On a MacPro4,1 with two CPUs and an ATI4870 graphics card, none of the ubuntu cds boots correctly. With the latest 10.04 releases (server and desktop) some boot messages appear on screen, but after some USB initialisations everything halts.
9.04 does not even start loading the kernel. Up to now I tried the 32bit variants.
Has anybody here gotten a similar configuration to work, I am talking about a MacPro not a MacBook Pro.
I have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI am trying to boot a cd on an iMac G3 and I can't get it to boot. (hence the question)
I have tried pressing the 'c' key, the option key, the control key, the apple key, etc, etc, etc.
I have looked around Google and it showed me an old thread on the forums the guy figured it out but he never said what he did.
I downloaded ubuntu not knowing it was totally take over my Mac. I'm nervous it may have deleted everything off my memory and now idk how to get it back! When I start it up it boots with ubuntu only! How do I get it to boot up the Mac os? And did installing this delete everything from my harddrive/partition!?
View 6 Replies View Relatedso i followed the guide to installing ubuntu on my mac i have an core 2 duo processor so i got 9.04 X64 put it on a cd and the cd wouldn't boot at all, so i tried again, and again, and re-downloaded.... not i have tried 10.10 X64, 9.04X64, 9.04X86 and none of them boot past the screen that asks me if i want to install it or whatever, i tried checking for defects on the cd but that didn't even boot.
View 3 Replies View RelatedI don't want to dual as I don't want to screw up my computer. I have a PowerPc mac.
View 3 Replies View RelatedI just installed Xubuntu on my old iMac G3 and I booted it and when I try to log in it says "Authentication Failure" I'm 99.9% positive I'm using the right username/psswrd, does anybody know how to change it or over ride the login part all together?
View 2 Replies View RelatedI installed ubuntu 9.04 but no boot at all (on a powermac G4 cube)
View 1 Replies View RelatedI am trying to put ubuntu an old imac with osx that a former customer gave me. I am not extremely well versed in Apple products but have been doing research intoy current problem. I have tried just putting in the ubuntu shipit disc I have, along with downloading and burning 9.10 text based and have not been able to get it to install. I have tried holding 'c' when rebooting, holding 'option' while rebooting it only gives me the choice of booting from osx), and holding 'control, option, apple, delete' as well to no avail. I then tried downloading Virtualbox and mounting the dmg and found out that my imac is not letting me mount any dmg's at all. Any guidance? Can I take out the harddrive and hook it as a slave to my pc and somehow install ubuntu that way and put it back in the imac? All I want is for the imac to be useful again as I was trying to make it into a stand alone dvd player.
View 4 Replies View RelatedI have a very urgent problem, its so bad I dont know what to do...I tried to install a dual boot, (os x and ubuntu). I could always boot with the Ubuntu CD, but now I can try everything (format whole HD to *free space* ) press "C" at start up, press "alt" and choose "windows" (ubuntu cd) everything does not help even resettingPRAM with alt+P+Rwhat I get is a BLAC SCREEN with blinking underline (always)Does anyone know what I can do to make my mac again able to install a ubuntu, it seems I ahvessed up my irmware..?? I just dont know how? (I once overwrote my MBR according to a thread here... (but I reformated now the whole HD to freespace with GUID partition table.....but still blinking underline when I want to boot the ubuntu 9.1 cd.
View 9 Replies View RelatedI keep running into things that say "Boot from the live CD" and I'm trying to expand one of my hard drive partitions right now using gparted, and I need to boot from the live cd.... but I can't seem to figure out how to do that.
Is this an easy thing?
I have successfully installed ubuntu on a seagate goflex hd and can get it to boot with using a usb cable and refit on my mac. But I cannot get it to boot with a firewire cable and I have not seen any instructions on how to do this with an intel imac, only a ppc.
The mac does recognize the external hard drive when I hold the option key when I turn on the mac, but I get a "no bootable device found" error once I select it...same thing happens with refit and firewire cable. Any ideas on how to get this to work? I am ok with running it via usb cable, but would like the firewire option.
I have ubuntu 10.04 installed on my MacBookPro7,1 (dual boot with reffit). Everything works fine. Today I closed my laptop and open it later again and saw a black screen with a blinking cursor. I was not able to send any keys to it. So I powered down (off button) it.
After Booting It I saw some kernel message, no errors, and then it stops and everything is freezed. Again no keystrokes can be send. The last kernel message is something about scsi. I tried to remove the "recordfail" in the grub2 menu but it doesn't help.
10.04 was working quite well on my Imac G5 with Yaboot for few weeks.
