Ubuntu Installation :: Dual Boot On An Old Ibook G4 On A Ext Fw Drive?
Mar 30, 2010
I'm running into some difficulties installing Ubuntu on an old mac ibook G4 I was given. sepcs are fine (1. something Ghz processor, 700mb RAM)--yet the internal drive and CD player are dead. I installed MAC OS 10.4 PPC on a firewiredrive and boot from there. But how can I install Ubuntu ? I understood that I need to use the non supported PPC version which I downloaded and have burned a CD of. I have an external CD player which works. The Cd's appears in the firewire mac os, and the external FW disk still has 200 Gigs free.I plan to let the instaler choose this freespace to create the partitions, but how do I get to the installer ?
When i boot with the CD in the drive and press C, nothing happens. when I press options / alt, ubuntu the ubuntu install CD doesn't show up I've read that I must use open firmware, and found some key combination, but this doesn't change anything (command, option O F). I have Gparted if the 200gig partition needs to be repartitioned. I'm trying to install Ubuntu as a dual boot on this old ibook G4
View 6 Replies
ADVERTISEMENT
Sep 23, 2010
I have an old iBook G3 12" Dual USB (M7692LL/A) with 128Mb extra of RAM.
I was trying to boot Ubuntu from an external USB DVD and a FW CD drive, and the same thing happened. When I select the disc from the boot select screen and press enter, the colors get funky and it stays like that for minutes!
View 4 Replies
View Related
Sep 20, 2010
I would like to use the VGA-Port for Beamer in "Mirror" Mode how to modify the xorg.conf? I am not familiar with linux configuration.
View 2 Replies
View Related
Apr 26, 2010
I am currently using an Eee PC 1005HA with Ubuntu installed. I'd like to dual boot with Windows XP. How can I do this without a CD drive? I have an external hard drive that I used to install Ubuntu in the first place and a Windows XP install CD with key.
View 9 Replies
View Related
May 18, 2011
I have my computer set up with 2 40 GB drives (IDE) and 1 500 GB(SATA). One 40 GB drive for Windows XP, 1 40 for Ubuntu and the 500 GB for storage for both (formatted NTFS).
I am building a computer for my wife and want to use 1 80 GB IDE drive instead of 2 40s and a 320 GB IDE for storage (the storage drive is irrelevant to my issue). These are all parts I have laying around. I installed XP and partitioned the 80 gig into 2 40 gig partitions during the installation.
When I go to install ubuntu, it shows me all the partitions of both drives but gives me no option (other than manual) for using the 2nd half of the 80 gig for installation.
I need to know how to set it up manually. It gives me a slider to divide the 2nd half of the 80 GB drive into 2, but I don't know what size to make them. Also when I look at my 40 GB drive from my computer it show 3 divisions: "39 GB ext4", "ext 1.7 GB" and "1.7 GB swap space".
View 5 Replies
View Related
Jun 30, 2010
The thing is i want to have windows xp on my internal drive and ubuntu on the external. Not very hard but i want it so that i can choose what to boot when i start my computer and i also want to store other things then ubuntu on my external drive so i can use it in xp also
The reason i want ubuntu for is to use it while watching movies or chatting osv and use xp for games and my animation programs since they tend to be quite hard to get to work on ubuntu.
View 2 Replies
View Related
Jan 12, 2011
i installed Ubuntu 10.10 on our second hard drive, and i cant dual boot it. it is set as slave, so should i set it to master, or do i need to hit a key @ initial boot. ive gotten a list that shows vista on it, which is on C: , but not ubuntu, which is on F:.
View 9 Replies
View Related
Dec 5, 2010
I am not smart enough to figure out how to install Fedora 14 correctly. I have an older computer with 2 20gb drives. On the first drive (sda) I have Windows XP, and on the 2nd drive (sdb) I am trying to install Fedora 14. The catch is that I would like to put Grub and the MBR on the first drive so that when the computer boots, it asks whether to load Windows XP or Fedora. I know I have done it with Fedora 13 in the past, but have forgotten how to do it. How to accomplish this in Anaconda for Fedora 14?
View 2 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jun 22, 2010
Edit: I have a Sony Vaio FJ170 laptop with Phoenix BIOS version R0060X6 & a broken DVD Drive. The BIOS doesn't support booting from USB (it does have 'External Drive Boot' option, but my USB stick doesn't get listed under boot devices in BIOS when connected to the laptop).
A few days ago I upgraded to Windows7, then installed Lucid through WUBI. With the help of another thread of mine (here), I changed the default boot option & timeout of Windows to zero to directly boot into Ubuntu. So far it was good. But recently I tried to get back to Windows for some reason but could not succeed as the F8 key no longer brings up the Window's Advance Boot Menu.
Is there another way to restore the dual boot menu timeout to get back to the Windows installation. Or even better, is there some way to make a fresh install of Windows & Ubuntu side-by-side without DVD drive. I am only 14 and absolutely new to Linux. The network booting methods given on the Internet were too complex for me to understand. I like Ubuntu but also need Windows for programming C++ & Photoshop CS4.
