I have installed Kubuntu (10.10) on top of OSX (10.6) on my MacBook (7.1). When I start the computer, rEFIt asks me if I want to boot on OSX or Linux. When a USB key is plugged in and bootable, rEFIt also asks me if I want to boot on it. However, if I select the USB key, rEFIt still boots Linux on my HDD! What did I wrong?
View 1 Replies
My friend has an older Macbook Pro (circa 2006) and she installed Ubuntu 11.04 on it but the Appleloader wouldn't boot it directly (to boot to ubuntu I had to use super grub disk 2 to load grub2). I never got it to work correctly. She just updated rEFIt and it displays all the icons for windows and linux now, but she can't boot either of them, it just gives her a black screen with a blinking cursor up in the left-hand corner.I suggested the easiest way to fix it would be to wipe everything and start over, but she doesn't want to. I barely know anything about macs and all the triple boot guides I've found are for fresh installs.
View 4 Replies View RelatedFirst up, assume i know nothing about computers. I have a MBP 5,5, and choosing the logo for windows brings up the grub menu, as does choosing ubuntu's logo. I've read a lot saying i need to install GRUB natively under ubuntu, but I've had no luck doing so. can anyone essentially walk me through this step by step? or offer alternatives?
MBP 5,5
OS X 10.6.4
Win 7
ubuntu 10.04
I have a 5,2 macbook pro, and I use refit to boot my ubuntu partition. I do not have an OSX partition on the local drive at all. The only partitions that are on the drive are the EFI, ubuntu and swap. Refit lives on the EFI dos partition.I am experiencing a very long delay on power-on before the system will load refit (probably 20-30 seconds) Once it loads everything is normal.
View 1 Replies View RelatedI got ReFit installed on my macbook but I get two icons: the apple and a grey windows sign. I want the penguin, so any ideas on how to change the horrendous Windows icon to the cute much-wanted penguin?
View 5 Replies View RelatedI have installed reFIT-based triple boot. Here is the partition scheme:1. GPT Protective Partition (GPT and MFT). Mac OS X (GPT and MFT)3. Windows 7 64-bit C: (GPT and MFT)4. Windows 7 64-bit D: (GPT and MFT)5. Ubuntu 10.04 / (only GPT)6. Ubuntu 10.04 swap (only GPT)Windows only supports MFT and thus sees last two partitions (5 and 6) as unallocated space. Can I somehow make it see these partitions to be able to access files from Ubuntu?P.S. I know this is rather Windows problem, but I don't know any good forums where I can ask that, because mostly on these forums the answer is "Why would you need anything but Windows?".
View 8 Replies View RelatedThis seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I'm not the world's biggest fan of rEFIt to be perfectly honest. It doesn't allow me to customize the menu, set a default, etc. I'd rather boot exclusively using grub-efi. Not just that, I'd prefer to be able to do so without needing an hfs+ volume to bless it onto. edit: I can now see that Elv117 has asked this recently. I shall leave this post here in the hopes that someone knowledgable runs across it and not the one further down the page. Also, I'll probably try working through the tutorial to see if I can manage it. I need to evaluate if I really need OS X at all on my MacBook. I think it would be neat to have GPT/Grub2/MacOSX/Ubuntu/Win7 working properly, the way a "modern" computer ought to. Reverting to MBR is just throwing in the towel.
View 7 Replies View RelatedI decided that I wanted to take Arch for a spin for the next week or so (I've had Ubuntu installed for a while) and so I thought the logical thing to do was to erase my partitions and start over with a new live cd...
Well.. that didn't work. I tried to do it from Disk Utility in OS X which succeeded in deleting most everything... EXCEPT grub is still in the mbr (or whatever it runs from through rEFIt). But all I see when I start up in the non-OS X partition is:
Code:
GRUB
At any rate, no Live CDs work, I can't delete the partitions from OS X (including after booting up from the OS X Install disk).
If I hit F1 I can get the "grub>" prompt. But I can't figure out how to launch a live cd. To my knowlege, there's not a "bios" for rEFIt where I can force it to boot from CD, is there?
I have OS X, Ubuntu 10 x64 and Windows 7 x64 installed on my Macbook Pro new unibody. Right now when I choose Windows or Linux in the rEFIt boot menu both options take me to the GRUB menu, and I can boot everything but it's a bit redundant and annoying.
View 9 Replies View RelatedI had my MacBook configured with a triple boot (Windows 7, Mac OSX and Ubuntu 10.04). Everything was working perfectly until I decided to upgrade to Ubuntu 10.10 and screwed everything up haha.
I formated the Ubuntu partition and installed 10.10 on it, but I made the mistake of not selecting the correct place for the boot loader. I went the non confusing way and decided to format the Ubuntu and Windows 7 partition to start all over again.
The problem si this, for some reason rEFIT shows a Linux partition when there isn't any, I just have my HD partitioned like this:
This is what rEFIT shows:
The partitions are empty, I haven't installed any OS yet.
Do you know how can I delete that extra Linux icon?
would putting ubuntu on an external hard drive and booting it from refit work? and would i was starting up my imac 11,2 my ipod was bootable for some reason?
View 1 Replies View RelatedI've used rEFIt and to create a dual boot system on a new MacBook Pro 7. 1 following the directions in the community forum. I can book ubuntu and mac os x fine. However, the MBR boot table shows an error in the partition map.
[Code]...
How can I fix this, rEFIt and gptsync are unable to repair the MBR error... Will this cause problems (since MBR shows the ubuntu boot partition overlapping the OSX partition)?
I have a Macbook 2,1 since 2007. Last week my hard drive just died, so I decided to replace it with a new one, no problems with that. The problem came when I had to install an operative system, because my DVD drive has been broken for a year and a half now. I know we can easily install MacOSX from an external usb drive, but I don't have a big enough pendrive at the moment. So I went for Ubuntu. I have managed to get an Ubuntu 10.10 live usb stick working like charm, if anyone is interested. I just downloaded the latest i386 iso and followed this advice by pxwpxw for the 32bit EFI.
The only thing I had to change in the boot.cfg was the name of the iso and -very important- changed initrd.gz for initrd.lz. The live usb works great. But I decided to do an installation on the hard drive. I installed it using the whole hard drive and didn't get any errors. But when I boot the macbook it doesn't detect anything. I guess I need an EFI bootloader or something to make it work. I've tried to follow this guide but it seems to be intended for someone who already has MacOSX and the Ubuntu installation working. I just want to install a bootloader or whatever I need from the "outside" (from the live usb I'm using). I tried to just throw reFit into the main hard drive's root folder but it doesn't work. I think that maybe creating an HFS+ partition and installing reFit in it may work, but I don't think I can create that kind of partition from the Ubuntu usb and I also need a working MacOSX to run the enable.sh. I've also read of elilo but I've seen that it hasn't been updated for 3 years
I was able to install Windows 7 64 bit and ubuntu 9.10 along with Mac OS X (10.6) to my MacBook Pro 3,1 (Santa Rosa). Some minor issues remain to be addressed, but all three OSs are functional. My question relates to the rEFIt menu where I only see Mac OS X and Windows as available options, unless I happen to have the ubuntu Live CD inserted or my external drive attached which result in Penguin and/or additional Mac icon, respectively. I get to ubuntu or Windows through the Windows icon in rEFIt, then select one or the other from a long menu in grub, with ubuntu set as the default. BTW: The included OS X option doesn't work from here, of course, and I'd like to remove it at some point since I can't use it, but that's even less important at the moment.
I get "Error 15: File not found" when I try "find /boot/grub/stage1" or "find /grub/stage1" from within the grub utility, as suggested by a previous poster as a start to discovering and relocating the grub loader in order to change the boot behavior. Manually I can navigate to /boot/grub, but I am not at all sure if this is the same thing. With everything essentially working, I don't want to trash what I have. But it would be convenient if I could select Mac OS X, Windows, or ubuntu directly from the rEFIt menu. I am not frightened by command line work but have somewhat limited experience and will welcome any constructive input. I saw posts on this topic dating back to 2008 or early 2009, but current topics didn't seem to match up. I'm also new to posting here and ask for you patience if I am not approaching the forum in the correct way or location.
I have installed Debian on my intel iMac, I installed grub first in my root partition and then in the Debian partition. When I boot my Mac, rEFIt brings me to the boot page and shows the Linux drive, but when I choose it, it tries to start up and then gives me the line "Not a bootable drive" and just hangs. How to get this to boot?
View 3 Replies View RelatedI have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI have a Mac Pro 1.1 and am having trouble installing Debian. I installed rEFIt but it won't show my install and live disks at startup. I have very little experience with the command line but would be willing to try. I have installed debian to my pc and used the command line successfully there, but want the OS for my mac.
