I have a fresh installation of Fedora14_x64 and after that I have updated the OS also.
Then I have installed VMware-Player-3.1.2-301548.x86_64.
All the installation procedure has completed successfully without any error.
But when I am going to run VMWare It is throwing some error.
I am attaching all the needed screenshot and log file also.
when i try and run the latest vmware workstation, i get an error at compiling virtual machine monitor it says: Unable to build kernel module. See log file /tmp/vmware-root/setup-7625.log for details. When i try and go to the folder vmware-root it says i do not have the required permissions. I'm on the latest 11.04, i really need this working.
View 2 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View RelatedI was trying to install vmware player 3.0 and it prompt that it require the kernel kernel-2.6.35.6-45.fc14.i686 to be compile before it start.
Quote:
Kernel headers for version 2.6.35.6-45.fc14.i686 were not found. If you
I try following but unable to find.
Code:
Nothing to do
Code:
Code:
Then I try to map to the file, but not working.
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
I started slax in cli mode and tried to install nvidia driver before running X but it won't install. My log:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Jan 10 04:21:14 2010
option status:
license pre-accepted : false
Update : false
Force update : false
Expert : false
uninstall : false
Driver info : false ....
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details.
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
I recently started to use Ubuntu in VWware player on my windows-XP. I installed ubuntu 10.04 few days ago, It was working fine.
Yesterday, I compile a new kernel, kernel 2.6.33 in my vmware ubuntu 10.04. Everything went well till I did reboot. before reboot I use the command "update-grub" to make it compatible to the new kernel. BUT... after rebooting, I have a problem in loading a grub correctly. it gives me following message " [2.149136 ]kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)" and I can not proceed further. I have my all data on it. I also tried to boot it from live CD but unfortunately, I can't mount the hard disk on it in order to get those data from my old Ubuntu set up.
System. fedora 15, fully updated Kernel 2.6.40-4.fc15.X86_64
64 bit. Gnome 3
The other day I installed VMware Player on the system when the Kernel was 2.6.38.8-32.fc15.x86_64. On running VMware player after installing the kernel-headers and gcc files the program ran fine (I did not try to install the VMware Tools). I also have not loaded the guess OS as yet.
toady I did and update in which the kernel was updated. I checked to ensure the Kernel-headers were also updated for the latest kernel.
After rebooting the machine the running kernel was then 2.6.40-4.fc15.x86_64. I then tried to start VMware Player. It indicated because the kernel was changed it needed to install new kernel modules, OK, It open the module screen and then crashed.
The log says it can not compile Vmmon which is the first module. it does not go any further.
Tried to installed a new copy of VMware Player over the old one but this only resulted in the same error messages.
Any ideas on how to fix this.
I am using the 13.1 build scripts from slackbuilds.org. I modified the scripts to build 3.2.12 rather than 3.2.10.
In 13.1 the main VirtualBox 3.2.12 OSE package built and installed without errors. The VirtualBox GUI starts without errors.
Running the virtualbox-kernel-mksrctarball.sh script built a kernel source package without errors.
Yet the VirtualBox kernel module won't build. I receive the following error:
Code:
]*** Building 'vboxdrv' module ***
make[1]: Entering directory `/dev/shm/virtualbox-kernel-3.2.12/vboxdrv'
make KBUILD_VERBOSE= -C /lib/modules/2.6.33.11-smp-2/build SUBDIRS=/dev/shm/virtualbox-kernel-3.2.12/vboxdrv SRCROOT=/dev/shm/virtualbox-kernel-3.2.12/vboxdrv modules
[Code].....
Since new kernel 3.0 update I cannot rebuild vmware modules
Quote:
sudo vmware-modconfig --console --install-all Unable to initialize kernel module configuration
how to do that. Where do I insert the "CONFIG_LOCALVERSION" line.
