Ubuntu :: Applications Panel Bar Error
Sep 12, 2010
I was customizing my desktop and I decided I wanted to try out a dock so I installed docky, cairo dock, and awn via ubuntu tweak. Fortunately for me, docky decided it wanted to boot at startup. When this happened, my applications panel bar appeared right in the middle of the screen.So I uninstalled docky through ubuntu tweak and it seemed to resolve the problem. Unfortunately for me, I kept trying out the other docks. Opening cairo dock brought about the same problem for the applications panel bar. Something that should be noted is that I do not expand my panel bar. This problem doesn't happen if the panel bar is expanded.I've uninstalled AWN and Cairo Dock via ubuntu tweak but the problem remains.
View 1 Replies
ADVERTISEMENT
Dec 4, 2010
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
View 9 Replies
View Related
Sep 18, 2010
I can't see the applications that are running in the "system tray", How do I turn it back on? When I minimize Transmission to system tray the icon doesn't show up (program continues to run).
View 4 Replies
View Related
Apr 29, 2011
Want to move/place applications to the panel, in 11.04. Can't seem to locate where/how to do it? Should be very simple and I bet my face will be red.
View 4 Replies
View Related
May 14, 2011
Ubuntu 11..04 64-bitI hate unity. I set my desktop back to classic view. I managed to get the scroll bars back. But now, when I click on the button to shrink applications, the apps are not available in the panel. The apps seem to just close.
View 1 Replies
View Related
Jun 11, 2011
I installed Ubuntu 11.04 on my laptop and was looking to do the same onto my desktop.However, when I installed the 11.04 download and put it onto a disk and booted my Desktop from the disk, I went into try and the side panel that is on my laptop isn't on this one. It has the Applications, Places and System menus on the top as it was in 10.10.Is this just in the try version side of things, or how can i change it to the new side panel.....thing?
View 9 Replies
View Related
Mar 6, 2010
Is there anyway i can hide the top panel for maximized applications? It being gone reminds me of my X days I really dont want to..Also, I dont want to auto hide it, but just sent to background when an application is maximized. (i use chrome for browsing - when maximized the tabs are at the top and if set to auto hide, i keep revealing it while changing tabs which is annoying. )
View 6 Replies
View Related
May 2, 2010
Accidentally I removed applications buttons from lower panel. How to restore them?
View 10 Replies
View Related
May 30, 2010
When we start some applications like skype though we close it , it will minimize into the panel, another one is amarock that will not quit the application . But now I am not able to see the icons. ( As the applications are already running in background I cannot relaunch it )I can take the minimized applications, but when we close , how can I retrieve it ?
View 2 Replies
View Related
Oct 15, 2010
When I try and open a terminal on Fedora and minimize, the window title does not appear on the panel. Any other application like rdesktop as well doesn't appear either.
View 1 Replies
View Related
May 17, 2010
I just upgraded to Ubuntu 9.04. I inherited a problem from previous versions. The panel doesn't display the applications menu. Only a tiny, useless gray strip shows. Thus, i can't not just run apps, but i can't open a shell terminal to do something radical eithe
View 4 Replies
View Related
Jun 12, 2011
Anyone else encountered this issue? Alacarte opens and seems to be working properly however it will not write any changes to the "applications" panel. if I un-check, edit or remove any listing under Alacarte it is still in the applications panels. I ran it in a terminal window under both home user and root, not errors, and sitll will not save changes or revert.
I don't know if anyone else has experianced this. This may have started after the installation of wine, but not ceartian about that, that is just when I first noticed the issue.
View 11 Replies
View Related
Jan 24, 2011
I have two entries (identical ones) of the same app under Applications on my gnome panel. How can I remove one of them?
View 5 Replies
View Related
Jul 29, 2010
I am running a week old 11.3 install with KDE (no desktop effects), compiz, nvidia. Last night I was working away. I had Thundertbird, Firefox, and VMWare Workstation open. Maybe something else, but I don't remember.
I was typing away. Maybe I hit something on the keyboard, but maybe not. All apps just disappeared, meaning that they're windows were not open and were not minimized to the panel. I could open *new* windows, and I fire up a terminal and ran top, which showed that they were all running, just not visible. Obviously, this is a Bad Thing.
