Ubuntu :: Asus M4N78-VM (Geforce 8200) Resume - No Screen And The Monitor Is Off

Feb 19, 2010

I have a problem with resume from ram on my hardware. I tried to install Karmic Alternate and Lucid Alternate (command line only). After resume I have no screen and the monitor is off. I also tried different pm-quirks, in combination too. I tried to install the nouveau driver on lucid but then the monitor is always off. I guess to install the nvidia-driver is no solution for a command line system?

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Unable To Use Nvidia GeForce 8200 Driver On 11.04?

May 28, 2011

I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:

$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found

I was not able to install the package.

$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig

[code].......

View 9 Replies View Related

Fedora :: Can't Drive Nvidia GeForce 8200 Chipset For FC12?

Dec 2, 2009

I am a recruit for Linux and install FC12 on my PC. The motherboard is ASUS M3N78-CM. The nvidia GeForce 8200 chipset on the motherboard is directlt used for vedio. The driver : NVIDIA-Linux-x86_64-190.42-pkg2.run is downloaded from Nvidia website, but it can't drive the chipset successfully. So i can not start X-window. If anyone has a solution to this problem?

View 3 Replies View Related

Hardware :: XfX GeForce 8200 Mobo Doesn't Boot Linux Or Windows

Apr 9, 2010

In Linux, passing "pci=nomsi" to the kernel before it boots generally helps it "find the hard drive". In windows however, it wont even install. It loads all the components then when it says its starting Windows, it comes up with an error, just gives a code, no explanation. Now granted this has more to do with Windows then Linux but there is no forum for that here and this is related. I wanted to try and run some games that would not work under wine nor virtualbox, so i shrunk my partition to make room for XP and it wouldn't install. If you're just going to lecture me on the lack of need for windows please to not respond to this. The specific motherboard is:

[Code]...

View 14 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found

Jan 11, 2011

After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.

Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h

PATH:

Using: nvidia-installer ncurses user interface

ERROR:

View 9 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce 6150SE & VX20LHD Monitor - Screen Resolution In Windows 7

Sep 9, 2010

I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.

I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:

I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD

View 3 Replies View Related

Fedora Hardware :: Setup Nvidia On Geforce 5700LE - Monitor Doesn't Support Screen Resolution

May 13, 2010

First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.

So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.

View 10 Replies View Related

Ubuntu Multimedia :: Acer 1200X - Nvidia 8200 Integrated GPU Dual Monitor

Feb 7, 2010

I have an Acer 1200X with an Nvidia 8200 graphics GPU integrated on the motherboard. I have an HDMI and VGA output. I have downloaded the Nvidia graphics driver using envyNG and the old fashioned way. I have tried configuring the monitors 15 ways from Sunday in the configuration and I cannot for the life of me get dual monitors to work.

When I go into configuration with the Nvidia wizzard it blanks like its going to work then just stays black with the mouse cursor. I also cannot save as I get a "parsing" error. I am using Ubuntu 9.10 and have even tried using envyNG to get the monitors to work on twinview... NOTHING Hope someone can help!

My dad who is a Linux nut came over to help and he left 3 hours later because were tempted to chuck the computer out the window...I need to figure this out as this is going to be my work computer and I need dual screens.

View 1 Replies View Related

OpenSUSE Hardware :: No HDMI Audio On NVidia GeForce / NForce IGPU On Mb ASUS P5N7A-VM 11.2 Or 11.3?

Aug 6, 2010

I have an ASUS P5N7A-VM motherboard and was using Optical out for sound without issues running OpenSuse 11.2. I then got rid of my receiver and wanted to just use HDMI sound. I couldn't get it to work so I upgraded to OpenSuse 11.3. I simply went to the Sound control panel applet and changed it to Internal Audio Digital Stereo (HDMI). I can not get any sound from it on OpenSuse 11.3 either. I have ran sound tests from the command line "speaker-test -Dplug:front -c2 -l5 -twav" which all run without errors, but nothing comes out of the speakers. I have ran the suggestion of one post "alsa-info.sh" and here are my results:

http://www.alsa-project.org/db/?f=27...860267e7079411. I have also tried the following post which did not resolve the problem since it seems to be Ubuntu based. I have undid everything from the post as well to make sure I don't stray to far from normal.

[HOWTO] HDMI audio on nVidia GeForce/nForce iGPU - XBMC Community Forum

View 9 Replies View Related

Ubuntu :: NVidia GeForce 8500 GT - Get A Speed Boost And For A Dual Monitor Setup?

Jan 12, 2011

I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...

View 2 Replies View Related

Ubuntu Installation :: 9.10 Install On M4N78 Pro Hangs On Restart

Jan 9, 2010

I just upgraded my system's motherboard with an Asus M4N78 Pro and did a clean install of 9.10. The install seems to go fine but when it finishes and does the final restart I seems to get stuck at the place you'd normally see the GRUB menu. Instead all I see is a black screen with a flashing cursor in the left corner. This isn't just a long boot, its stuck. It never progresses past this point.

