Ubuntu :: Catalyst Control Center - Administrative - Does Not Open
May 30, 2011
I am currently using Xubuntu version 11.04 and I am working with a Radeon HD 4850 graphics card. I am using the proprietary FGLRX drivers from AMD.
I have a small problem. I have two monitors, and in order to tell the computer to use the extra monitor for extra desk space, I have to get into the Administrative CCC. However, when I click on the administrative CCC, nothing happens. It's strange considering that the regular CCC works just fine.
View 1 Replies
ADVERTISEMENT
Mar 26, 2011
Today is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
View 1 Replies
View Related
Feb 10, 2010
I've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
View 4 Replies
View Related
Mar 15, 2010
Catalyst Control Center (CCC) is not saving the changes I make. I saw a couple of thread about this that had links to instructions on how to install CCC, but it still doesn't work for me.
I start CCC with 'sudo amdcccle' and the GUI appears. I can use it to make changes; however, it never saves them. After clicking OK, it instructs me to restart the system. After a reboot all the setting are back to the default.
I have installed CCC three different ways:
1) sudo aptitude install --without-recommends fglrx-amdcccle | tee fglrx-amdcccle.log
2) sudo envyng -t
3) sudo ./ati-driver-installer-10-2-x86.x86_64.run
In all cases, the fglrx driver works, and 'sudo amdcccle' brings up the GUI, but the changes are gone after a reboot.
Hmm, at the moment, when I click "Apply" and the "Do you want to keep these settings?" 15 second countdown box appears, no changes occur even temporarily.
I've tried doing a fresh install of 9.04, then upgraded to 9.10 (I have problems with the 9.10 command line installer not installing grub) among other things.
View 1 Replies
View Related
Nov 19, 2010
Looking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.
View 5 Replies
View Related
Jan 4, 2011
I've got 10.10 up and running like a champ. Haven't done much in it, but all was well. After a little while I went in to turn the cool effects on, and it told me I needed a driver for my ATI card so I said go for it. It ended up putting Catalyst Control Center in for me. That's all fine and dandy except on the windows side I can get into an area that allows me to adjust overscan and turn it off (its a slider for under and overscan).
This version wont seem to let me do that, so now I'm stuck with either NOT a full screen, or no ability to have fun graphic effects. While your here, how can I change the data files which I think ubuntu refers to as your /home folder (documents pictures etc) to a different location? Windows7 and Ubuntu need to see the files in the same places so I don't have to have two working sets of files.
View 1 Replies
View Related
Feb 25, 2011
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+
Motherboard Name Unknown
Motherboard Chipset SiS 761, AMD Hammer
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/09/07)
Display
Video Adapter ATI Radeon HD 4300/4500 Series (512 MB)
Multimedia
Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
View 1 Replies
View Related
Sep 1, 2011
I just did a fresh install of natty, installed a few programs along with the ati catalyst control center.
I am having serious login issues, here is what I do:
I am at the login screen right from start-up, type in username and passward and hit enter, screen goes blank, it appears I am logging in, ubuntu plays a sound and puts me back at the login screen. I do not get an "Authentication Failed" error like I would expect. Unable to login as myself or as root.
However, I am able to login if I select the "safe mode," I am not able to login under the normal mode or the ubuntu classic modes.
I suspect that this issue has to do with the ati proprietary drivers, after playing with the settings for a while in safe mode I am now able to login to the normal natty mode without any apparent issues.
Here is what I changed in ati catalyst control center to boot into natty mode:
I disabled the Xinerama and Tear Free options.
Under the 3D settings, I selected the "override application setting" for all the 3D settings I could.
I believe I still have some display issues as I am unable to drag windows from one display to another, my mouse is able to move just fine across displays though.
I also found that enabling Xinerama prevented me from logging into the ubuntu and ubuntu classic modes, but I was able to login to the ubuntu with no effects mode.
View 3 Replies
View Related
Aug 1, 2010
I finally upgraded from my old Passive Nvidia 6600GT video card to a passive ATI 5750. Using Fedora Core 12, 2.6.32.16-141.fc12.i686, On boot the native driver worked but the card got hot as it was not de-clocking into idle mode like it does under windows 7.
So I reluctantly installed the closed source ATI driver from RPM Fusion
I also added nomodeset to the kernel start-up
Previously I was using the native standard built in Nvidia driver.
The new ATI driver seems to be running with correct entry in Xorg.conf and now it runs very cool at idle just like under windows :-
However the control center will not start...There was a problem initializing Catalyst Control Center Linux edition.
Also some commands using aticonfig return this error...
These libs are on the system in /usr/lib/catalyst
I am also getting video tearing in movies with mplayer and VLC. I have tried the options...
Which added a vsync entry in xorg.conf, but No luck...I think I need to get catalyst control center (amdcccle) running which I has a sync on refresh option radio box that may solve my video issue.
I can live with these errors but the video / movie tearing is a show stopper.
I am getting headache over this trying to find a solution to these issues. ATI and Linux still do not mix well
View 2 Replies
View Related
Oct 20, 2010
I have installed Catalyst 10.10 to Ubuntu 10.10 using the following methodology:
Code:
wget http://someplace/ati-driver-installer-8.783_RC1-x86.x86_64.run
chmod +x ati-driver-installer-8.783_RC1-x86.x86_64.run
[code]....
View 1 Replies
View Related
Dec 16, 2010
Ubuntu 10.10 x64. Got a second monitor and enabled Xinerama. It asked me to restart, I did. I opened ATI Catalyst Control Center after the restart and saw the control panel window open for about half a second before suddenly finding myself at the login screen.
