Ubuntu :: Any Way To Force Set Resolution?
Apr 9, 2011
I am trying to force a resolution (800x600) through xorg.conf. How to do that? The story is the following. I am trying to play a game (theocracy) on my toshiba nb100 (max resolution (1024x600) however the game supports only 800x600 resolution. To play I am using xgame [URL] which has the option to use a separate xorg.conf file to run the game. Even though I created a new xorg.conf1 file which only contains in its "screen" section Modes "800x600" notwithstanding the new screen, with the game is set to 1024x600. How to force 800x600 through the xorg.conf.
View 9 Replies
ADVERTISEMENT
Mar 27, 2010
So my monitor (a 19" acer) has a native res of 1440x900, which is not detected in display settings. How do I force the resolution to that?
View 2 Replies
View Related
Dec 16, 2010
I have my Xubuntu box connected to a 1920x1200 LCD monitor via a KVM switch. If the KVM is set to the Xubuntu box when I boot, all's well, but if the KVM is set to the other machine, Xubuntu boots into a 800x600 resolution. This behavior started with Maverick, when I was running Lucid. the correct resolution was set no matter the position of the KVM switch. Is there some place in Maverick that I need to set the resolution to 1920x1200 so it is set correctly regardless of the KVM?
View 1 Replies
View Related
May 11, 2011
I recently started using Ubuntu 11.04. Everything works fine with my monitor directly connected to the computer. I get a default screen resoluton of 1680 x 1050, which is just fine.
However, when I connect the screen through a video splitter to be able to use a beamer, the screen resolution defaults to 1024x768. Moreover, Ubuntu then detects an unknown monitor and I cannot select a higher resolution.
I searched for modifications of xrandr en xorg.conf but I have to admit I don't understand what I've read. So my question remains: how can I force Ubuntu 11.04 to start with a screen resololution of 1680 x 1050 (without first connecting monitor only, that is).
I hereby add some information I retrieved with the screen connected without the splitter, so you can see what hardware is involved.
Code:
dirk@LaboFysica:~$ xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+
1280x1024 75.0 60.0
[Code].....
View 9 Replies
View Related
Oct 1, 2010
I upgraded from 9.04 to 10.04.1 so I am still using legacy grub.Anyway, I noticed with the update that the console is using the framebuffer and using VESA for high resolutions.I really don't like or want this feature. So I added vga=0 to get 80x25 and it works initially but just when the X server is running (Xubuntu in my case) I can see how the console switches to a high resolution again. After this, if I go to a console, lets say tty1, it is using again a high resolution instead of 80x25 (VGA). Is there a way to force the consoles to be in a lower resolution and keep it that way? It used to work fine in ubuntu 8.xx and 9.xx
View 2 Replies
View Related
Jun 30, 2010
My monitor's dvi jack is damaged so my nvidia geforce 210 does not recognise the supported resolutions correctly.
result: while it actually can support upto 1440x900, the highest available resolution is 1360x768.
While on windows, i used the nvidia utility to add the custom resolution and everything was nice.
On ubuntu 10.04, i haven't found a way to do that yet. yes, i searched forums, tried a couple of things with the xorg.conf file and lxrandr, etc. but to no avail.
I did manage to get the resolution listed in ubuntu's own display manager, and it shows 1440x900, but it doesn't apply when i hit 'apply'.
The nvidia settings manager does not show the resolution.
View 2 Replies
View Related
May 4, 2011
I started using Ubuntu 11.04 today.
Everything works fine with my monitor directly connected to the computer. I get a default screen resoluton of 1600 x 1280, which is just fine.
However, when I connect the screen through a video splitter to be able to use a beamer, the screen resolution defaults to 1024x768. Moreover, Ubuntu then detects an unknown monitor.
I recall that I have solved this problem before with an older version of Ubuntu.
Now it seems that there is no xorg.conf anymore so I don't know what to do.
How can I force Ubuntu 11.04 to start with a screen resololution of 1600 x 1280.
View 2 Replies
View Related
Jan 16, 2010
I wonder if anyone can help, I've got an annoying problem with an Acer Revo running Ubuntu 9.10 with the latest NVidia drivers. The Revo is connected to my TV via an amp by HDMI. The Revo didn't seem to like this, I'm assuming due to some handshaking issue with the HDMI which meant that no signal was being passed. Therefore, in Xorg.conf I have used
Code:
Option"UseEDID" "False" This makes the a picture appear but the highest resolution available is 640x480 (if I connect directly to my TV and comment out the "UseEDID" line the resolution is the proper 1920x1080).I have tried editing xorg.conf (the file is posted at the bottom) to force 1920x1080 resolution but nothing seems to work.
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
Section "ServerLayout"
[Code]...
View 1 Replies
View Related
Jun 2, 2010
I have CeontOS machines connected to LCD via KVM which causes failure to properly detect screen resolution and I'm stuck with 800x600 until I reset X server with the LCD connected directly to the PC. How can I enforce higher screen resolutions?
EDIT: I followed the advise and left only one resolution in my xorg.conf but it didn't help.
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 16
[Code]....
View 2 Replies
View Related
Dec 26, 2010
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies
View Related
Apr 5, 2011
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies
View Related
Dec 7, 2009
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies
View Related
Sep 24, 2010
So I have force quit and the little window is stuck. reads "click on a window to force the application to quit. To cancel press <ESC>" How the heck do I get rid of it? I tried xkill, it does not work.