During the install everything seems fine. Video, network etc. I've tried several reburned CDs and I get the same result each time. For the record I've installed Ubuntu as a single partition an IDE drive. The bios is set to boot from that drive. ow the heck can I figure out what is happening? Is there a way to boot and display any and all messages displayed? Is this thing hanging in GRUB somewhere?

View 4 Replies View Related

OpenSUSE Hardware :: Monitor Aspect Ratio Samsung 226BW / GeForce 8600GT

Oct 11, 2010

I just finish installing 11.3. Everything works perfectly expect few issues with my display setting. I've installed SUSE on my laptop Acer Aspire 5920G and I got Samsng 226BW as my second display. How can I change the resolution of my Samsung display to 1680*1050? currently set as 1024*768 and I can't change it. Do I need to update my NVIDIA driver? if so how can I do that? finally, If I get this fixed how can I set my Samsung to be the main display?

View 1 Replies View Related

Hardware :: GeForce NV34 FX-5200 Versus The Samsung SyncMaster 731N Monitor

Apr 13, 2010

I have changed to Debian 5.0 on this old Gateway box, and the video is the GeForce NV34 FX-5200. I set it up with a Dell monitor and everything works great, I have several screen resolutions avail. But now I changed to the Samsung SyncMaster 731N and now I have only 2 resolution choices. 600x400 and 800X600. Besides move back to the Dell, how can I get the card to work with the monitor?

View 3 Replies View Related

Software :: Nstalling The Driver Of Nvidia GEForce 9800 GT On RHEL5.5 The Monitor Goes Out Of Range?

Nov 2, 2010

After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?

View 5 Replies View Related

Ubuntu Multimedia :: Asus 1201n And External Monitor Switching?

Apr 1, 2011

Im looking for kind of an applet for Ubuntu for switching between external and internal monitor of my netbook (Asus 1201n). Currently I can enter into NVIDIA X Server Settings and set up an external monitor without any problem, but this is kind of slow way of doing this comparing to the way I do it in Windows (pressing fn + f8 ) and I'm often when in my home plug-in into an external monitor. It looks like there is such an option in Jupiter (I'm using it for other function keys) but for my computer it always says that there is no external monitor detected (but function keys for switching are working ). Is there any other tool which could help me? It does not need to react on function keys, just choosing an option from tray would be enough for me. I'm new with linux and not so fancy about changing many things in text files, but when I had a good instructions how then I can do this.

View 1 Replies View Related

Fedora :: Unable To Use The Screensaver In Asus 27" Monitor

Jan 27, 2011

Just upgraded to a super sexy Asus 27" LED monitor. It's awesome, however ther are a few quirks I'm wondering if I just have to live with or if they're fixable. These may not be directly related to the monitor...hence posting here rather than hardware.Specs: Asus 27" LED VE278Q monitor. Nvidia graphics card. Dell 8100 w/ 8GB ram, 64-bit. Fedora 13 running Gnome.

The first quirk is that I have a VNC window open almost all the time and if I leave my cursor on the VNC window, the screensaver won't come on, even if no action has happened on the keyboard or mouse (or in the VNC window). It would be nice if the screensaver worked.

The second problem is that when I'm using the keyboard and/or mouse in the VNC window, apparently, the screensaver doesn't realize the keyboard is being used...and the moment I switch to a different window, up comes the screensaver.

I'm having what I think is a documented hardware issue probably related to the Nvidia driver: at infrequent times, often when I'm using GIMP or other graphics-intensive program, the screen will flicker and/or go completely black for a split second. Distracting as all hell, but not a show stopper. It does not appear to happen when I'm using the web or doing other non-graphic intensive stuff, so I'm guessing this is not the monitor itself, but rather the card or the drivers for it.

View 5 Replies View Related

General :: Toshiba Tecra M2S With NVIDIA GeForce FX Go5200 Driving Dell External Monitor Quits Working

Mar 29, 2010

I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.

When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:

[code]...

For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....

View 4 Replies View Related

Ubuntu :: No Screen When Resume From Suspend?

May 21, 2010

When I close my laptop lid (it goes into suspend mode). When I open it again, I can't see anything but a black screen. I have to reset the computer manually to accessUbuntu again.On a related note probably.. for 'some' screensavers, when I click to re-access my desktop, the screensaver freezes, but I can't see the unlock dialogue. I can however still type my password and it will unlock, I just can't see what I'm doing

View 2 Replies View Related

Ubuntu :: Resume Screen From Ssh That Was Started Without Ssh?

Jul 18, 2010

Like the subject says, I was at my server and logged in directly and started screen. I then started a command and detached the screen.I then logged in remotely through ssh thinking I could resume the screen but when I try "screen -r", it says not screens to resume. I see the screen process still running and when I do go back to the server directly (no ssh) I can resume the screen and things are running just fine.Anyone know how to resume a screen remotely that wasn't started remotely?