View 4 Replies View RelatedI am trying to boot a cd on an iMac G3 and I can't get it to boot. (hence the question)
I have tried pressing the 'c' key, the option key, the control key, the apple key, etc, etc, etc.
I have looked around Google and it showed me an old thread on the forums the guy figured it out but he never said what he did.
I downloaded ubuntu not knowing it was totally take over my Mac. I'm nervous it may have deleted everything off my memory and now idk how to get it back! When I start it up it boots with ubuntu only! How do I get it to boot up the Mac os? And did installing this delete everything from my harddrive/partition!?
View 6 Replies View Relatedso i followed the guide to installing ubuntu on my mac i have an core 2 duo processor so i got 9.04 X64 put it on a cd and the cd wouldn't boot at all, so i tried again, and again, and re-downloaded.... not i have tried 10.10 X64, 9.04X64, 9.04X86 and none of them boot past the screen that asks me if i want to install it or whatever, i tried checking for defects on the cd but that didn't even boot.
View 3 Replies View RelatedI don't want to dual as I don't want to screw up my computer. I have a PowerPc mac.
View 3 Replies View RelatedI just installed Xubuntu on my old iMac G3 and I booted it and when I try to log in it says "Authentication Failure" I'm 99.9% positive I'm using the right username/psswrd, does anybody know how to change it or over ride the login part all together?
View 2 Replies View RelatedI installed ubuntu 9.04 but no boot at all (on a powermac G4 cube)
View 1 Replies View RelatedI am trying to put ubuntu an old imac with osx that a former customer gave me. I am not extremely well versed in Apple products but have been doing research intoy current problem. I have tried just putting in the ubuntu shipit disc I have, along with downloading and burning 9.10 text based and have not been able to get it to install. I have tried holding 'c' when rebooting, holding 'option' while rebooting it only gives me the choice of booting from osx), and holding 'control, option, apple, delete' as well to no avail. I then tried downloading Virtualbox and mounting the dmg and found out that my imac is not letting me mount any dmg's at all. Any guidance? Can I take out the harddrive and hook it as a slave to my pc and somehow install ubuntu that way and put it back in the imac? All I want is for the imac to be useful again as I was trying to make it into a stand alone dvd player.
View 4 Replies View RelatedI have a very urgent problem, its so bad I dont know what to do...I tried to install a dual boot, (os x and ubuntu). I could always boot with the Ubuntu CD, but now I can try everything (format whole HD to *free space* ) press "C" at start up, press "alt" and choose "windows" (ubuntu cd) everything does not help even resettingPRAM with alt+P+Rwhat I get is a BLAC SCREEN with blinking underline (always)Does anyone know what I can do to make my mac again able to install a ubuntu, it seems I ahvessed up my irmware..?? I just dont know how? (I once overwrote my MBR according to a thread here... (but I reformated now the whole HD to freespace with GUID partition table.....but still blinking underline when I want to boot the ubuntu 9.1 cd.
View 9 Replies View RelatedOn a MacPro4,1 with two CPUs and an ATI4870 graphics card, none of the ubuntu cds boots correctly. With the latest 10.04 releases (server and desktop) some boot messages appear on screen, but after some USB initialisations everything halts.
9.04 does not even start loading the kernel. Up to now I tried the 32bit variants.
Has anybody here gotten a similar configuration to work, I am talking about a MacPro not a MacBook Pro.
I keep running into things that say "Boot from the live CD" and I'm trying to expand one of my hard drive partitions right now using gparted, and I need to boot from the live cd.... but I can't seem to figure out how to do that.
Is this an easy thing?
I have successfully installed ubuntu on a seagate goflex hd and can get it to boot with using a usb cable and refit on my mac. But I cannot get it to boot with a firewire cable and I have not seen any instructions on how to do this with an intel imac, only a ppc.
The mac does recognize the external hard drive when I hold the option key when I turn on the mac, but I get a "no bootable device found" error once I select it...same thing happens with refit and firewire cable. Any ideas on how to get this to work? I am ok with running it via usb cable, but would like the firewire option.
I have ubuntu 10.04 installed on my MacBookPro7,1 (dual boot with reffit). Everything works fine. Today I closed my laptop and open it later again and saw a black screen with a blinking cursor. I was not able to send any keys to it. So I powered down (off button) it.
After Booting It I saw some kernel message, no errors, and then it stops and everything is freezed. Again no keystrokes can be send. The last kernel message is something about scsi. I tried to remove the "recordfail" in the grub2 menu but it doesn't help.
