Ubuntu :: Can't Get 1280x1024 Screen Resolution
Dec 14, 2010
I just want my normal settings back. I deleted the original post because I really screwed something up and I have to use Windows until I can figure out how to fix it. Forget about my resolution preferences. My Linux boot is stuck in low-graphics mode
Would anyone be able to provide me step by step, easy to follow for a newb instructions on fixing my boot?
I have to use recovery mode to load any graphics at all, and it's stuck in low graphics mode and I can't change it. More info below.
View 5 Replies
ADVERTISEMENT
Jun 20, 2010
Yesterday I installed ubuntu 10.04 LTS, it allow me only 800x600, 640x480 and 400x300 screen resolution, how can i set 1280x1024 ?
View 9 Replies
View Related
Mar 27, 2011
I'm new to Ubuntu, just installed it today as my Windows 7 got corrupted and couldn't boot. So far it's great, but I have on issue. My monitor is unrecognized, and I can't go to 1280x1024 resolution at all. I only have these options:
640x480 4:3
848x480 16:9
800x600 4:3
1024x768 4:3
1360x768 16:9
I have an HP Compaq dx2200 I have a Viewsonic VA 702b Monitor Did all possible update, no help. Even tried to use the "additional drivers" option and none were shown.
View 4 Replies
View Related
Dec 25, 2010
I am getting a screen resolution of 1280x1024 on my laptop, but I sometimes like the lower resolutions, which are unaccessible via the Screen Resolution program.
View 2 Replies
View Related
Apr 5, 2011
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
Dec 21, 2010
I need to set my resolution to 1280x1024. Problem is, that the NVIDIA X Server Settings does not display such a resolution and I want to use that! My monitor is an LCD capable of upto 1280x1024 75HZ resolution. I'm using Ubuntu 10.10. I did the xrandr command to check what resolutions are available and its output was:
Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0 60.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0
640x480 56.0
512x384 57.0
400x300 58.0
320x240 59.0
In NVIDIA X Server Settings, the list of available resolutions are:
(all of the above)
1152x864
1360x768
I have NVIDIA GeForce 9500GT.
View 9 Replies
View Related
Jul 13, 2010
I'm a first timer on Ubuntu and I have a little problem with my Nvidia graphic card. After lots of attempts I can't get the 1280x1024 resolution that both of my monitors have. Instead I'm running on 1024x768.Is this a way to fix it?
View 8 Replies
View Related
Jun 7, 2010
I have Ubuntu 10.04 32bit installed on my desktop. My video card is an nVidia 7800 GT. My Monitor is a Sceptre X24WG. I am able to use the NVIDIA X Server Settings utility to change my resolution to 1920x1080 as well as 1920x1200,and 3d opengl accelerated games work. When i reboot, the x server comes up with 1280x1024 as the resolution. I want it to remember the resolution i selected instead of defaulting to a different resolution.
I was running Kubuntu 8.10 previously and had some difficulty setting up the graphics initially, but i don't recall what steps i had taken to get it to work. When i recently reformatted to install Ubuntu 10.04, it wouldn't go directly to 10.04. The screen would go to a garbled display and would load the install window, so i installed 9.04 and then upgraded to 9.10 and then 10.04, without trouble.
I'm using the nVidia hardware driver version 195.36.15, which in the hardware drivers utility is listed as the current and recommended version. It originally wouldn't install until after i had rebooted into the 2.6.31-21 kernel. I have tried the option to save to x configuration file. When i save to x configuration file, the xorg.conf in /etc/X11/ looks like this:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
# xorg.conf (X.Org X Window System server configuration file)
[Code]...
View 2 Replies
View Related
May 1, 2010
Before I upgrade to 10.4 It would be nice to find the best solution to this problem. I use a KVM switch that dont pass the EDID info from the screen to the OS. To solve this, that is, to get the correct screen resolution, i need to pass monitor and screen info to the OS at every startup. One way is to ad a script to /etc/gdm/init/default, or in KDE /etc/kde4/kdm/Xsetup.