View 2 Replies View Related

Ubuntu :: Attempting To Resume Another User's Screen

Oct 5, 2010

I am attempting to resume another user's screen (-r) and execute a command in it (-X) While I can resume (-r), if I combine that with executing a command (-X), errors arise. Instead of trying to explain my problems, see the below outputs.

All screens are ran as one user ("minecraft") minecraft has his .screenrc file setup to enable multiuser mode, and to allow access from kjohnson

Code:
minecraft@mc1:~$ screen -list
There are screens on:
18810.threatgreater (10/05/2010 02:23:31 PM) (Multi, detached)
1185.baron (10/05/2010 07:29:26 AM) (Multi, detached)

[Code].....

View 1 Replies View Related

Ubuntu :: Blank Screen On Resume From Suspend Mode?

Jun 8, 2010

Title says it all. I close my laptop lid. It goes into suspend mode. I open it up again, the computer powers up... and I see a black blank screen. No key combinations seems to bring anything back.

View 9 Replies View Related

Software :: Mouse Click On Monitor 1 Kills Full-screen In Flash On Monitor 2 ?

Feb 23, 2010

I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:

If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?

View 12 Replies View Related

Fedora :: External Monitor Won't Work - Both Monitor And Laptop Screen Black

Aug 7, 2011

I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.

I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.

I have a Thinkpad E420, Fedora 15

View 14 Replies View Related

General :: Screen Rate - Refresh Mode Of The Monitor In The Monitor Options Have Only One Option 60Hz

Mar 20, 2010

I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.

View 1 Replies View Related

Debian :: Blank Screen Upon Resume From Suspend?

Jan 28, 2010

Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.

View 8 Replies View Related

General :: Black And White Screen On Resume

Jun 17, 2011

After suspending my laptop, and then resuming the screen has black and white jagged wide zig zags across the screen. I can move the mouse and login fine, it's just the graphics are all screwed up. Has anyone had this problem before? Is this X? Is it a driver issue, my info is in my sig.

View 4 Replies View Related

Ubuntu Multimedia :: Screen Resolution Stuck At 1024x768 - NVidia GeForce 7100

Sep 16, 2010

I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.

Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...

Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.

View 9 Replies View Related

Ubuntu Multimedia :: GeForce 8400 GS + 10.10 - Screen Image Extrapolating The Display Boundaries

Nov 23, 2010

I have just installed a GeForce 8400 GS card in my Ubuntu 10.10 with the Nvidia proprietary driver( version number: 260.19.21).

The Display is connected to the desktop through an HDMI cable and the resolution is 1920 x 1080 .

After some trouble(Black Screens), almost everything is ok.

The only problem is the screen that is extrapolating the Display Boundaries.

I have tried to set it through the nvidia configuration program without success.

Is there any parameter in Xorg.conf that could resolve this issue?

View 1 Replies View Related

Fedora :: Hardware - GeForce 4 MX440 Vs GeForce FX5200

Aug 28, 2010

Today I received as a gift a 5 years old Gateway 500X CPU which is apparently dead due to a faulty motherboard (I still have to troubleshoot it, of course).

Even in the cause I can fix it, odds are I'll prefer to make the aforementioned CPU a donor for my other machines, instead of resurrecting an old Pentium 4 (no HT) system.

Being this the case I checked the parts for possible transplants:

512MB DDR PC2700 memory module (useful right off the shelf for my main desktop system).
120GB Maxtor IDE hard drive (also useful, assuming it is in working order).
128MB AGP8X NVIDIA GeForce4 MX440 graphics card.

On this last part (the graphics card) I have my doubts as of where to use it. My main desktop system already has an NVIDIA card: FX5200, 128MB, which is newer. The thing is that I've been doing some homework comparing both the MX440 and the FX5200 and get mixed opinions: for one thing the FX5200 is the latest of the two with some advantages like support for a later DirectX (which for Linux is pointless) and other things, but the FX5200 is also reported to be technically inferior to the MX440.

In your opinion/experience which card is a better performer? Should I expect a performance gain if I were to replace the FX5200 with the MX440?

View 4 Replies View Related

Slackware :: 13.37: Crazy Flashing Screen After ACPI Resume?

May 6, 2011

Slackware 13.37 is giving me ugly suspend/resume problems.When I suspend to RAM and my laptop wakes up again, I get a corrupt screen flashing like crazy.This happens when I suspend from the console and when in X11; be it by issuing 'echo mem >/sys/power/state' or 'pm-suspend'.Tried the 'save-pci' quirk for 'pm-suspend', no dice.Tried to POST the card with 'vbetool' after resume, no dice. Tried to save/restore vbestate before and after suspend/resume, no dice.What is one supposed to do to get this stuff to work in 2011?Funny thing that suspend-to-disk works as it should.Also, with 12.2 I would pick a VGA mode for the console in 'lilo.conf' and it would freaking stick. Not anymore. Now the 1st half of the boot is performed in my chosen mode (80x30), then it switches to maximum resolution with an idiotically unsightly small font.My laptop is an Acer Aspire 5101 with an ATI Radeon 200M card.Is anyone going thru the same hell or has anyone found a fix?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved