Ubuntu :: Can't Access Folder Because Of Lucid Upgrade
May 2, 2010
Just upgraded to Lucid from Karmic, but I've got two problems:
1: After install I restarted, but it just showed the boot loader for 1 second and then black screen!
I then thought I would just reinstall Ubuntu so I used the Live CD to access the folders on the computer to get a backup.
2: But some of the folders in the Documents folder has got a white cross over it and when I try to open them I get the message: "The folder contents could not be displayed."
What I want is just to get the files (some of them is a bit important) and make a quick reinstall so if somebody knows a way to open the folders and make a backup it would be GREAT.
View 7 Replies
ADVERTISEMENT
May 17, 2010
I have a 160gb Hard Drive, I partitioned like this:
1. First partition 16GB, ext4, mounted / I have my Lucid filesystem on this partition and boot flagged.
2. Second partition 112GB (extended- 110gb as /home, and 2gb as swap memory)
My disk list:
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1946 15631213+ 83 Linux
/dev/sda2 1947 15647 110053282+ 5 Extended
/dev/sda5 1947 2274 2634628+ 82 Linux swap / Solaris
/dev/sda6 2275 15647 107418591 83 Linux
I have my system upgraded from Karmic 9.04 (automatic distro upgraded), but I have too many problems with this upgrade, (nvidia video card not working properly, I can't mount my mp3 player (sansa), and another issues with sounds, etc.) Since I have a separate /home partition, and separate / partition, I would like to do a fresh install of lucid on my first partition (/dev/sda1), thinking of maybe it will fix all my problems with a fresh install from a Lucid CD,
My questions are:
1. If I do a fresh install on /, will I be able to access my home folder on the extended partition?.
2. If I do a fresh install on /, the Lucid installer will recognise my /home partition, or will install everything again?. (meaning another home folder), I don't want 2 home folder,
3. Am I going to have a permission problems between the fresh install and all my stuff in /home partition?
View 5 Replies
View Related
May 1, 2010
Upgraded a 9.10 installation to 10.04 and now, on trying to execute Dispcal I get
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'
The lights on the Huey flash as if calibration is about to start, but then I get the error. The Huey is connected as it always has been, via a USB hub. No change there. I have also re-installed the Argyll package. A disconnect and reconnect of the Huey prompts this.
[code]...
View 1 Replies
View Related
Apr 24, 2010
I'm using ubuntu server 9.10 for a home build NAS. Everything is working great just have one more thing to figure out. I have Samba set up to access my files and I set up a recycle feature so anything deleted will get moved to a Recycled folder. (I learned this the hard way after hitting delete key by accident while browsing the shares in windows. Lost 100 GB of data)
Now it is for the most part working but the permissions on folders isn't getting set right. If I delete a file in a share I can go to Recycle bin folder and delete the file for good. But if I delete a folder I can not access that folder to delete or restore from the Recycle bin folder. I have to chmod the folder before I can do anything with it. Anything I can change to get folders deleted via windows to have the right permissions when it is moved to the Recycle bin folder?
[Code]///
View 1 Replies
View Related
May 26, 2010
- I have ubuntu installed, and win7 is installed using vbox.
- I know how to set shared folder, so win7 can access the folder in ubuntu.
- I need to have an access to certain folder in win7 from ubuntu.
How can I do that?It is not about samba, right?
View 5 Replies
View Related
Oct 28, 2010
I want to give a mounted folder /mnt/folder access so that 'root and the group test have read write access' and all other users have read access I understand most of the chmod command, the users groups world etc but where in the 'command' do you specify which 'group' or 'user' you are giving the read / write access to? in all the tutorials i've seen no where do you specify the actual group or user.
View 3 Replies
View Related
May 4, 2010
How did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
View 9 Replies
View Related
Apr 22, 2011
I've created a new user for a SSH tunnel only.After login I can access all directories because permissions is set for "Others" to "Access files".Now my question: Is this normal that permissions for Folder access for "Others" is always set to "Access files"?I don't want my SSH tunnel user accessing the directories.
View 4 Replies
View Related
Jun 11, 2010
Using Ubuntu Lucid 10.04System froze, and after reboot, my homefolder is displayed on my desktop.