View 2 Replies
View Related
Aug 27, 2011
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
View 2 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
May 13, 2010
First the Hardware:
- Celeron 500mhz with 256megs or RAM
- S3Virge DX Card with 4megs of RAM in a PCI slot
- Envision EN9410e LCD with native resolution of 1280x1024
- Sidux distro running (Debian Sid)
Things I have tried:
1. Without any post install configuration: GDM and XFCE booted up with an 800x600 screen size. Looks great, but size is too small would like the native resolution of 1280x1024.
2. Created a xorg.conf file with the command "Xorg -configure". First added the horizSync rates and the VertRefresh rates. File had "s3virge" as the driver listed for the card. Screen section I added under 16 depth and 24 depth the Modes "1280x1024". This results in GDM starting with colors all messed up in vertical lines and barely able to read the screen details. The resolution is correct, but the colors are completely messed up making it hard to read anything with vertical lines running through everything.
3. Changed the above xorg.conf file to use the "vesa" driver. GDM starts up in 1280x1024 and the colors look perfect, but when I log into XFCE it bombs out when the desktop appears and takes me back to the GDM log in page, never letting me run the XFCE desktop.
4. Ran an old Knoppix 5.1 CD and it configured a beautiful desktop with I believe a 1024x768 desktop and great colors. It looked like it was using the vesa driver when I looked at the XFree86 config file.
5. Ran ddcprobe and it identified the "vesa" driver with the S3virge DX card and showed the possible resolutions which included 1280x1024x32k and 1280x1024x64k. Once again leading me to believe that it should be possible to use this card with this monitor and use the monitor's native resolution of 1280x1024.
Any ideas what I could do to get this resolution or is it just impossible with this hardware? Do I have to settle with 800x600? #3 try boggles my mind because I can't figure out why GDM would look perfect but then it would bomb back to the GDM screen instead of starting XFCE.
View 4 Replies
View Related
Aug 25, 2010
i just installed 10.04.1 and have done a quick apt-get update/apt-get upgrade.the problem is i'm running a 1920 x 1080 display using a geforce gtx460, yet the screen is cropped in at 1280 x 1024. i have the option to go lower only.i first tried to install the nvidia binary in the old-fashioned way of (system > administration > hardware drivers) but this reported that there are no proprietary drivers in use and there was no option to 'switch one on'.i guess my hardware is too new so i want to install the drivers available at nvidia's website (256.44). this adds support for my gpu.
i tried to install these by exiting x but this just resulted in some sort of system hang. the function keys on my keyboard seem to be 'non-functional' too, making a ctrl+alt+f1 not do what it should. i think this may be a problem with the mac keyboard i'm using.is this just a waiting game? can i get into a virtual console somehow else (perhaps during bootup)? is there a way i can exit x without the system hang? is there another way of installing some workable drivers? should i be altering my xorg.conf?
View 4 Replies
View Related
Oct 18, 2010
I have a custom PC with a (nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)) graphics card and a 17" Compaq MV720 CRT monitor. My graphics card/monitor combination is capable of resolutions up to 1280 X 1024.
I just installed Ubuntu 10.10 64Bit, and the highest resolution available at Sysytem>Preferences>Monitors>Resolution: is 1024 X 768. I want to get the resolution up to 1152 X 864, which the card/monitor is capable of. I looked around the forum for a solution, but couldn't find a thread that explains exactly what I want to do. In the most previous version of Ubuntu that I used (9.10), I could generate an xorg.conf with Xorg, grab the (Monitor, Device, and Screen) sections, and use that with a few changes to create an xorg.conf to get the resolutions that I wanted. In 10.10, that no longer works. In fact, it won't even work without the changes. After placing the xorg.conf in /etc/X11, the PC will only boot up to a text CLI prompt to login. No GUI desktop.
My PC is a totally orthodox desktop, no dual boot, no Virtualbox. What do I have to do to get the resolutions above 1024 X 768?
View 4 Replies
View Related
Mar 9, 2011
I've installed Ubuntu 10.10 on my laptop, only to find I only have low resolution problem. I got my system info and it's:
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
All the tutorials tell me to try and use xorg, with commands like:
Edit /etc/X11/xorg.conf but I always get a response of
Command 'edit' from package 'mime-support' (main)
Edit: command not found
View 3 Replies
View Related
Nov 22, 2010
I have installed ubuntu 10.10 yesterday, but couldnt find any option to set screen resolution , from where to set it ?
