How would one go about backing up a hard drive? I want my Windows hard drive to be backed up, so that I can restore it onto the hard drive if the hard drive was blanked.
If this hard drive is formatted and linux is installed on it, I want to be able to restore my current Windows partitions (Win 7 and Win XP) and probably the boot loader. I am sure this is possible, but what would be the best way to go about it?
So, I recently acquired a second hard drive (1.5 TB) and I wish to partition Ubuntu 11.04 with Windows 7. I've set everything up properly and using the Disk Utility in my System Settings I've created a 1 TB partition which I want to use for Linux. I think it has the proper partition type but how do I exactly go about transferring all my files from the hard drive I'm using now to the partition I would like to have?
View 2 Replies View RelatedI want to securely backup my 80G HD, but doing a complete backup takesforever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive.% After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work.
% The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does thisIn reality, I want to do this for multiple machines drives each, but think that solving the above will solve the general
I am having on trying to backup my crashed laptop with ubuntu 9.10 when i double click on my hard drive, it says "unable to mount location" and it says "unable to mount location" a job is pending on /dev/sda2 when i right click on my hard drive and select mount.
View 2 Replies View RelatedWhat is the recommended way to backup all files to an external hard drive? Should it be done through CLI or should a third party program be used?
View 2 Replies View RelatedI've been thinking about it and I have a few ideas how I could do this...
I could always just image the drive...
Code:
dd if=/dev/sda of=/media/EXHD/bakup_$(date +%F).iso
Also; I could use rsync...
Code:
rsync -auv --delete / /media/EXHD/bakup_$(date +%F)/
[Code]....
I've been doing mostly "dd" images...but was wondering if I'm just wasting time backing up a mostly empty HD (256GB and only 5% is used...so dd-ing seems like kinda of a waste).
In a few hours I'll have a new 500GB Sony laptop, filled with the usual Sony rubbish which I'll promptly be replacing with Ubuntu or Crunchbang or something. However, first I want to make a full clone of the drive (including recovery partitions), should I wish to return it to Sony or sell it on in its factory state.
The problem is that the only backup drives I have are less than 500GB - the biggest I have is 250GB or so! So I need to backup and compress on-the-fly.
What's the best way to do this? Presumably dd piped into gzip would do the trick, or does anyone have any other suggestions to accomplish this?
I have an Ubuntu server running Lucid. I'd like to be able to back up the hard drive in the server to an external hard drive. I try to plug in a drive via a USB port and it doesn't appear to mount automatically, as it does on the desktop version. Questions: 1) What/where should I be looking for to see if the drive is mounted? (I've looked in /dev and /media; no dice.) 2) What's the mount command I should use to manually mount the external hard drive? 3) What backup commands or programs, other than rsync, are recommended? (Nothing against rsync.)
View 5 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedI have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies View Relatedi have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies View RelatedI have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
View 9 Replies View RelatedI am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies View RelatedI want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies View RelatedI have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View RelatedI have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View Relatedi know that my question is not according to the rule of Hardware.Before posting I thought a lot.But i found this forum helpful in many ways. So my question is should I consider of installing a cooler(fan) for Hard drive.
View 9 Replies View Related