ATI Catalyst Control Center has always seemed to work fine up until I enabled Xinerama. I tried removing the ATI driver, restarting, re-enabling it, restarting, and ATI Catalyst Control Center worked fine again. But, as soon as I enabled Xinerama it went back to logging me out whenever I tried to open the control center. I've tried from the GUI menu as well as the terminal using 'gksudo amdcccle', same result every time.
The dual monitor functionality seems fine, but I need to get back into the control center to adjust the colors. I do a lot of photo editing, and the adjustments in the control center really is a great tool to let me get the colors how I'd like.
View 5 Replies
View Related
Jun 7, 2011
I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.
Xorg.conf:
Section "ServerLayout"
Identifier "Manual Layout"
Screen "Screen-0" 0 0
[Code]...
View 7 Replies
View Related
Apr 25, 2011
I need to invoke the catalyst control panel from Application->System Tools with administrator rights (so i can setup my dual monitor, which for now is in clone mode ) but there is no option to execute amdcccle as root.
I tried to call it from the terminal as amdxdg-su -c amdcccle but with no success. It asks for password and then does nothing.
So i m stuck.i cant setup the screens properly till i can access the CCC with root rights, how can i achive that?
I m using fedora 14 and catalyst ver. 11.2
View 2 Replies
View Related
May 10, 2010
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
View 4 Replies
View Related
Mar 4, 2010
I have downloaded the drives for ATI Radeon X1300 Pro and they will not install. The Catylasy also does not work saying that ATI drivers are not installed. Does anyone know how to get this to work?
View 2 Replies
View Related
Dec 30, 2010
I've download the catalyst center for the 4870x2 from the ati site but how can I install it now?
View 9 Replies
View Related
Aug 21, 2010
I've recently installed Ubuntu 10.04 onto a PC that has a Radeon HD2600 XT graphics card. I tried to install the proprietary driver from the AMD website and from what I can tell, it seemed to work (my xorg.conf file is shown below)
Code:
The problem is that the catalyst control centre does not show up anywhere on the menu bar (such as in system>administration etc.). From advice given on a seperate post (link), I can load up the control centre from typing in a command in terminal, but is there a way to put this in the menu bar?
View 2 Replies
View Related
May 13, 2011
Hardware
HP 8510P
ATI Mobility Radeon HD 2600
Natty Narwhal with Catalyst Control Center for the ATI Radeon and FireGL graphics accelerators is installed.
Version-- 2:8.840-0ubuntu4 (fglrx-amdcccle)
Launching and configuring dual monitor support that connects and expands my Desktop/Workspace when my laptop is docked works fine. However, it does not want to retain the settings after a restart and I am forced to set it each time. Ideas?
View 8 Replies
View Related
Jan 16, 2010
Where is Gnome Control Center. I checked System, Preferences but it is not there
View 1 Replies
View Related
May 16, 2010
I tried adding sample programs to the Control Center by adding them to the Preferences/Administration menu, but that doesn't work. I'm using Lucid Lynx.
View 1 Replies
View Related
Aug 3, 2010
I know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
View 2 Replies
View Related
Jan 16, 2010
Where is Gnome Control Center. I checked System, Preferences but it is not there
View 2 Replies
View Related
Nov 12, 2010
I have a personal laptop and a work laptop. personal is running ubuntu 10.4(which im planning upgrade to 10.10 soon) and Win-Xp on work laptop. I would like to run ubuntu on work machine, but i need to use vmware vsphere client regularly as half my work is related to it.
Is there an alternative available for vmware vsphere client? How can i have ubuntu on work laptop and have access to VMs via the control center? Is running Windows-XP on ubuntu via vitual box a resolution? If yes, I have 3GB of RAM on my work laptop, is that enough?
View 2 Replies
View Related
Mar 19, 2011
I installed OpenSuse 11.4 Gnome on my Toshiba laptop. A couple of things i noticed while trying the live CD first is that the file manager recognized my NTFS partitions and after I installed I expected it to do the same. Also, while installing I thought I selected a secure logon with username & password. After installation it boots right into the desktop GUI. I haven't had a lot of time playing with OpenSuse yet and I have browsed through some threads and I couldn't find a way to configure a secure logon and do I have to mount the Windows partitions in the Command Line or is there a tool I can use in the control center?
View 7 Replies
View Related
Nov 16, 2009
when running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
View 2 Replies
View Related
Jul 20, 2010
I'd like to combine the gnome-main-menu and control center windows into one window.by default the gnome-main-menu closes by after you choose an application, the control center does not.I use docky and if I could combine the two windows I'd have one less icon on the dock.I'm also open to alternative menus. preferably that work with docky. gnomenu isn't my fav but I haven't tried many others.[URL]
View 1 Replies
View Related
Jan 27, 2011
I was just wondering if there are any applications that would serve as a webcam manager in Ubuntu. I am running 64 bit Ubuntu 10.10 on a Dell XPS M1530. Under Windows, I was able to modify camera settings (resolution, image, special effects) from a dedicated panel any time the camera was on. I don't need a lot of flashy features, but it would be nice if I could lower the resolution so that Skype runs more smoothly.
View 4 Replies
View Related
Mar 2, 2010
So after playing around working out how to install the latest ATI drivers as super user and finally getting it done, I restarted my computer to find out that the CCC wont open.If I run the basic version nothing happens, if I run advanced it asks for password then does nothing.
View 2 Replies
View Related
Feb 18, 2010
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
View 5 Replies
View Related
Mar 4, 2010
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
View 2 Replies
View Related
