Recently I installed the Matchbox desktop enviroment to try it out as I was going to use it on an embedded device (not any more though). When I Rebooted my PC, Matchbox came up (I didn't need to login). I unistalled Matchbox on Matchbox (and watched it break), restarted my PC and now GDM (Login manager) and Gnome won't show up after booting giving me a completely blank screen. I'm on Ubuntu 10.04.2 LTS.
View 3 RepliesMy laptop screen goes blank right after the bios is loaded. Live CDs have no effect either.I installed arch linux to my whole HDD today. Last time I installed ubuntu linux to my whole HDD, the same problem happened.The way I fixed the problem last time was by formatting the HDD with an internal HDD dock and then installing windows with linux dual boot.As I do not want to go through the hassle by installing windows again, and I would be very delighted if anyone had an alternate way. I really want my laptop to be windows free!It seems to me that my laptop is somehow constructed to crash / go blank if no windows partition / boot loader is detected. I have no idea why they would do that, maybe you have a better explanation?
View 9 Replies View RelatedTrying to hibernate causes a blank screen to show up with a blinking text cursor. I have to force restart to get it working again.
View 2 Replies View RelatedRecently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View Relatedi'm running 11.3 kde 4.4, with a Broadcom 4318. since installing 11.3 a few days ago, whenever i'm connected via wireless, one of two things always happen: when trying to play video (hulu, ....., etc.) in firefox, within a minute or so i will get the BSOD--that is, my screen will go black, and my cap/num lock lights will flash on and off. also, when regularly browsing the internet...not long after opening firefox, it will stop working like i have no connection, and then i will get a frozen screen and system within a minute or two after seeing a variation of this communication message:
"Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784417] process irq/11-b43 (pid: 1974, ti=debee000 task=dd291170 task.ti=debee000 Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784424] Stack: Message from syslog@sbkra at Nov 2 21:09:53 kernel: [956.784458] Call Trace: "a couple times, i've gotten this message and the following freeze when running video in firefox.
strangely, i have no problems running streaming audio through smplayer. and i have no problems playing saved video files through smplayer. and i have absolutely no problems whatsoever browsing or playing online video while connected via ethernet.
i've also searched through the various forum sections to try to address the issue, but nothing i've tried has worked. nor has anyone had a problem identical or even similar to this. btw...in relation to "broadcom", yast tells me that i have "b43-firmware" and "b43-fwcutter" installed. nothing else. i do not have "ndiswrapper" installed, because this gave me problems in 11.2, and this problem mentioned here was happening in 11.3 before i uninstalled "ndiswrapper". and the repos i have are: Packman, OSS, Non-OSS, and Update.
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
ive just installed dosbox, my favorite dos emulator. in windows, i usually used to play doom and both sound and video worked flawlessly. when i tried running doom in dosbox in ubuntu, the game ran perfectly, but the problem is with the sound. the soundblaster sound effects stutter and are not even working at times. the soundblaster based music doesnt even work! i either blame pulse-audio or the defaut config settings.
View 1 Replies View RelatedIs there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View Relatedthis is super embarresing. ive made desktop enviroments for my friends but i cant figure out how too install this
[URL]
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
in the past i always used debian for servers only (mainly webservers, routers and antispam gateways), but now i have to develop some application for linux so i installed it on a desktop (have always been running windows on my desktops). i am running testing (mainly because i need some more recent packages and working with stable i find myself using backports most of the time). now i have seen that the standard used web browser is iceweasel (which according to sources i found is a firefox fork) but this browser seems to have some troubles:
- videos : always gives me an error in the video frame and i have to clear my cookies and reload the page to make it work for every single video i watch. embedded ..... vids work fine.
- gmail : as soon as i open my gmail account on any tab or iceweasel window all other windows are unuseable (show blank as if the application crashed) but gmail works fine. as soon as i close the iceweasel window where gmail is running all other windows are doing normal again.
- lots of pages display very poorly on iceweasel (misplaced div's, ... etc) : this is nearly always on pages where you find overlayed advertising in div's so i guess this is mainly dued to poor coding of those junk adds (i can live with that).
is there any alternative to iceweasel. especially the gmail part is very annoying, the rest i could live with (but prefer not to). i googled the web for those problems but i mostly found that these problems occured because of some extension (for example : ad blocker) but i don't use those so it didn't solve my problem.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
My problem is that I can't log in to Ubuntu, as you've already seen in the title. Here's what's happening:
I turn on the computer. I see the GRUB. I press Enter. I see a blinking underscore (_) as if i was in a terminal. The underscore disappears and I can see my cursor, but nothing else. I can move the cursor, but that's all I can do.
I've seen some similar problem here on the forums, but he could log in, he just couldn't see the screen.roblem!
OS: Ubuntu 10.04 LTS, kernel 2.6.32-31-generic. All updates are current.
Configuration -CPU: Intel Core i5-2500K, quad core 3.30GHz
Memory: 16GB RAM (10% used), 20GB swap-space (0% used)
Video: Two ASUS EAH5450 Silent cards, each with ATI Radeon HD-5450 GPU and 512 MB
Monitors: Sceptre 22", 1680x1050; both connected to one video card. The second video card has no monitors connected at this time.