I tried to boot macOSX which failed and returned to Ubuntu which was stioll booting OK as I did not touch the linux part of the yaboot conf.
But Now It won't boot anymore :
- It seems to boot OK till X launching.
- then I get a Black Screen and None of My PC Keyboard shortcuts can get to another tty.
My Next try is to get a PPC LIveCD and try to see if Yaboot.conf is OK.
I installed Lucid Lynx on my Powermac G5 but mistakenly forgot to uncheck the yaboot boot loader. As a result, my LCD's do not received a video signal from the system until after the boot loader had loaded linux.There seems to be no way to boot back into OS X. I would like to replace the Yaboot boot loader with the original Apple boot loader without having to reinstall the system software and just use the <option> key at startup to select Linux when I need it.
View 2 Replies View RelatedI cannot get ubunto 10.04 to boot on my 1.2 ghz 256 mb ram powerpc ibook g4. I downloaded/ burned the live disc and it worked just fine in my powerpc imac g5 (both g4, g5 were supported I believed)It gets to the screen where I select my image to boot, and that works by it says after failing to load for several minutes: "144.9818211 b43-phy0 ERROR: firmware file "b43-openucode.fw" not found you must go to URL... to download to correct firmware for this driver version".I've gone to the website and found a 43 driver and am not sure how to update/ install it...
the hard drive (30 gb) is shot, kaput. currently no os, though I would like to have a firewire drive with tiger or leopard, and potentially a linux partition if even possible. So here are my biggest questions: can any version of ubunto boot on my ibook from a firewire drive? Can i create a dvd that boots in my ibook that not only has the operating system but also some lightweight application on the dvd so that I can run linux just from the dvd as a toy?I'm not replacing the internal hard drive, it's too costly and not worth it when I have several other working macs running snow leopard already.
I tried installing ubunutu on my macbook pro (7,1 I believe, with lion 7.2 installed) today and ended with result of a nonbooting computer, the ubuntu partition won't boot either! I'll try to explain all the steps.
1. I first installed rEFit.
2. Next I booted from a burned copy of the latest release of ubuntu on a dvd.
3. I created a partition of 5120 mb from the freespace on my harddrive, I made sure to leave the mac partition intact.
4. I finished the install, it said to ejct disc and hit enter, I did, the computer froze. I ended up having to hold the power button.
5. The computer just showed a white screen. It wouldn't boot to the rEFit screen or anything. It just resulted in falling back to lions recovery partion. Disc utility couln't verify ubuntu's or lion's partitions.
where I can find details on how to dual booth OSX 10.6.8, and Ubuntu 10.10 on Mac Mini 2010?
I have the partition already setup for Ubuntu - and have already installed refit - but when I try and boot from the Live CD, the screen goes into power save mode and I can't see anything.
I've installed Kubuntu (9.10 I think) on my Mac Mini 3.1 . So I have an OS X partition and an Kubuntu partition.I got the standard no bootable device message.I cannot boot into OS X (I dont want to get into OSX anyway) or Kubuntu.I booted a rEFIt disc and synced the GPT and partition table.Then I booted onto a Kubuntu live cd to re-install grub into the Kubuntu partition. I re-installed it and tried rebooting. I got the grub menu, but must have missed a setting because it was the grub prompty. So I reboot to try to find the values to put into the prompt (kernel location, initrd location). But when I try to boot into the Kubuntu live cd it freezes just after ISOLINUX appears (only the top line for ISOLINUX shows up).
I tried going back into rEFIt, but it tells me the GPT and MBR are synced and it won't do anything.If I load rEFIt and select linux, it loads to saying no bootable device -- insert boot disk....If I load rEFIt and select the partition tool it tells me they are already synced, if I select Linux after doing that it will freeze with the tux icon in the middle of the screen.It is obvious I need to do the next step which is install Grub, but I can't boot off any live cds! I have tried Kubuntu, System rescue cd, gparted live cd, os x install cd, an osx corialis boot cd I made, an older Kubuntu CD. They all freeze just after ISO Linux starts up or the OS X ones give me a do not enter sign.
I might be going Back To linux after i relearn a bit and understand it more. Now i need to understand something first, How can i get Linux to boot with EFI and not Emulated BIOS?
View 2 Replies View RelatedI can't install any flavour of Ubuntu 9.10 onto my new iMac G3. Here are its specs:
iMac G3 New World (Indigo)
350MHz G3 Processor
192MB RAM
6GB Hard Drive
Slot Loader (CD only - not DVD)
Mac OS 10.3 Panther
The drive does work - I've played music from CDs on it, and it does allow me to view PDF files stored on data CDs. I can even view the Ubuntu CD through the Finder on the desktop. It just really doesn't want to boot from the CD.
I've tried multiple Linux distributions (all of them PPC compatible).
Model:MacBookPro1,1
Intel Core Duo 2,16 GHz (32 bit)
OS X 10.6.2
Boot ROM-version: MBP11.0055.B08
SMC-version (system):1.2f10
2 gb ram
I've tried this guide: [URL] to USB Stick
with both the standard 9.10 32 bit cd and the netbook remix. when I try to boot and hold alt the only partition that appears is the os x one. so no usb.
the cd reader is broke. that's why I'm trying via usb.
edit: its a usb stick btw, 16 GB that I'm trying to boot from.
I want to install Ubuntu on a PPC iMac.It is running 10.2.8.I'm looking for a ppc version of Ubuntu that will fit on a CD-R, the iMac has no DVD reader.Where can I find this?Also, I'm not sure how to get the iMac to boot from disc. It doesn't seem to respond to holding 'c'. Also, when I hold 'option' during boot up it shows me a screen with a picture of a lock, it wants me to fill in a password, but my user's password won't work.
View 9 Replies View RelatedI'm trying to reinstall Mac OS X on a single boot Linux powerbook, but have no idea what to do because to my understanding ubuntu wont read a .DMG file, does this means that I have to burn it? Or maybe convert into an .ISO and then burn? Or can it be done from within the machine from an .ISO?
View 7 Replies View RelatedI downloaded and burned the 32-bit desktop edition of Lucid Lynx (ubuntu-10.04-desktop-i386.iso) but can't boot it on my MacBook model 5,2. I've installed rEFIt. When I boot from the CD holding down the C key on hearing the boot chime, Ubuntu doesn't boot. A purple background with a keyboard and the accessibility icon shows up, then the screen goes black with a blinking underscore at the top left corner. After a little while, the marker disappears and the screen goes black. After that, nothing happens. I left my MacBook that way for a couple of minutes, but still nothing happened. Any clues about what the problem may be? Should I wait longer at the black screen? I burned the CD at low speed (16x) and verified the disc after burning.
View 1 Replies View RelatedI'm currently trying to mount a hfs partition at boot as part of my quest to have a shared music folder across ubuntu and OSX. Here's the output of fdisk -l
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
[code]...
i am attempting to setup a macbook run by os x 10.5 for dual boot with ubuntu 9.10.
however, when get the part where usually a gui interface which allows one to specify the size of the new ubuntu partition appears i only get the options for using the entire disk, the largest free space or manual partition.
how can i set this machine up for dual boot?
I've recently wiped by hard drive of mac osx and installed ubuntu. My problem is that i have no proprietary drivers and i cant get internet (wired and wireless) to work. I was wondering if this problem could be due to the fact that i dont have drivers for my ethernet.
I also had a slight problem when installed ubuntu. The install itself when through fine, but after completion, i received a prompt saying that I needed to restart. after clicking ok to restart, i received a string of error, and my cd ejected. when i retstarted after that, ubuntu loaded fine, but no wired or wireless internet for me.
I've reinstalled a few times and i have the same problem. Everyone i talk to says its strange that ethernet doesnt work.
I've been using Ubuntu on my PCs and laptops for quite a while. Recently, I've been allocated a Mac for use in my lab. It is a PowerPC G5 running on Mac OS X 10.4.11. I've installed Ubuntu on one of the two hard disks available, the other one being the disk which Mac is installed in. There was no problems with the installation, but I cannot get Ubuntu to boot. Basically, when I restart the system, it boots into Mac straight away.
There is no boot loader or GRUB. I've tried holding down the options key when the system starts, but for some unknown reasons, the monitor cannot find a signal, so I cannot see what is going on. The monitor can only pick up a signal after Mac starts to boot (or, when I was installing Ubuntu, after the virtual Ubuntu has loaded). Am I suppose to expect GRUB or some other boot loader?
I presently have an iMac G4/700Mhz machine I want to try Ubuntu on, but I cannot get it to boot using the 10.04 PPC Live CD. I get to the boot prompt, and no matter what I type, the system halts when the screen clears and comes up, and each time it does so, it comes up different colors (I've seen green, red, yellow, and grey so far). I've tried the special boot arguments that apply to this system when you press the TAB key, and all of them end the same way, so I'm at a wee bit of a loss here.
View 5 Replies View Related