I am trying to publish my key to a key server by typing,
Code:
gpg --list-keys
into terminal.
According to LaunchPad the output should say something like,
Code:
pub 1024D/12345678 2007-01-26
uid Geoffrey Hayes (My OpenPGP key) <geoffrey@bungle.com>
sub 2048g/9ABCDEF1 2007-01-26
how to make creative web cam working with ubuntu
View 1 Replies View RelatedI wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedWhen I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedI just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
I am trying to configure evolution to work with MS Exchange but cannot get it to work. I also have an android phone which is dead easy to configure, but I've tried so may settings but cannot get evolution to connect. Anyone also having had this problem and finally solved it? I also tried DavMail with no luck.
View 6 Replies View RelatedIf I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies View RelatedI have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View RelatedI have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies View RelatedI am trying to set up an unused machine as a web server for my students.
I originaly tried with Redhat 9 and had the same problems. I am using an HP Pentium 4 system with 2 network cards.
1) The built in Realtek RTL8139 configured as eth0.
2) An add in Broadcom BCM5782 Gigabit card that was added I presume when the built in card failed (we have a number of machines like this around the school), configured as eth1.
I did not realize the second card was installed when I had Red hat 9 on the system, but I discovered it after installing centos 5.5. I have tried to configure the system to use DHCP with and without getting the DNS from the provider, and both ways the system complains that there is no connection, check the cable, so it will not activate the device.
When I configure the device to use a fixed IP, I can configure the device, but I can't ping anything on the network other than myself. I suppose it is possible that both network cards have failed, but I get green link lights with both cards, when I connect them to my router, so I am at a loss as to why neither board seems to work. I don't have a spare network card to slide in because the computer takes a special mini card. Is there an easy way to test the board to see if the board is a problem?
i have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedI just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies View RelatedWhat used to work flawlessly in F14 now does not work in F15. I have done a fresh installation of F15 and all seemed to go well other than a few minor tweaks. In F14 I had an /etc/fstab file that worked well but in F15 does not work. I have 3 external USB drives, mybook, black & StoreIt. With F14 my fstab worked very well and booted regardless of weather or not any particular drive was connected at any given time. Typically I have the mybook and black connected at home and the StoreIt connected at work, but regardless it would boot and work without any problems.
[Code]...
I'm trying to get sendmail to work with php but i can't even seem to get it to work on it's own. I'm logged in as root (su root). I have in php.ini: commented out smpt and smtp port (win 32 only it says) and sendmail_from commented out
For unix only
sendmail_path=/usr/lib/sendmail
sendmail seems to be installed i can run it from bash. I try sending an email using:
sendmail example@whatever.com
message
ctrl + D
which i saw somewhere however the email doesn't seem to go through. I've also tried (after restarting apache server) to use mail() php function and that also doesn't work. Any ideas?
As far as I can tell, I have all the applicable applications and plugins (for this, Debian 5.0.6 installation). I type in Code:about:plugins in either iceweasel or epiphany browser and get a list that includes:
Code:
Installed plugins
Find more information about browser plugins at mozilla.org.
[code]...
Lucid on desktop. I'm interested in using U1, but have had no success getting it to work.
Tomboy notes: Telling me they are synchronized, but they are not.
I've installed several ftp clients available through the software center. I'm able to connect to my remote host and view directories, but for some reason every time I try to download my files/directories, it disconnects and doesn't help me at all. I've got a large remote site so I can't feasibly download each file through my file manager.
Does anybody have any suggestions to get an ftp client working on my computer?
The gpg key fix did not work for me. I have tried so many things including reinstalling 3 times.I am totally new to Ubuntu and Linux so at this point.
View 1 Replies View RelatedI have an IBM t30 laptop, which works fairly well under Windows XP, but I wanted to install Ubuntu 10.04, or similar. I have gone through the usual installation setup but when it finally gets to the normal screen its all bitty and broken up. The next problem is that I cannot get internet connection for more than a few minutes before it disconnects and I have to re-boot, time and time again to get any internet access whatsoever. When clicking Mozilla Firefox, the screen freezes and that's it - I get no further. I have re-installed Win XP for the time being so that I can access the internet, and this forum, but I am hoping someone can offer a solution before I try again?
View 7 Replies View RelatedI can not get pSX to work. It comes up to the main menu with memory card and CD player but whenever I try to open a .cue file it says Error CD not usable: Failed to open file.
View 1 Replies View RelatedI tried to install Tor on my computer running Ubuntu 11.04, and when I try to run Tor I keep getting the same error message. While I would like to go to the support forums for Tor...I couldn't find any and figured this would be a good option since I'm trying to run Tor in Ubuntu....the error message I keep getting basically says that it can't listen in on port 127:0:0:1:9050 and then asks if Tor is already running which I know it isn't..
View 9 Replies View RelatedBus 001 Device 003: ID 03f0:9207 Hewlett-Packard problem is is there doesnt seem to be inf file for wrapper windows installs it and has a .sys driver file also install cd is exe application no .inf file on cd
View 3 Replies View RelatedI'm new to Ubuntu and linux.I've altered the partition on my hard drive. Won't boot into windows. Do not have internet. Heard that testdisk should help. I have downloaded some testdisk files to a usb flash drive via another computer.Have ubuntu 9.10 DVD, so can use this.Step by step, how do I get testdisk to work?
View 9 Replies View RelatedI've been trying to accomplish this on my own, but I can't seem to figure it out...
All I'm trying to do (for learning purposes) is to get a message to print out to a log file every 5 minutes.
This is on Ubuntu Server 6.06.
Logged in as root ( I know, I know, should have sudo'd, oh well... )
Created a new file with this in it:
Code:
Added this line:
Code:
( I wasn't sure the proper command to try every 5 minutes, but this is my latest iteration. I also started with just */5, and that didn't seem to work either. )
Saved and exited crontab.
Console reports:
Quote:
Using command: ps -ef | grep cron
Quote:
So I waited 10 minutes to be safe.... and saw no log file appear.
I checked this page here: [url]
I wasn't sure what it meant by the PATH= variable they wanted me to set, my /etc/crontab file states:
Code:
But I didn't know if it meant there, or in my crontab -e location, so after the first failed attempt, I added the line from that webpage as well to crontab -e:
Code:
Waited another 10 minutes to be safe, still nothing.
I've got Ubuntu 9.10 installed on my Macbook Pro 5,5 and everything is working... I decided to install the Kubuntu desktop package along side gnome and when I boot into KDE, wireless does not work. Its not picking up on any networks even though wireless is checked as active.
View 5 Replies View RelatedLet me first start by introducing myself. I'm completely new to Linux. I've always argued Windows was better, even if I secretly thought not. Anyways the time has come to make the transition (I'm moving into computer forensics so I need to learn linux )
SO i'm trying to use crontab -e. I've installed gnome scheduler as I'm not comfortable editing in command line yet.
I've setup blackjack to start everyday at 23.30. The command line I've entered is /usr/games/blackjack and this works perfectly fine in command line.