View 4 Replies
View Related
Apr 2, 2010
I'm having problems adjusting my screen resolution. I'm using Nvidia Geforce FX5300 video card and Samsung T220P LCD screen with resolution of 1920x1200. After installing the Nvidia driver I went to system -> preferences -> display in order to change the resolution to 1920x1200. Unfortunately, the available resolutions were only 640x480 and 320x240. I tried to set the resolution manually, using the advanced button, but when I did this everything was extremely big on my screen.
View 1 Replies
View Related
Apr 13, 2010
I am running Ubuntu 9.10 on Intel(R) Celeron(R) CPU 570 @ 2.26GHz SIS 771/671 PCIE VGA
have even tried changing xorg.conf
View 1 Replies
View Related
May 14, 2010
How can I change screen resolution?
View 4 Replies
View Related
Jun 15, 2010
By default, ubuntu is using an incompatible resolution for my monitor. It happens while booting and logging in. It is due to it using a Hz setting to high for the monitor.What can I do to fix this?
View 1 Replies
View Related
Aug 10, 2010
I'm very new to Ubuntu and have 9.04 running on a Sony Vaio, don't know what graphics card I have. My screen resolution doesn't have an option higher than 800x600, so everything looks super zoomed in. Other threads tell me to edit xorg.conf, which I did (probably incorrectly). The result was the computer had mega problems when I restarted it, and when it finally got back to the desktop it didn't give me any other options for screen resolution. Also it says I'm in low graphics mode.
View 1 Replies
View Related
Oct 28, 2010
On last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies
View Related
Feb 14, 2011
I recently upgraded my desktop pc from 10.04 to 10.10 and ran into a tad of trouble. After I attempted to login from the GDM, something caused the system to crash and return to the GDM. So, I got my laptop out, did some googling, and decided to delete ~/.config/monitors.xml to try and reset the resolution. That got me to the Desktop, at which point I was greeted by more display issues.
The point at which the computer normally goes idle seems to crash and return it to the GDM as well. Needless to say, I disabled the idling/password prompt setting to prevent crashes every five minutes. Anyway, the prevailing problem is that I can't change the resolution itself -- as that seems to cause the same issue.
View 3 Replies
View Related
Mar 13, 2011
I've recently installed Ubuntu 10.10 on an old Dell computer I have. Everything seems to work fine, but I can't seem to change the screen resolution. In the monitor Preferences it says Monitor:Unknown. It's stuck on 1600x1200 and I'd like it to be closer to 1024x768
I've tried changing the xorg.conf file to no avail. I've been browsing for 3 days now looking for a solution.
[URL] These are my specs if it helps any, ignore the windows installation info because I have it installed alongside ubuntu.
View 9 Replies
View Related
Apr 1, 2011
I cannot get my screen resolution to change from 1600x1200. This is a new install of Ubuntu 10.10 and the desired option ( 1024x768 ) is listed under System/Preferences/Monitors. Changing the resolution and clicking Apply results in a screen refresh, but the resolution remains at 1600x1200.
I have gone through just about every tutorial and thread I can find, but nothing works. Here is some relevant information I have gathered code...
View 1 Replies
View Related
Apr 8, 2011
I just got a DVI cable so I can have a dual monitor setup, (one VGA, one DVI monitor), and when the DVI cable is plugged into our 20" widescreen, the correct resolution (1680 x 1050), a "No Signal" error message will appear on the monitor. When the resolution is lower with the DVI cable, it will show up, but everything will be a bit bold and blurry. When I plug our VGA cable into the VGA slot in this monitor, everything shows up fine.
View 9 Replies
View Related
May 19, 2011
Everything was ok with my PC up until today when I booted and found out that my screen resolution was all messed up making my desktop look like this. My distribution is Ubuntu 11.04.
View 1 Replies
View Related
May 28, 2011
So i just installed Ubuntu on my computer,the first thing i noticed was that my resolution was 800x600. i had used 1280x768 on windows. but when i tried to change the resolution i can't change it. its only limited to 640x480, so how do i change it to 1280x768?
View 9 Replies
View Related