ATI/AMD proprietary FGLRX driverLSPCI output -
[Code].....
The PC boots up normally into Gnome desktop environment. When I hit ctl-alt-[F1-F6], -The screens blank out. One screen gets no video signal, as evidenced by a blinking power light The other screen is completely blank (not even a blinking cursor) If I hit ctl-alt-F7, I get the Gnome desktop back. I have been able to determine that even if the screen is blank, and appears completely dead, the system processes my keystrokes. For example, if I pretend that I am at the log-in screen and type <username> <enter>, then <password><enter>, then 'xinit -fg white -bg blue -- :1 vt8'<enter>, the PC switches to virtual terminal 8, and shows a shell window. From that point onwards, my keyboard entries show up in white-on-blue characters, and the behavior of this shell window is perfectly normal. I can log into another Linux box using ssh, start a Gnome / KDE / XFCE4 / LXDE session and work on the machine normally; or start another X-session and a desktop environment of my choice. My guess is, the console is invoked perfectly well; it is set to display black-on-black characters.
What I Am Looking For:Confirm if my guess about black-on-black console is valid.
Suggest how I could get a screen showing white characters on black (or indeed, any combination I could read)
I've recently installed the 64bit version of WUBI on ASUS K50IJ with windows 7. Everything went smooth however when I try to boot into ubuntu, it shows that all the drivers are loading, I can even see the desktop background image for a second and then the screen goes blank. It is still ON however nothing is showing on it.
Pressing "CTRL+ALT+DEL" reboot the system.
even get access to the console for further debugging?
Anyway one day I start my computer and instead of starting normally it comes up with a screen which says GNU GRUB version 1.97~beta at the top. I selected the option Ubuntu, Linux 2.6.31-19-generic as I figured this is what normally loads without being prompted in the grub menu, but after this I got the ubuntu logo for a few seconds then my screen goes blank. My laptop is a hp510.
View 9 Replies View RelatedI'm a newbie so apologies if there is a trivial answer to this.
I (maybe somewhat rashly) tried to connect my tv to my laptop (Dell Latitude D400) running Ubuntu 9.10.
I plugged in the cable, went to the System>Display menu, where it had detected the model and make of tv (Samsung 19" LCD) (I think the resolution was 1650 x 1050 or similar). I clicked the box to activate the second monitor with the "Virtual resolution" adjusted. It told me to log out then log back in.
I accordingly logged out but then couldn't log back in. It had evidently changed the resolution not only on the 2nd monitor but also on the laptop monitor. A box was visible on screen but completely illegible/unclear since the laptop monitor couldn't display that resolution.
After a few restarts and button pushes it is now restarting at a terminal (I enter my username/password at a command prompt on an otherwise blank screen rather than the graphical interface loading up).
Question: are there any commands that could change the resolution back to its original settings then restart the Ubuntu graphic interface? Some thing similar to the "load with last known good configuration settings" option in Windows maybe.
I was just surfing the web the screen suddenly went blank and then the clock went off.
View 2 Replies View RelatedMy ubuntu isn't starting up today. I can't remember anything unusual happening last night, not even a standard system update.
It presents me with the Grub loader, screen goes blank, and that's as much as I get. I have gone into a recovery mode through the grub loader, and that gives me a bit more info, but I don't know what to do with the information it is giving me.
It says: Gave up waiting for root device. common problems (etc) ALERT! /dev/disk/by-uuid/<long name> does not exist. Dropping to a shell.
It is right - the /dev/disk/.... does not exist. A different file with an equally long filename does exist
Last week I very eagerly downloaded Ubuntu 10.04 and burnt it to a CD. I just want to try out the new version using the Live-CD. I tried it on both my home desktop and my work notebook. I was able to get the initial screen where I can select the language and keyboard, etc.. But when I tried to start the program I ended up with a blank screen one both computers.
So I just thought, I will wait until they get these problems fixed then I will download and burn a new cd. Question, have their been fixes to the ISO file since it first was released that would fix these kind of problem? How does one know if the ISO file has been upgraded; is there something after the 10.04.01 or something like that?
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
I have an HP 2730pAfter upgrade i have a blank screen. i don't get a splash screen and i can't alt+ctrl+F6 to get extra terminal.Unfortunately i can't ssh into the box either since i don't have openssh-server installed.Is there anything i can do short of taking the harddrive out and putting it into another box?
View 2 Replies View RelatedJust upgraded from Karmic to Lucid.. Everything was running smoothly except compositing so I enabled the Open Source Edge repos and downloaded the latest driver my card (a ati radeon x1650). I rebooted to a bios splash and then nothing.. blank screen. After about 4 seconds of nothing the monitor flicks on showing the kubuntu bootsplash for a split second then blank again.ctrl + alt + f$ isn't displaying a tty for meI'm not getting the usual grub menu on startup (esc isnt bringing it up)(it's a usb keyboard enabled in the bios)
View 3 Replies View Related