Ubuntu / Apple :: Get Wireless To Work With Live CD 10.04 On PB G4?
May 17, 2010
So I have been testing out the Ubuntu Live CD 10.04 on my PowerBook G4 and most everything seems to be working fine (with the exception of wireless and the dim/brighten buttons.) When connected to the internet via ethernet cable, I was able to download the broadcom hardware (I guess needed to make wireless work??) This is pictured below. However, even after the hardware thing was activated, when I unplugged the ethernet cord and clicked on the icon for wireless internet under wireless, it says, "Device not ready." Can you get wireless to work with the live cd?
View 5 Replies
ADVERTISEMENT
Feb 25, 2010
I have been using the information provided here: [URL] to fix some issues after installation of Karmic 64-bit on a MBP 5,5. The solutions for wireless and sound work, but not together - one seems to break the other. Here is what I did:
1. Followed directions for fixing wireless here: [URL] (AirPort) This works fine.
2. Followed directions for fixing sound, which seems to update the kernel, here: [URL] Sound This also works, but then wireless does not work.
If I boot into the older kernel version, I have wireless again, but no sound. If I boot into the newer kernel and try to use the wireless solution above its says I already have that package installed - yet no go with wireless.
View 1 Replies
View Related
Dec 28, 2010
With Ubuntu 10.10 live cd Lan and Wireless work fine but when installed on Hardrive Lan and wireless fail to work.
View 2 Replies
View Related
Jun 12, 2011
Per the HowTo post a Wireless Issue Sticky, I have included the information in the 10 steps below.Here is the description of my problem: I am getting back into Linux after purchasing a new PC (have not owned one personally for several months). I purchased an HP, as I've had personal success with them. It is an HP Pavilion g4 Notebook.When I booted the Live CD, I was pleased that wireless just worked.However, after installing, wireless does not work.The Additional Drivers Tool appears to recognize my wireless card;however, when I attempt to active the driver, I receive an "installation failed" dialog.ere are two screenshots:And here are the results of the file from the second screenshot:
Code:
2011-06-12 11:04:58,837 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[code].....
View 9 Replies
View Related
May 10, 2011
I'm considering installing Debian on my Toshiba A660 laptop but I want to be sure the wireless connection will work. I have Windows 7 on it already on it and it has a Broadcom 802.11n Network Adapter. Is there an easy way to set up a wireless connection and will it work on a live CD to test it?
View 3 Replies
View Related
May 7, 2011
Neither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
View 1 Replies
View Related
Apr 22, 2010
This morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
View 4 Replies
View Related
Apr 22, 2011
I've got an old iMac g3 on which I'd like to install Ubuntu Dapper Drake.Here's the problem:I insert the disk in the computer.Keep pressing "C" till this comes out:Quote:"The default option is "live" bla bla bla but in case of problems use "Live video=ofonly"I write "Live".The orange progress bar appears, but the the screen becomes black.I still can hear sounds: the classic ubuntu log-in music, but I can not see anything: I guess the live has started, but the screen is just black.By pressing CTRL-ALT-BACKSPACE I'm able to come back to shell.
Once rebooted, I try "Live video=ofonly".Again the orange progress bar, but then this message comes outQuote:"Failed to start the X Server, It is likely that is not set up correctly. Would you like to view the server output to diagnose the problem?"Even if I dont select anything, some random words appear in the screen, too fast for me to read them.Then I'm back to shell.I read here (that the problem is caused by Xorg and that the solution can but editing his configuration by using Quote:sudo nano /etc/X11/xorg.confBut I just don't know when to do that: Ubuntu is not installed yet and there is only MacOS 9.2 on that machine.
View 2 Replies
View Related
Jun 9, 2010
I keep running into things that say "Boot from the live CD" and I'm trying to expand one of my hard drive partitions right now using gparted, and I need to boot from the live cd.... but I can't seem to figure out how to do that.
Is this an easy thing?
View 9 Replies
View Related
Aug 11, 2010
I am writing in order to find information on making a Live USB with Ubuntu with a Mac.
I have a laptop that Im going to install Ubuntu but I cannot use it to make the Live USB for various reasons.
In the past, I used on my laptop the "Unetbootin" software to make a Ubuntu Live USB and it did worked well. Now, I just realized that Unetbootin can only be used with Linux or Windows so I would really appreciate if someone could provide information and maybe name a software that could be useful to me to do this task.
