terminal? They're usually color coded, but I gave permissions to a colleague and now every file is green. Is there a simple command for this?
View 3 Replies View RelatedNot sure if this is the right place fo this but....I'm just learning to write bash scripts. I'm experimenting on a ubuntu server 11.04 virtual machine.As part of the script I want to automate user creation.Is there a way to check if a user already exists in a script. so i can do something like
Code:
if userexists; then
do this
else
do this instead
fi
I downloaded GNU coreutils and compiled them both identically on two different computers running Ubuntu 10.04.1 LTS. I performed a random audit, MD5 checking on chown, and they both have different checksums. Does anyone know why this has occurred?
View 6 Replies View RelatedI am having difficulty getting the mailwatch plugin on the Xfce panel to check my Hotmail account.
I've tried:
That didn't work. So I googled it and found:
[url]
I clicked "Advanced" and selected "Use SSL/TLS on alternate port" checked the box, and entered port 995.
That hasn't worked either
I know the plugin itself works. It is checking gmail and comcast with no problem. Does anyone know what I am doing wrong?
I get the pinkish Ubuntu screen and a message such as "checking disk 1 of 4". I assume that it is doing an fsck. However, the time it takes does not seem to relate to the time it takes if I do a manual fsck (almost instantaneous) or fsck -c (several minutes to half an hour depending on the drive). I also wonder what is counts as a "disk". I have in the system:
sda1 - / 20 GB
sda2 - /home 10 GB
sda3 - swap 4 GB
sda4 - /data 115 GB
sdb1 - /quitelarge 750 GB
sdc1 - /veryhuge 1 TB
recommend any utilities that would check the hard drive and its contents (if they are still good) following a power outage?
View 1 Replies View Relatedchecking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details.
View 4 Replies View RelatedI have been trying to fix this problem for 3 days, any ideas before I jump through the window (not the bill gates one)?I am using ubuntu 9.10 and running a ./configure.
View 3 Replies View Related