View 9 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 26, 2010
New gateway laptop with a 330M nvidia card and windows 7. I partitioned the drive and made a dual boot with the 64bit 10.04. Everything seemed to be running fine. I installed the recommended drivers for the nvidia card (and also ran an update). I rebooted. Now I get the same thing whether in recovery mode, normal boot or even to a liveCD, first ubuntu with the five dots (with an odd green halo around them) then a few screens flash by and then blackness.
None of the f keys do anything, nor does holding shift during the boot and ctrl+alt+anything does not have an affect except ctrl+alt+delete will shut down still. Once in my frustrated button bashing I did somehow get a stretched out window saying there seems to be some graphics problem, from there I did get to a somewhat normal looking desktop. I didn't to do anything then, foolishly thinking I could do it again in the future (for some presumably unrelated reason I could not get online = no updates and no Internet help) I haven't gotten back there since.
View 8 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
View Related
Apr 21, 2011
I tried unsuccessfully to install what I thought was windows in a virtualbox. After a ton of reading, I realized I don't actually have windows, but the Toshiba recovery discs that have windows on them. I was initially able to run Mint within Windows, but what I would rather do until I can buy windows (bleh) is dual boot. Will this recovery software allow me to partition the hard drive?
View 3 Replies
View Related
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Feb 1, 2009
After going back & forth between win7b & F10 installs, I can't get both to live on the same hard disk for dual booting anymore. win7 complains about fedora's GPT disk being unacceptable for installation. win7 blows away fedora's GPT partitions when it installs. Fedora doesn't recognize win7 partitions when it installs. I can't specify exact partition boundaries with windows even if I know what they are, and I can't seem to find any info how to do it in parted either. I have win7 installed in partition 3 in a known location on disk, but if I reinstall f10 (again), it's going to blow away the win7 boot data on the disk. How do I tell grub where to find the chainloader thingy? Can that still even be used? win7 no longer uses ntldr, and I haven't found an updated procedure for this new boot method.
View 4 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
Mar 24, 2015
I've set up a dual boot system with Debian and Windows 8, both installed on their own drive, with their own boot partition. I installed eveything in UEFI-Mode with fast- and secure boot turned off. Both installations are working, as I can access them by changing the boot priority in the Bios. What I cannot achieve is to let grub boot my windows installation.
This is the output of parted -l:
Code: Select allModel: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 512MB 511MB fat32 boot
2 512MB 111GB 111GB ext4
3 111GB 128GB 17,0GB linux-swap(v1)
[Code] ....
As you can see, my linux install is on sda, my windows install on sdc (sdb beeing a data disk). This is the entry I made in the 40_custom file in etc/grub.d:
Code: Select allmenuentry "Windows 8.1" {
insmod part_gpt
insmod chain
set root='(hd2,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
boot
}
I think this should be fine, but if I choose the windows entry wehen grub is booting, it says: error: no such partition. It's my first debian installation, and I am stuck here. Not too much of Linux experience in general.
View 12 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Dec 17, 2010
I recently installed another Linux on my USB drive. All works well and can boot into Ubuntu or PeppermeinOS. However, the system will not boot at all unless the USB is plugged in.
View 3 Replies
View Related
May 30, 2010
I have a DELL Latitude E6410 64bit with Core i5. My goal is to have my Windows 7 encrypted and my Ubuntu 10.4 unencrypted and to be able to boot them both. So here are the details. I installed windows 7 first. Then I installed Ubuntu and Grub was in the MBR. Then I started TrueCrypt 5 from Windows 7 and encrypted the system partition, not the whole drive! So the TrueCrypt loader overwrote the GRUB in the MBR. Now when I start my computer, I see the prompt for password from the TrueCrypt boot loader. If I enter my password, windows is loaded.
The other option at the beginning is to press Esc and that should offer me other boot loaders. Well, on my DELL there's this Recovery partition and it boots immediately. How I can integrate the Grub in the process. I know, that there are many howto-s on the internet about this problem, but I haven't found a solution for grub2 and windows 7! It is indeed different, because GRUB does not have menu.lst any more and Windows 7 does not have boot.ini!
Here some more info about my partitions:
Code:
/dev/sda1 fat16 DellUtility
/dev/sda2 ntfs RECOVERY
/dev/sda3 unknown
/dev/sda4 extended
- /dev/sda5 ext4 ubuntu
- /dev/sda6 linux-swap
Windows 7 in installed on /dev/sda3 and is encrypted, that's why the file system is unknown.
Ubuntu 10.4 is installed on /dev/sda5
I know of three options to deal with the problem:
Solution 1
Install GRUB to the PBR (partition boot record) of the linux partition - that's /dev/sda5 in my case. Then, it should be possible to load GRUB when you press Esc in the TrueCrypt boot loader.
solution 2
Make Windows load Linux. Copy the PBR of the linux partiotion to a file and copy the file to windows. Then add an entry in the windows loader to include the linux loader file.
solution 3
Make GRUB load TrueCrypt's boot loader. Make a backup of the MBR (containing the TrueCrypt's loader). Add Truecrypt's MBR as a chain boot loader in GRUB. Finally, rewrite the MBR using this new GRUB.