View 2 Replies
View Related
Jan 13, 2011
trying to test out ubuntu 10.10 on my G4 mDD 1.25GHZ 2GB RAM and am able to boot the ISO file from disc and then get to the screen where you type in all that live-nosplash stuff and have tried all the diff combos with like video=ofonly and stuff and can't seem to get it to work. I've gotten as far as seeing the purple ubuntu screen with the white dots and then the screen blacks out and then i hear the ubuntu chime.
View 2 Replies
View Related
Jan 15, 2011
I'm going to create either a live CD or USB to demo Ubuntu on my Intel Mac Mini. I'd be doing this only to test one piece of software under Linux.
Is it possible to run the software from my live CD or USB just as I would running Linux (thus, without the need for the software to be installed on a HD)? If so, where do I need to save the software file(s) when creating my live CD or USB?
View 2 Replies
View Related
Feb 21, 2010
I can't install any flavour of Ubuntu 9.10 onto my new iMac G3. Here are its specs:
iMac G3 New World (Indigo)
350MHz G3 Processor
192MB RAM
6GB Hard Drive
Slot Loader (CD only - not DVD)
Mac OS 10.3 Panther
The drive does work - I've played music from CDs on it, and it does allow me to view PDF files stored on data CDs. I can even view the Ubuntu CD through the Finder on the desktop. It just really doesn't want to boot from the CD.
I've tried multiple Linux distributions (all of them PPC compatible).
View 9 Replies
View Related
Mar 16, 2010
I decided that I wanted to take Arch for a spin for the next week or so (I've had Ubuntu installed for a while) and so I thought the logical thing to do was to erase my partitions and start over with a new live cd...
Well.. that didn't work. I tried to do it from Disk Utility in OS X which succeeded in deleting most everything... EXCEPT grub is still in the mbr (or whatever it runs from through rEFIt). But all I see when I start up in the non-OS X partition is:
Code:
GRUB
At any rate, no Live CDs work, I can't delete the partitions from OS X (including after booting up from the OS X Install disk).
If I hit F1 I can get the "grub>" prompt. But I can't figure out how to launch a live cd. To my knowlege, there's not a "bios" for rEFIt where I can force it to boot from CD, is there?
View 4 Replies
View Related
Mar 31, 2010
I know, it's a common Problem but I just can get it right. Im pretty new on Linux and some Commands confuses me a lot. Though, I managed to made me a root account to read any files on both HD. But I still cant write on the external HFS+ formatted HD. ReadOnly Filesystem. I cant set up an internet connection in order to install files. Is there some workaround?
MacBook 5.1, Live-CD Ubuntu 9.10, external HD via USB
View 2 Replies
View Related
Jun 7, 2010
First things first, you will need:1GB or larger flash drive rEFIt (Link at the bottom) A linux installation, virtual machine, or live cdA Mac OS X installation/installation disk Administrator permissions gparted (comes on most linux live cd's) hfsplus/hfsprogs for hfs+ support in linux Alright Step one (in linux):Format your USB key with an MBR partiton table. Add an 8MB ext3 partition named "GRUB" for simplicity. Add a 16MB hfs+ partiton. Use the rest of your disk as FAT32. Step two (also in linux):Mount your ext3 GRUB partiton Open terminal and do "sudo grub-install --root-directory=<mountpoint> /dev/myusb", of couse replacing <mountpoint> with the mount point and myusb with the correct sdX. If you get an error saying that there is no bios boot partition (which you shouldn't), open gparted and select the grub partition and select the flag "bios_grub". Close GParted if it is open and reopen it.
Set the boot flag on the GRUB partition. Copy all of the contents of your live cd iso or cd (including the hidden folder ".disk") to your fat partiton. Skip the following steps in the step two if you don't want persistence In terminal create a zero'd out file called casper-rw in the fat partiton with "dd if=/dev/zero of=/media/LIVE/casper-rw". Replace the /media/LIVE with the mountpoint again.
Now type "mkfs.ext4 /path/to/casper-rw" and follow the instructions if there are any Step three (in mac):Open the rEFIt dmg and copy the "efi" folder to the hfs+ partiton. Locate the file called "enable.sh" in the efi folder Open a terminal and type "sudo " and then the path to the enable.sh. (You can find it by dragging the file into the terminal) Step four:Reboot your computer holding the option key Select rEFIt on your USB drive (If it doesn't appear take it out and plug it back in or boot all the way up and then reboot again) Select "Linux on HD" that has a picture of a flash drive on it. You will now be at the GRUB prompt, so type the following:
Code:
root (hd0,3)
linux /casper/vmlinuz boot=casper persistent
initrd /casper/initrd.lz
boot
Of course take out the persistent part if you didn't use the persistence file. [URL]
View 9 Replies
View Related
Aug 15, 2010
I presently have an iMac G4/700Mhz machine I want to try Ubuntu on, but I cannot get it to boot using the 10.04 PPC Live CD. I get to the boot prompt, and no matter what I type, the system halts when the screen clears and comes up, and each time it does so, it comes up different colors (I've seen green, red, yellow, and grey so far). I've tried the special boot arguments that apply to this system when you press the TAB key, and all of them end the same way, so I'm at a wee bit of a loss here.