View 3 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
Nov 20, 2010
I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies
View Related
Apr 2, 2010
I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
View 2 Replies
View Related
Dec 5, 2009
I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
View 9 Replies
View Related
Sep 8, 2010
I can do it in Win, just can't get my head around it here.
I need to be able to see *all* of the program running lol, the bottom portion (around 25px i think) is missing.
Programs only options are, 1024x600 (netbooks native WSVGA res), and 800x600.
I need something like 1024x750...
View 8 Replies
View Related
May 11, 2010
I want to know how to know wich mode my wireless device uses and how to force specific one.
View 2 Replies
View Related
May 12, 2010
I'm looking for a simply way to Force log off other users who may be logged into the OS. Windows has a simple way to go into users and force log off other users. All I have found in Ubuntu is terminal methods. Are their no GUI tools to accomplish this?
View 7 Replies
View Related
Aug 1, 2011
I have a Dell Inspiron 9200 with the Intel Pent M 1.8ghz processor that has speed stepping. For some reason the speed stepping doesn't seem to be working...is there a way for me to force the CPU to run at a higher speed then the current 600mhz...I installed cpufreq but the commands i give it from the cpufreq wiki don't seem to be doing much.
View 9 Replies
View Related
Jan 5, 2010
Ok i'm runnign ubuntu using the live CD i already have ubuntu installed on my computer but it wont boot. I'm trying to delete the file causing the problem. SO is there a way to delete a file that is in the ubuntu installed on my computer from the ubuntu on the livecd?if that doesnt make sense how can i delete a file in my ubuntu w/o actually being in ubuntu?
View 7 Replies
View Related
Jan 11, 2010
I have a package on my system that has a missing dependency and I would like to install another piece of software via apt-get with out having to remove my software that is missing a dependency... Can I force it install the other package with out first running apt-get -f install?
View 6 Replies
View Related
May 2, 2010
Have just moved into my gf's place from a shared accomodation and have taken my mythbuntu (8.04) box with me. Have plugged it into her Sony tv and initially it looks promising, bios screen shows and so does the mythbuntu splash. But after that the tv just sits there with a message saying "out of range". Anyone got any ideas how I can force it into a low graphics mode or similar so at the very least I can access the desktop.
Oh and to make things worse my gf has no Internet access (writing this on my phone) and I don't have a livecd to hand
View 7 Replies
View Related
Oct 26, 2010
I have installed the newest version of Peppermint Ice (Ubuntu derivative) on my Eee PC 701's internal HD and would like to get some more space on the drive (2GB total) by removeing packages like hunspell-en-ca, but synaptic warns me that language-support-writing-en will be removed. How can I force removal of this and similar packages like myspell-en-au, without uninstalling English language support?
View 2 Replies
View Related
Nov 28, 2010
I know I can force a fsck run at next reboot using
Code:
shutdown -rF now
or
Code:
touch /forcefsck
can I force the fsck to more indepth checks such as doing directory optimisations, bad blocks checks, etc. maybe by passing parameters to the fsck call during startup?
View 7 Replies
View Related
Jan 2, 2011
I've hired a dedicated Ubuntu10.10 Server on a remote colocation. I needed a GUI to be able to hook into my KVM guests, so I installed xubuntu-desktop.
My dedicated server provider provides me very useful free service. I can request a CTRL+ALT+DEL to my server through their web based server control panel, and I can boot into a live image from their network. This is vital for me to be able fix back configuration problems.
However after I have installed xubuntu-desktop (XFCE I believe), the CTRL+ALT+DEL no longer reboots the machine.
I've been struggling with this simple issue for quite a few days, I simply can't get it to work.
I've tried setting it through XCFE 4 Settings Manager. It does not work. From my understanding any keyboard shortcuts defined here are specific to user, so I think they'll not work when the server is in login screen (no user logged in).
I've tried to put control-alt-delete.conf files in /etc/init and /etc/init/d , neither seems to trigger reboot.
View 3 Replies
View Related
Jan 16, 2011
I use Ubuntu 10.10 on a Medion PC (E6220), and everything is fine and dandy ... except, the webcam does not work. Well actually I think it does work, and I also think, that Ubuntu would recognize it, if it was turned on. The problem however is, that in order to turn it on, I need to press fn+F9, and that key combo simply does not work ... neither does the fn+F7 combo, which toggles the wifi - but that is less important, since wifi is on and works. Logging into i.e. win7, toggling the webcam there, and then back into Ubuntu is not really an option at the moment. So right now I seem to be stuck in a situation, where a non-defined keyboard shortcut equals no webcam at all. The obvious question of course is: Is there a way to force the webcam on without the key-combo?
View 7 Replies
View Related
Feb 24, 2011
Is there a way to fix a partition that wont mount?
When I boot into Ubunutu I am told that the shared partition (which I called Storage on my shared NTFS D Drive) wont mount.
View 6 Replies
View Related
Jul 23, 2011
I create liveusb using Ubuntu. The problem is Ubuntu always use my swap partition, but i want to make it use my swapfile which is located on the flashdisk. I know that after login, i can add swap. But that's not the point, i want Ubuntu use swap file in flashdisk since booting.
View 3 Replies
View Related