View 7 Replies
View Related
Feb 17, 2011
Do you know the GNOME Panel applet that is terminating running applications after clicking on them with the cursor and confirming the action with a Yes/No dialogue?I know about xkill, but it is not satisfying due to it has not confirmation dialogue.Instead, I would like to use xprop and kill and zenity
View 5 Replies
View Related
May 1, 2009
I am running CentOS 5.3, Gnome Panel 2.16.1. It seems some KDE applications just flash crazily in the windows list (task bar in Gnome panel). Usually when a new event happens to a window, it flashes to remind the user (I hate this *feature* anyway, but can't disable it...) But this time, when I switch from another workspace to the workspace that has (more than one) KDE applications (like kile and kdvi), they just simply start to flash, and the flashing window list appears on every workspace unless you click it.
I tried to disable the animation from gconf-editor, without success. Does anyone have similar issues? It is really annoying..
View 1 Replies
View Related
Dec 16, 2010
I've tried some more recent builds of Libre Office from Alien Bob and I'm still getting crashes when I try to dock the Navigator panel on the left side of the window for any of the office applications.
Details are in this post. More specifically, I'm running libreoffice-3.2.99.3-i486 from Eric. When I run 'oowriter' (Libreoffice Writer) from the command line, and then try to dock the navigator panel, I get this message after the crash:
Code:
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-size' of type
`GtkRequisition' from rc file value "0" of type `glong'
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-spacing' of type
`GtkBorder' from rc file value "0" of type `glong'
I don't know if it happens with the 64-bit version or not. I haven't tried it yet. I'm no stranger to submitting bug reports, but I haven't looked closely at Libreoffice's bug submitting procedures. I'll do that soon.
View 14 Replies
View Related
Nov 5, 2009
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies
View Related
May 20, 2011
i just installed ubuntu natty from windows few days ago , then switched to Xubuntu for better performance with my 512 ram .
now the application menu gives me "No application found" , but i can still open applications from terminal. and updates are installed.
i tried to add new application menu but still the same , there isn't anything odd in "edit menu" , i choosed the default one but still no applications found.
while running jdowanloader from terminal i noticed that "package manager file " or something like that doesn't exist ,
how can i fix the menu ? or at least how can i install its plugin?
when i switched for linux i was looking for performance and stability of the system on my relatively low spec pc , but Xubuntu freezes and hangs may be more than winXp "i still don't know why", and performance isn't that fast "swap memory 767 , ram 488 , nearly all the windows effects are disabled." ,
ubuntu software center also greatly slows the system when i run it
how can i can make Xubuntu faster than that? or at least stop freezing? how to fix ubuntu software center freeze??
View 2 Replies
View Related
Sep 19, 2010
I have an error icon in my Gnome panel that will not go away. It appeared after running an apt-get command (explained below). Everything is working fine, but I cannot get the error icon to go away. Surely there must be some file somewhere storing the state that is making this reappear. The icon occurred after the following: I recently upgraded to Ubuntu 10.04. Yesterday, I decided to add the Medibuntu repository to my apt sources based on the instructions at [URL] -- i.e., I ran the command:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list [URL] && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
In the terminal window, I saw the following error message amidst the other output:
W: GPG error: [URL] lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
However, everything appears to have worked fine. The Medibuntu repository has been added to my sources, the keyring has been added, and I am able to install packages from the repository using apt-get without any errors.
Nonetheless, an error icon appeared in the Gnome panel after running the above command-line, and it will not go away. If I move the mouse pointer over it, the following text displays:
An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: 'Unknown Error: '<type 'exceptions.SystemError'>' (E:Opening configuration file /etc/apt/apt.conf.d/99synaptic - ifstream::ifstream (13:Permission denied))' This usually mean that your installed packages have unmet dependencies
The file /etc/apt/apt.conf.d/99synaptic it mentions is present and is readable (at least as root). Running Package Manager works fine with no errors. I've tried running
sudo apt-get check
and it runs fine without any errors. Likewise,
sudo apt-get update
and
sudo apt-get upgrade
run fine with no errors. But the error icon remains.
If I log out of Gnome and log back in, the error icon returns. If I reboot, the error icon returns as soon as I log back into a Gnome session. How to I get rid of this?
View 2 Replies
View Related
Feb 4, 2011
I deleted the bottom panel, I put it back again but when I minimize windows they don't appear anywhere (they were appearing in this bottom panel) on the desktop! How to put set the panel back as it was, so that when I minimize windows they get down there.