View 5 Replies
View Related
Sep 1, 2010
I am using osx on my macbook wanting to create a bootable ubuntu usb pendrive so that i can install ubuntu on my hp laptop. Is anyone aware of any similar tools for osx such as Unetbootin?, or how i can go about creating a bootable live usb.
View 1 Replies
View Related
Sep 18, 2010
I'm trying to boot ubuntu10.4 live CD on my new iMac (iMac 11,2, core i3). The screen goes black at start of boot and stays black. The CD stops reading after a few minutes and that's that. Just to see what else doesn't work I tried ubuntu10.10 beta live DVD. That boots the splash screen - already better than 10.4 - and gives the language menu and the boot option. The boot starts and some text scrolls up the screen quickly. Then the screen goes black, etc. Tried to set boot option vga=771 - no good. Boot option nomodeset - no good. Booting suse11.3 live CD also gives scrolling text and a black screen. All these discs worked on my old Mac Mini Solo (2006). Looks like something's different about booting a live CD on the new iMacs. Anyone else trying this?
View 6 Replies
View Related
Jun 2, 2011
I have a 20" 2.0 GHz iMac G5 Rev B and I'm trying to boot the live CD on it. I used to have a small ubuntu partition before on this computer, but I repartitioned it to OS X only when I left it as a family computer. I had no problems with it back then (I think it was 10.04). I've tried booting with several options. Booting by typing in live or live-powerpc64 get the computer to a blue screen with the top bar and cursor, before the cursor stops moving, the computer freezes, and the fans kick up to full. Trying with video=ofonly gets the new left bar thingy to show but freezes as soon as I try to click anything.
View 1 Replies
View Related
Jun 12, 2010
I have a serious problem! I downloaded and burnt Ubuntu 10.04 and then chose it as start up volume in Snow Leopard's start up disk preference dialogue and although Ubuntu runs successfully from the cd (I'm typing from it now) I can no longer boot into OS X at all.
I have tried all of the different short cuts at boot up to no avail, even trying 2 keyboards. It insists on looking for the Ubuntu disk and if it is not in the drive comes up with an error message stating that a system disk cannot be found.
Is there any kind of tool on Ubuntu that will let me change the start up disc/interact with the Mac's efi settings? I previously had refit installed but this disappeared just before I booted the cd, is it worth using the live cd?
I tried booting from a Tiger dvd but it wouldn't let me do so, it just returned me to the ominous "System disk not found" message.
Does anyone have any kind of idea? Perhaps some kind of shell script that will reinstall refit? I'm guessing that any kind of dvd designed for PC will prob boot, any kind of OS X recovery disk compatible with MBR available?
View 7 Replies
View Related
Sep 1, 2011
I have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies
View Related
Jul 22, 2011
i got 2 live cds with 5 distros on each. i decided to test the distros on my macbook but I couldn't boot from the Live CD using reboot and holding down "c", so I selected the Live CD as my startup disk. so i experimented with fedora, tested mint, and played with pradus.
View 1 Replies
View Related
Jul 24, 2010
I am having trouble finding a live cd to install on an apple g3 ibook. I have 256 mg ram, and want to erase hard drive and install linux. How can I find a live cd to install. I am thinking about debian or slackware.
View 2 Replies
View Related
Nov 18, 2010
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies
View Related
Jul 27, 2011
I am as much of a noob as you could be. I have trying to install ubuntu for 2 days now, I have tryed several versions and several of mint, but I always get this message ending with 'Unable to find a medium containing a live file system' when I start the installation process from the disk.
View 2 Replies
View Related
Apr 26, 2011
I'm on a Macbook 7.1, and I got that every time I tried to boot Linux off a CD & tried to install it.
View 3 Replies
View Related
Jul 3, 2011
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
View 1 Replies
View Related
Oct 18, 2010
How can i get Apple TV to work on Ubuntu? Besides using Wine .
View 3 Replies
View Related
Apr 5, 2011
Does anyone know if ubuntu 10.10 will work on an imac g4?
View 3 Replies
View Related
