I have headphones connected via usb and every time I restart computer or disconnect them, my sound output is switched to laptop speakers. Is there a way to make so that every time the headphones are detected, they would be used automatically?
View 1 Replies
I would like to use HDMI on my graphic card for audio output. ALSA shows it as a card with 4 devices and I can get sound through one of them (the other three are different channels, perhaps? I have only stereo output connected). Although Pulseaudio has the right card set as default, it seems to me that it plays on a wrong device. Pacmd shows that the sink has parameter alsa.device set to the first device listed by ALSA, but I can get sound only from the second one.How can I force Pulseaudio to use another device of the same card as a default output?
View 2 Replies View Relatedi downloaded backtrack 4 (final) and booted the iso onto a flash drive using unetbootin. i then changed the boot order so the flash drive was first. after i did that i got into backtrack 4 did the install.sh and now i cant boot windows 7. even after changing the boot order to default, i turn my computer on and get a message that says:
Ubuntu 8.10, kernel 2.6.30.9
Ubuntu 8.10, kernel 2.6.30.9 (recovery mode)
Ubuntu 8.10, memtest86+
Other operating systems :
Memory Test (on /dev/sda1)
Ubuntu 8.10, kernel 2.6.30.9 (on dev/sda1)
Ubuntu 8.10, kernel 2.6.30.9 (recover mode) (on dev/sda1)
Ubuntu 8.10, memtest86+ (on dev/sda1)
[Code]....
i can only boot backtrack 4 OS, i really want to know what can i do to be able to boot my windows 7 home premium os.
I have old app that by default is looking for /dev/dsp as an audio device. The source is configured as such and I want to change that so sound will work on current versions of Fedora.
What is the equivalent of /dev/dsp in F15 ?
I think /dev/dsp was the default generic sound device .. ?
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as:
Vendor: Creative Labs
Model: CA0106 SoundBlaster
Module: snd-ca0106
I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
I recently installed a new sound card, and I need to find out how to change the default device. Currently, I'm dual-booting Windows, and I had re-enabled the on-board audio in the PC's bios. After doing that, Debian started detecting that on-board as the default sound device. Is there a way to set my sound card to be used instead? I found out that the 'alsaconf' utility has been phased out. I"m currently running Debian testing, for amd64.
View 4 Replies View RelatedUsing an external SoundBlaster USB... set as default in Fedora 11's new sound device manager ( neat btw )...works great... except no sound in Firefox / Flash Player.
View 3 Replies View RelatedI have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
I was using ubuntu 10.04 till yesterday.. and due to hdd crash i have changed my hdd.
while looking for my installation disc, my wall-mate gives me this Ubuntu Studio dvd and instead of downloading a new one, i have installed the studio. at the first sight ... i am being a fond of studio version .. its really cool.
now, i am quite habituated with default appearance of ubuntu, i found studio appearance is quite unusual (for me, menu layouts, panel everything).
I would like to know how do i change this default appearance like ubuntu default 10.04 appearance. I am attaching a screen-shoot of my friends desktop, he upgraded his ubuntu thru apptitude update.
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
i mistakenly told ubuntu to start up rhythmbox each time i plugged in my iphone.how do i change the option now that it's set
View 1 Replies View Relatedim looking to allow virtualbox raw disk access to /dev/sdb
currently if i
ls -l /dev/sdb
brw-rw---- 1 root disk 8,2010-01-04 17:00 /dev/sdb
now if i chmod this to 777 or use chown to change the owner this temporarily works but after a few moments it defaults back to its original permissions.
is there a way i can define the permission? i was thinking fstab but i can't have a mount point?
I am using Xampp on ubuntu 10.04 and I have set my document root to a folder in my home directory for ease of use with netbeans. There are several times where I have to manually go and change the permission to 755. If you just place a file in the directory it does not default to 755, seems odd since the document root folder is in my home directory. Chmod works fine but I was wondering is their a way to make all files or folders added to my document root to default to 755?
View 2 Replies View RelatedI'll use i3-wm, just want to know how can I start it instead of gnome using startx.
By the way, where can I get detailed info on X? I am a little confused, don't really understand what startx really starts, what X is and what does it do, how to config.
How do I change the default operating system in Grub? I'm running Ubuntu and Windows 7.
View 3 Replies View RelatedI have a Toshiba NB 205 Netbook. It is currently dual boot with Win 7 and UNR (9.10). The default OS is Win 7. I would like to leave the machine as dual boot, but make UNR the default boot OS, so that I don't have to babysit the machine and choose UNR every time I reboot the machine. BTW, I am delighted with UNR! What a great OS. Really like how it plays so nicely with Firefox. And much faster than Win 7.