View 2 Replies
View Related
Dec 2, 2010
I am a comparative newbie. I am running Ubuntu 10.10 and an error message has started to appear on the top panel:
W:Failed to fetch [URL] 404 Not Found
, W:Failed to fetch [URL] 404 Not Found
, E:Some index files failed to download, they have been ignored, or old ones used instead.
Everything seems to be working OK? What should I do? Should I ignore it? How to get rid of Error Icon in Top Panel(!)?
View 2 Replies
View Related
May 18, 2010
i have been using a vps computer (for counter-strike servers) for about 4 months now, i need to install phpmyadmin + mysql + appache2. i am running debian 5.0 btw, and everything is being done through putty, and winscp (i googled on how to reinstall php and mysql and saw a program called yum. but i have'nt tried to use it) first off, i tried to update
[code]...
i did'nt know what to type, so i exited out of putty, and rentered.[/quote] later i found the command for phpadmin, installed it. entered the password for mysql. and everything. looked like it was installed ok, then i tried to go to phpadmin. i typed in internet brower (http)://82.135.231.14/phpmyadmin[/url] and it wants to send me a file. now on my last vps, i had mysql and phpadmin and it worked fine. never got this error. why is it? and how can i fix it? should i reinstall it? btw, i need it for a thing called "amxbans" and a text message system (you send a text, and you will be a admin) i think thats all i need to install.
View 1 Replies
View Related
Nov 15, 2010
I just installed Ubuntu. I like it so far. After installing like 10 apps, I started getting this error: Quote: An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at www...
[Code]...
View 4 Replies
View Related
Jul 14, 2011
I've noticed recently that an error icon keeps appearing on my panel. When I mouse over it, it reads "The update information is outdated .This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon and then selecting 'Check for updates' and check if some of the listed repositories fail.".I used the Update Manager to check for security patches. When I do so, there are a few sources that failed. How do I correct this error? I have already run "sudo apt-get update" but this doesn't solve the issue.I'm running Ubuntu 10.04 LTS by the way.
View 9 Replies
View Related
Jan 25, 2011
There has been a red circle icon with a big white bar through it in the notifications area of my panel for days now. The alt-text (is that what it's called for an icon?) says "A problem occurred when checking for the updates." When I click on the icon the update manager appears and "builds data structures" but says there are no updates available.
View 1 Replies
View Related
Jul 17, 2011
I have been getting video error's in gnome-panel since I upgraded to Natty. It seems to become transparent on part of it, and my background covers it. I have tried deleting my gnome-panel preference's, to no aval. Does anybody know how to fix this?
View 9 Replies
View Related
Apr 17, 2011
I am running Xubuntu on a MacBook Pro with fluxbox as my window manager. Yesterday when I attempted to launch firefox I received a bus error and the application did not launch. I corrected the problem by removing and reinstalling firefox. Today the same problem is happening with emacs. I have not tried removing and reinstalling emacs so I am not sure if that will work but since the problem has occurred in more than one application now, I assume it points to a larger issue. I have done some research on bus errors but it isn't clear why this problem would manifest in different applications in this manner. After the a failed launch the dmesg reports this, which seems relevant:
[Code]....
View 2 Replies
View Related
Mar 6, 2010
Trying to run Secondlife-i686-1.23.5.136262 app on Ubuntu 9.10 64 BitS I get
./secondlife/
64-bit Linux detected: Disabling GStreamer (streaming video and music) by default; edit ./secondlife/ to re-enable.
Running from /home/pbureau/Downloads/SecondLife-i686-1.23.5.136262
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgiogconf.so
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
code....
View 9 Replies
View Related
Jul 9, 2010
Sometimes my screen-saver crashes, showing a blank screen with "render error detected ..." message.This message is displayed only short time <1s, then login screen appears.Due to short time, I'm not able to read the complete error message on screen. Is there a way to delay the displaying of such errors so I can read it properly?In the /var/log/messages I have found the following: Code: Jul 9 09:22:33 dc7100 kernel: render error detected, EIR:
0x00000010
Jul 9 09:22:33 dc7100 kernel: page table error
Jul 9 09:22:33 dc7100 kernel: PGTBL_ER: 0x00000010
[code]....
View 9 Replies
View Related