Quote:
Same here. This seems to be due to the kernel version being "3.0" instead of "3.0.0". Recompiling the Kernel (and all modules based on it, e.g. nvidia) with
CONFIG_LOCALVERSION=".0-ARCH" allows me to compile the modules and run VMware.
I can't get the nVidia kernel module built. Each time DKMS runs to install it (I'm trying to install it with the nvidia-kernel-legacy-173xx-dkms package on ), the build fails with a different error. Here is an exemple /var/lib/dkms/nvidia/173.14.27/build/make.log (I have a geForce FX 5200 on the computer I'm trying to install the nVidia driver):
DKMS make.log for nvidia-173.14.27 for kernel 2.6.32-5-686 (i686)
dimanche 24 avril 2011, 17:28:09 (UTC+0200)
make: entrant dans le r©pertoire /var/lib/dkms/nvidia/173.14.27/build
[code]....
That's it guys. I have successfully installed the proprietary ati drivers in past 6.34 and 6.35 kernels but not in latest .6.36. I'm wondering if this have something to do with compatibility or not.
Installation log shows me some errors I can't recognize:
Code:
I'm trying to debug a module I programmed but I don't want to do it on the running host but against UML (don't want to reboot every 5 minutes).
The UML kernel I downloaded is 2.6.38.2. I have already downloaded the ubuntu kernel headers for this version (they belong to natty though I'm running maverick.... when I installed the .deb file with dpkg I had no problem at all).
Now I'd like to build said module against these headers. How can I do it?
Here's the makefile for my module code...
I had an issue with the module build for vbox 3.1.2 breaking on the latest kernel ( /etc/rc.d/rc.vboxdrv setup ). Apparently the issue is that a kernel header (autoconf.h ) has changed its location in the module tree and hence the issue.
2 options:
1. upgrade to 3.1.4
2. create a symlink as follows
cd /usr/src/linux/include/linux
ln -s ../generated/autoconf.h autoconf.h
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
i am using Ubuntu 8.10 inside VMWare Workstation 6.i need to use folder sharing feature with my host OS XP2 but when i tried installing VMWareTools i cant build several modules including vmhgfs and vmblock.Code:Trying to find a suitable vmhgfs module for your running kernel.None of the pre-built vmhgfs modules for VMware Tools is suitable for yourrunning kernel. Do you want this program to try to build the vmhgfs module foryour system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmhgfs module.
View 1 Replies View RelatedI am trying to install atheros AR5007EG on my toshiba laptop -i figured out that best way to install this wireless card is through madwifi -while configuring madwifi i get this error
I am posting the output of different commands so you can understand better -i manually tried to link the build directories to kernel-source which failed - i am not sure exactly what kernel source is and how i can link to kernel source -
My output:
I am using ubuntu 9.10 and the vmware player 3 was working fine. But after the kernel headers updated to 2.6.31-22 the vmware player shows the pop up and says it cannot find the kernel headers. But actually, the linux-headers-2.6.31-22-generic are installed. I tried to re-install the vmware player but with no sucess. Is there any way to correct this error.
View 2 Replies View RelatedI've just upgraded to Ubuntu 10.010 - Maverick Meerkat.
Launching VMWare Player 3.1.2 I get the message: "Before you can run VMWare, several modules must be compiled and loaded into running kernel".
I click ok, but there are problems recompiling VMCI sockets.
The effect is that my windows image starts, but then crashes.
Do you have some suggestions to solve the problem ? Or is it only a problem of compilation with the new 10.10 kernel, not yet available for VMWare?
I installed VMWare WorkStation 7.x.x . When It started that I have taken "Kernel Header" error and It want to enter path of Kernel. I tried many commands ;
yum -y gcc kernel header
uname -r
2.6.18-238.19.1.el5xen
rpm -qa kernel-devel
kernel-devel-2.6.18-238.19.1.el5
Actually, It uses same kernel but VMWare is not working. I searched about Kernel Headers error when run VMWare on Internet. But I couldn't solve my problem.