View 3 Replies
View Related
Jun 23, 2010
I did it on a friend's desktop and it worked a treat. All her settings, passwords etc... remained.
Is there any catch to doing this or is it that easy?
View 4 Replies
View Related
Jun 9, 2010
I am planning to move to Lucid from Karmic now that I am out of university for the summer and have time. I have heard that there is a way to copy your home folder over to the next release and all of the data and program settings will remain intact. I have tried some research on the subject but everything I have found has been extremely confusing. I want to do a fresh install (as my updater has been failing time and time again and asking for partial upgrades etc). Instead of creating a new partition for the home folder, would it be possible to move it to an external drive and copy it back over (I have tried to copy it to the external but I get some errors even in sudo)?
View 4 Replies
View Related
Dec 22, 2010
I just got a new PC with 2TB of HDD space and it's running Ubuntu 10.04.1 32bit. I have created a user for networking, called share and have created a folder within the home folder called public. I then shared the folder and gave 777 access to it as I want this to be public - but for my local network and my later for ssh access. I have installed samba, and under the sharing options I allowed for guest logins and people to write and delete from folder. SO how would I be able to "see" this from my windows machine? It's running XP pro and it has a domain other than workgroup - but that shouldn't affect it should it?
Also, the laptop with XP is on the wireless with and internal IP of 10.0.0.135 and my PC is on the LAN connection with and internal IP of 10.0.0.1 I'm sort of familiar with networks, but I have NO clue as to how to do this.
View 3 Replies
View Related
May 10, 2010
After a powerdown during my upgrade of Ubuntu 9.10 to Ubuntu 10.04 that rendered my operating system useless I can get to my /home folder. The /home folder is locked and can not be copied or read. This means I can't reinstall my stuff and keep my files. The rest of my data (except for the /root folder) seams to be unlocked. How can I get to my /home folder? Does anyone know how to unlock it?
View 2 Replies
View Related
Apr 30, 2010
Today i installed the latest version of ubuntu. While working, the monitor went to standby and a popup window came, saying that in running in low graphics mode.Later i tried to create a new folder on desktop, but it seems like it friezed (only the desktop, everything else is working).How to solve this problem with the desktop.
View 2 Replies
View Related
May 4, 2010
I have installed 10.04 on my MacBook Pro 6,2, and am trying to access some files stored in my User directory on the OS X partition of the laptop. I get a permission-denied error, but I figured this was a similar issue to the one mentioned in the stickied "How to Install Ubuntu 9.04 on Intel-Based Macs" thread.However, the suggest fix,Code:sudo usermod -u 501 -g 20 richarddoesn't exactly work for me. I tried this, but found myself suddenly logged out of my main account. On the log-in screen, only my second account showed up. Luckily, I was able to log into that, and re-usermod my main account back to it's original userid number.I am guessing that my strange error had to do with the abnormal (for ubuntu, at least) userid?
View 9 Replies
View Related
Jun 7, 2010
I just got an Evo 4g(great phone) but when I attach it to my computer via USB I can't access the memory card. Linux recognizes it as an Evo and shows it as a USB drive but nothing happens when I try to open it as a folder.
View 5 Replies
View Related
Aug 4, 2010
I am trying to access a shared printer connected to my Win7 PC from a laptop running Lucid Lynx. I have Samba installed and configured okay (I think) and I can browse the Ubuntu laptop from Windows but when I try to access shares on the Win7 machine I get a message NT_STATUS_UNSUCCESSFUL.
I've reviewed the security settings on the Win7 machine and tried turning off the firewall. I can see the Win7 computer on my network and ping it from the Ubuntu laptop but I cannot access shared folders or the printer.
View 2 Replies
View Related
Jun 9, 2010
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
View 4 Replies
View Related
Jun 16, 2010
Once again, after upgrade - NO SOUND. Read all the various forum attempts at getting sound working. Tried them. Still doesn't work. Has been an ongoing problem after each release. Pulseausdio has been removed but still seems to be there somehow, as in, when running alsamixer, the following is output:
alsamixer
ALSA lib pulse.c:229pulse_connect) PulseAudio: Unable to connect: Connection refused
cannot open mixer: Connection refused
or, aplay -l, produces:
aplay: device_list:223: no soundcards found...
so, I guess that's the problem. But how do you get it to recognise the card? The only thing that has been done since upgrading was to remove pulseaudio which wasn't part of the prior install in anycase but somehow injected itself during the upgrade.