I did install GRUB to my PBR with
Code:
from the live CD:
first mount /dev/sda5 to /media/ubuntu
sudo grub-install --root-directory=/media/ubuntu /dev/sda5
I also tried with
Code:
from inside ubuntu:
> grub
grub> find /boot/grub/stage1
hd0,4
grub> root (hd0,4)
grub> setup (hd0,4)
grub> quit
After one of these, I am able to boot my ubuntu after restart. But then I reboot and load windows, reboot once again and press Esc in order to try to boot ubuntu again, and then I don't see the grub loader list, but the "grub> " shell prompt instead! I thought that I will be able to see the grub loader also after many restarts, not just the first time. Why this configuration "breaks" after 1-2 reboots? Maybe the problem is that my ubuntu is on an extended partition (sda4)?
View 3 Replies
View Related
Mar 28, 2010
Old Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Jan 3, 2011
Win-7 Ubuntu Dual Boot, Drive Presence Issue I recently built up a new computer and set it up for dual-boot with Win7 and Ubuntu. Initially I had some issues with the boot management but I discovered that GRUB works well and Paragon's Partition Manager does not. I reloaded Ubuntu using GRUB and got the system working exactly as I would like it to. Several weeks later I volunteered to assist my brother-in-law's family with getting their Unbutu system working properly with a new Brother MFC295CN printer. I brought the printer home so that I could work with it on my system.
I did get the printer to work correctly but in the process I had to reload Ubuntu because I made a few mistakes on my way to success. When I reloaded Ubuntu, I accidentally loaded it onto my system's second drive, drive F. Before, I had Ubuntu in a partition on drive C. Ubuntu works from the F drive and GRUB allows me to boot either Win 7 or Ubuntu, as desired. I will note that the earlier version of Ubuntu on drive C has been removed although the partition is still there. GRUB shows entries for this second copy of Ubuntu along with Win 7 and the entry for the functioning Ubuntu OS.
Here's where I am getting into trouble. Initially, everything looked fine. Win 7 worked, Ubuntu worked. Then, after a reboot to Win7, I noticed that my F drive was missing. I searched all around the system controls, tried loading new hardware, etc, etc, but the drive did not show up anywhere. Rebooting into Ubuntu showed that the drive was in fact still there and all the date in the large data partition was still there. Using Ubuntu's partition manager I discovered that the data partition was not enabled. I enabled the partition and rebooted back into Win7. No go.
The F drive was not present. My next step was to try Paragon's Partition Manager software, which I have a paid-for copy of. It would not see the F drive either. Using the Paragon recovery disk I had made earlier with the Paragon software, I restarted the system. The recovery software saw both drives correctly and the partitions were set up correctly. I ran the boot corrector software but I did not mess around too much as earlier experience had indicated that some of the Paragon features do not work well with Ubuntu. I shut down and rebooted into Win7. Success! The F drive was there.
But later, when I restarted the system the F drive was gone again. I tried a few things then rebooted using the recovery disk again. As before, on the next restart the F drive was present. I didn't take the time to reboot the system twenty times, but it seems apparent that something in the boot records is preventing Win7 from seeing the F drive correctly unless I boot from the Paragon recovery disk and then boot Win7.
No knowing a lot about what goes into a boot record and how either GRUB or boot.ini manage things, I am at a loss as to why I'm seeing this inconsistency with the F drive. A probable solution would be to remove both the second (old Ubuntu) partition on the C drive and the Ubuntu partion on the F drive and reload Unbutu all over. This would put me back to where I was in the beginning. However, this seems a bit inelegant as all the other attributes of the system are working well, is there a better way to address the problem?
View 3 Replies
View Related
Jul 3, 2011
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
View 3 Replies
View Related
Sep 1, 2010
I have ubuntu 10.4 installed in xp. Ubuntu tells me I have 50 gigs HD space yet the folder tells me I only have 700 mgs and I am getting a warning of not enough space on the computer. My question is. Is this due to windows claiming the space and not allowing enough to be used by ubuntu? If I delete windows and make this computer all linux will that help?
View 2 Replies
View Related
Apr 3, 2011
I have a dual boot laptop Ubuntu 10.10 + Windows XP. When browsing my Windows C Drive in Ubuntu I decided to create a share to the windows "my documents" folder. The problem is that the windows drive is not automatically mounted at launch of ubuntu and as a result I get the following errors:
Code:
Could not find "/media/14F0AD48F0AD30C2/Documents and Settings/Lucas Redding"
and a search box is launched (See Attached Image).
I have tried to look at the Samba and Nautilus settings but I am unable to find any that automatically mount the windows drive.
View 4 Replies
View Related
