I'm running Xubuntu 10.04 and if I am in the detailed view mode with Thunar eventually I will be unable to highlight, select, or take any actions to any item on the list until I switch to another view and back again
View 2 Replieswe are in a place where we have to give an account (with sudo access...) to a user we don't completely trust (I am reminded of this comic). What we need to set up is some way of logging pretty much everything that this user does, especially what he does as root (via sudo or sudo -s). Now, I know that anything we do can easily be undone by another user with root access, but we feel that if he does disable logging we can use this as a really good excuse to revoke his access. So, does anyone know what logging stuff I'd have to set up to completely monitor one user (it is ok if we are monitoring everyone, but we'd prefer to watch one user if possible)?
View 9 Replies View RelatedI know I can do a dpkg --get-selections to get a list of installed packages. Is there a way to get the version of the package listed as well?
View 1 Replies View RelatedI know that there was some shortcut to see detailed boot process, hardware information. I think it was 'R' but I'm not sure.(I know that I could also remove 'quite' option but this is not the case like also virtual consoles. I'm looking for this particular shortcut and some information what it actually does)
View 2 Replies View RelatedAfter the latest yum updating, yum hides detailed info about what it will do when it work. Previous version of yum will list the packages to be updated, installed, or deleted, and then ask you if it is what you want; this updated yum show nothing but "Are you sure?"( or something equivalent ): you don't know what it will do at all! Seems you have type "y" and see what it will download and install or uninstall. I don't know if new yum has changed its notice method or if I need add some plug-ins for it to show me those info as it did.
View 5 Replies View RelatedHow do I setup some more detailed effects in gnome? In the menu "System / Preferences / Desktop Effects" There are few options. I wanted to be able to do more settings, and you can do in KDE. How would I do that?
View 1 Replies View RelatedIs there a utility that can be used to view file information about a video file? Example: if the file was encoded with ffmpeg, and if it is H.264. In addition, what type of encoder was used for audio?
View 2 Replies View RelatedHow can I find the detailed specifications of my hard drive? I installed VMware player and created a Win7 VM guest.Performance is pretty bad.Heard that VMware player is not built for SATA drives, but I don't know what type I haveAm interested in using VirtualBox, because it has support for SATA drives, but, again, I am not sure what type of drive I have. Just need to know the specs on my hard drive so I know what type of VM software to install/run/enjoy
View 14 Replies View Related[URL] .and-installing
try to install and give a detailed documentation or screencast.
I currently have a personal use server setup in my home and would like to be able to send emails from my domain name.
At&t blocks the standard ports used so some form of forwarding would have to be used. I've looked at other guides and followed them to the key but it appears I'm always missing something.
So my question here is could anyone write a detailed guide from start to finish on how to install a postfix server behind an at&t connection complete with MX record and firewall configuration information?
I have a working build of crosstool - it was built for gcc 3.4.3 using glibc 2.3.5 going from 32-bit x86 linux to 64-bit alpha linux. As far as I can tell -- it compiles correctly (output of alpha emulation matches expected) but it has a major flaw. When I use the cross compiler and attempt to add detailed debug information, it compiles, but does not have the debug information. For example, when I execute:
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -g -o hello main.c
OR
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -gstabs -o hello main.c
I get a working alpha binary for hello world. BUT - when I run objdump - this is what I get
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump -g hello
hello: file format elf64-alpha
/home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump: hello: no recognized debugging information
Frustratingly - if I use my x86 gcc version 3.4.6 to do the compilation (same arguments, just using the x86 compiler, not the cross compiler) - it correctly embeds the debug information.
i am looking for a detailed description of the login process for both root and normal user , also locally and remotely.i read some sentences that the files .bashrc and bash_profile are needed for this process. But that was very concise.
View 9 Replies View RelatedBelow is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
Does anyone know or have a book on the advanced uses of kickstart and its deployment methods? I have a challenge and its to: Write a report with a full and detailed analysis of the two methods,(remote installation methods of linux and windows) their differences, and a comparison of features and performance.
I am also going to have two servers (one Windows one Linux)thay deploy a virtual network of VMs with different scopes and policies. What can i really do to go beyond the scopes and policies?
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedI ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedMy linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedI was reading about ext3 feature and I have read about its journaling modes. I would like to ask what is the default journaling mode of ext3 fs in slackware(or is it in all distro using ext3)? I'll install slackware when my new pc arrive and the fs I will use will be ext3 and I like it to have data=journal mode for its journaling. I have read in some wiki how to set the journaling mode into data=journal mode.
Code: # tune2fs -O has_journal -o journal_data /dev/sdXY Do i need to issue this command or is this the default mode in ext3 in slackware?
I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
I need boot in emergency mode (not single user mode), from docs:
[URL]
in red hat enterprise 5 it's ok, not in red hat 6.
I have asked this question several times but I think that I am not asking it correctly. I have umbutu 9.04 and Windows 7.0 on my C: drive. When I start my machine I have approximately 9 or 10 items on my boot list and I would like to have 2.It has been suggested that I determine what version of grub I am using and I am using /boot/vmlinuz-2.6.28-19 generic. I have no idea what that means.It has been suggested that I install some various items of software and I am sure that it would solve my problem but to me it would be like looking down a cows throat. Please, don't get me wrong, I really appreciate the input but its like when you go to the doctor you kind of wonder "just what the heck is he talking about". Maybe someone could just tell me how to accomplish what I want to do so I can understand!My daughter uses this machine and she goes to places that I didn't know I had.
View 7 Replies View RelatedI am missing the are on the top bar that u can click on to get to chat and email and inbox and compose a message it just went missing all of a sudden and it was a super help to have because im always sending mail and getting chats and now i can look at picture.
View 9 Replies View Relatedi can't seem to move around applets along the top panel. everything seems strangely fixed ever since i upgraded to lucid.
View 6 Replies View RelatedSo I have virtualbox with a fresh install of Windows XP running in it (no service packs) and when I plug in a USB Item it shows up on the device list and it is not greyed out, but nothing happens I cannot access the device through windows XP. It was greyed out before but then I logged in as root and started virtual box and it is not greyed out anymore but nothing happens when I plug in a USB item.
View 5 Replies View Related