View 6 Replies
View Related
Oct 7, 2010
I am using 10.04 how can I upgrade to 10.10 ?
View 3 Replies
View Related
May 30, 2011
Installed Lucid as a dual boot on Dell Dimension2400. Upgrade Mgr gave me 501 upgrades to install, which Upgrade Mgr did, after which It locks up on login screen. I am getting the following error: [1.809435] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet00:0b:db:a1:a9 [9.412958] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear. Do I need to buy a new ethernet card, or is there a "BUG"?
View 1 Replies
View Related
Mar 1, 2010
i tried update-manager -d from GUI and asked to downlaod 678 MB...so i downlaoded the i386 iso 685 from cdimage.ubuntu.com/alpha-3..now how to upgrade to 10.04 lucid alpha 3 from 9.10.
View 1 Replies
View Related
Apr 24, 2010
Heres' what I get when I try to run it from the terminal.
Code:
anthony@ubuntu:~$ firefox
LoadPlugin: failed to initialize shared library /home/anthony/.mozilla/plugins/libflashplayer.so [/home/anthony/.mozilla/plugins/libflashplayer.so: wrong ELF class: ELFCLASS32]
LoadPlugin: failed to initialize shared library /usr/lib/firefox-addons/plugins/libflashplayer.so [/usr/lib/firefox-addons/plugins/libflashplayer.so: wrong ELF class: ELFCLASS32]
Attempting to load the system libmoon
Segmentation fault
View 7 Replies
View Related
Apr 30, 2010
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies
View Related
May 1, 2010
Perfectly working 9.10 just upgrade to 10.04, and now CUPS won't play ball. Any time I try to add a printer with the inbuilt Printer admin utility I get the message:
There was an error during the CUPS operation: 'server-error-internal-error'
If I try and add the printer using http://localhost:631 - any operation gives me:
631 - Request Entity Too Large
My previously installed printer has been removed automagically. Boo. So far I have:
aptitude purge cups
aptitude install cups
Which has made absolutely no difference.
View 1 Replies
View Related
May 4, 2010
I was put somewhat in charge of a server last semester running Ubuntu. It serves as a router and general purpose computer for a robotics lab. Yesterday, I went do dist-upgrade using the command line, and ran into a couple of bugs with gtk libraries which I fixed based on the bug reports. However, the computer decided to reboot for some reason in the middle of the upgrade and killed the running OS. I currently have it up on a Debian recovery CD. I can't get past intramfs without the CD. It is dying somewhere in rsyslog with an error about a broken pipe. I am not sure where to go from here. I will post actual error messages when I get back infront of the machine. No one knows how the machine was set up in the first place and it holds a few secrets we need to keep, so reinstall is the last option.
View 5 Replies
View Related
May 6, 2010
I upgraded to Lucid yesterday. All of them solved, except this one: when I connect to my kubuntu PC from a Windows PC and launch x11vnc on the remote and TightVNC on the local, it keeps repainting the window making it unusable. Nothing gets printed to the log when the repaintings occur. Using -noxdamage or -nowf doesn't change a thing. -ncache doesn't work (I get an "ERROR: No active KDE sessions!").
View 6 Replies
View Related
May 11, 2010
I upgraded successfully last night from Hardy Heron to Lucid Lynx, but have no sound now. After searching around I can see that this is a fairly common problem. But none of the proposed solutions that work for other people have yet worked for me.
If I type 'alsamixer' at the command line, everything looks fine. There are no 'MM's indicating something being muted. I tried removing and reinstalling alsamixer and pulseaudio with no success. Edited lines 45 and 46 of /etc/pulse/default.pa with no luck.
View 9 Replies
View Related
May 13, 2010
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies
View Related
May 14, 2010
I upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.
My computer is Asus 1201N: [url]
View 4 Replies
View Related