I'm using VMWare Workstation 7.0.1 on my F12 x64 System with a self-made Kernel 2.6.32-7.The last days everything went fine, but since todays morning i can't run VMWare anymore.It tells me, that there are no Modules for my Kernel and when i try to build them i get the following error:
Code:
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmmon-only'
[code]....
I am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it:
1. Set Up an RPM Build Environment as its is explained in [URL]
2. Then follow the instructions in [URL]
3. When I try to install the kernel source rpm I get the following error:
[matias@Centos ~]$ rpm -i [URL
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root . . .
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read
I have tried installing Vmware-Server 1.0.10 on Fedora Core 12. After installing all packages it fails on building the vmmon module. In the internet i found many patches and vmware-any-any-updates...but nothing worked. My Kernel Vresion is 2.6.31.12-174.2.3.fc12.i686.PAE...
View 2 Replies View RelatedSince installing Fedora 14, I have found that everytime I run Vmware player it goes through the compile sequence. It works fine after that. It should only compile if the kernel has changed. Anyone else with this problem? Any ideas what is wrong?
View 5 Replies View RelatedI'm unable to boot the LFS-6.6 which i've built on a vmware workstation 6.5. i had no trouble in installing all the packages and have managed to run all the test suites successfully w.r.t stable LFS-6.6. while booting i get 'kernel panic' and it says unknown device /dev/sda1 and unknow block (0,0). i've only one primary partition without any swap partition. i've a label assigned to /dev/sda1 and have included it in my fstab file. device.map shows 2 entries:
One for the floppy and the other for my harddisk which is- hd0 /dev/sda. this is for the 2nd time i'm stuck at a point after perfectly installing all the stuff as mentioned in the LFS-6.6 book. i've also noticed on this website the many users have similar type of issue. it would be great if somebody could help me.
note: while configuring the linux, i've inbuilt everything required for my system, including support for ramfs and other required filesystems, scsi driver etc.
My host machine is on a intel core 2 duo processor. my virtual scsi hard disk is 3 GB in size and is a ext3 fs. scsi is configured with LSI Logic which is recommended by vmware while adding an hard-disk.
I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
djmack-5/19/2011-I have purchased an ASUS K52J (intel i7) laptop. I have installed Centos 5.5 (64 bit) from CDs. The I got all the updates and it's now up to 5.6. I have two problems.
(problem-1) - Using the GUI (System->Administration->Hardware) I can get to a Device Manager screen. It shows a JMC250 PCI Express Gigabit Ethernet Controller. Using the GUI (System->Administration->Network) I can only see the wireless (wlan0) as configured and active. The ethernet card is not seen as ether 0. I've seen there are downloads to solve this problem, however I've been 100% unable to do and or understand them. I don't know how to build the kernel and I don't have any source code. I only have the binaries (I think). Is there a version of the kernel that I can put on CDs that has understanding of the ether card I referenced above?
P.S. I've downloaded a binary fix and it says it needs 20 or so dependencies (I have zero idea how to get those).
P.S. I've downloaded a source fix and I couldn't get it to install (I'm not a linux kernel build knowlegable person). I don't have the source either.
(problem-2):As stated above I need direct (RJ45) access to the laptop. I currently have the wireless card working but I have no idea how to get this to work with httpd, ssh, scp.I can access things via a web browser right on the laptop. I cannot access this laptop via a web browser from any other box. I cannot access this box via ssh or scp.I disabled the firewall and I disabled the SELinux security.I am stumped as to why I cannot see this ASUS laptop via httpd and/or ssh/scp.I can ssh and scp to other linux servers but these servers cannot ssh or scp into this laptop.
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
[Code]...
I tried installing VMWare-player using
Code:
#./VMware-Player-3.1.2-301548.i386.bundle
It got installed successfully, but while running it said gcc not found. so i installed gcc by
Code:
#yum install gcc
[Code]....