View 1 Replies View RelatedI know how to install icons but i do not want to do it that way because almost all of the icons pack out there are incomplete leaving some of my programs with no icons if i install it.
Now i want to use ubuntu icon but i just want to change the icons of the folders only. Can anybody direct me to the folder where the default ubuntu "Humanity" icons are stored?
I only want to replace the humanity folder with the new folder icon which i found.
I've seen previous threads about this, but they're rather old and I can't seem to apply their solution to the latest (10.04) stable release of Ubuntu.
What's the "best" way of changing the default option in the bootloader? I'd rather set it to "Windows 7" for the time being as it's what I use at work.
I am using Ubuntu 10.10. I have a situation to where I need to use synaptic package instead of Ubuntu Software Center. How do I change the default *deb package manager from "Ubuntu Software Center" to "Synaptic Package Manager".
View 3 Replies View RelatedWhen I recently installed a unicode devanagari font (raghindi.ttf), it was set as the default devanagari font. The original one was better. How can i change back?
View 2 Replies View RelatedHow do you switch the default Java environment used from openjdk to sun-java6?
View 6 Replies View RelatedI am using Ubuntu 10.10. I have a situation to where I need to use synaptic package instead of Ubuntu Software Center. How do I change the default *deb package manager from "Ubuntu Software Center" to "Synaptic Package Manager". I have users that are not to cli savvy so I need them to be able to do this in the GUI. I have clients that are having trouble installing a package that hangs because of the installation agreement(terminal window) that has to be answered but because the terminal window is not being displayed, it cannot be viewed it just hangs so I want them to use synaptic manager.
View 13 Replies View RelatedChanging the brightness and keyboard brightness does not give a notification, though the brightness changes. In addition, ejecting a cd, plugging in a usb device, and seeking/playing music gives no notification (though Rhythmbox tells me what track I've skipped to/played). Again, the cd does eject, the usb device can be accessed, etc. I'm not sure if this last one is a problem, but every notification except for the volume one appears about 80 pixels down from the top panel. This 80 pixels below the panel is only ever occupied by the volume notification. Ubuntu 10.04, gnome-power-manager 2.30.0 ubuntu1, notify-osd 0.9.29-0ubuntu2. I'm using a Dell Studio 1555 notebook.
View 3 Replies View RelatedSometimes when I restart, my NTFS drives will mount in incorrect directories. It seems to only happen when I plug in USB devices such as flash drives, and keep them in when I boot. I have the fstab file configured correctly, but it still resorts to some odd default mounting points. Edit suposedly the device name changes whenever I boot with a flash drive plugged in. Is there anyway to mount a disk to a dir without pointing to its changing device name.
View 3 Replies View Relatedrecently I have been trying to create the perfect custom ubuntu .iso to write to a usb drive so i could carry around a live cd version of my current desktop operating system. I have 2 problems...
1: using various tools like Remastersys, Ubuntu Customization Kit, and Ubuntu's own LiveCDCustomization tutorial I have managed to install most of the packages that I want.... Truecrypt is not in the repos and i would very much like it on my custom live cd. while in chroot i tried using wget to download it then extract and install it, but i got a 404 error so it did not seem to be connecting to the place to download it. is there a workaround to getting truecrypt to install into my extracted squashfs? would it be possible to download the packages to my desktop then copy them over to my chroot squashfs to be installed?
2: I have not been able to customize the default appearance of the desktop environment like the background, icons,colors, window border, panels, applets, and so on.... Ubuntu's tutorial states that I need to edit .xmls in /etc/gconf but i do not understand how to edit those to get what I want. LiveCD creates a new user with default settings everytime it is started so its a matter of editing the files that control the settings of a new user.
First of all not sure if this is the correct forum but anyway.Ok well i installed this theme because i liked the look of windows 7 (http://gnome-look.org/content/show.p...content=113264).So i ran the GUIUninstall.sh and it seemed to work but the login screen still has the theme i was wondering how i could change it back to the defualt one.
View 2 Replies View RelatedI'm not sure exactly what happened, but starting a few hours ago, every time i open firefox,the settings have all reverted to the default. I change them back to what i prefer, then when i open it again they are back to the default.
View 4 Replies View Relatedam running 10.10 64bit and I am wanting to change a few wayssome programs start up on boot, they are as follows:1. make NetworkManager not load onboot and require me to manually start it in the command line2. make bluetooth not start on boot and allow to manually start it from the command line3. make networking not boot on startand start manually from command line I have been trying to search on google but most of thereads I find are about removing things completely and the few that werent did not work for what I want to do.
View 8 Replies View Related
