I have installed the newest version of Peppermint Ice (Ubuntu derivative) on my Eee PC 701's internal HD and would like to get some more space on the drive (2GB total) by removeing packages like hunspell-en-ca, but synaptic warns me that language-support-writing-en will be removed. How can I force removal of this and similar packages like myspell-en-au, without uninstalling English language support?
View 2 RepliesI was working on my flash drive install of Ubuntu, when I squashfsed my /usr. Long story short, I some how ended up with a working /usr, but with a few packages marked as installed, but not having its components installed (emacs). When I try to remove emacs (emacs23-nox), it gives me numerous errors about files (all relating to emacs) not existing (all in /usr). Thus my questions are as follows:
1) Is there a way to force the removal without it caring about missing packages?
-OR-
2) Is there a way to reload which packages are installed by checking which files exist, etc?
-OR-
3) Should I just nuke and re-install?
I am using Ubuntu 10.04 LTS. I have manually removed Canonicals version of coreutils (7.4-2ubuntu2) and installed the latest official version of coreutils (8.9). Synaptic is still registering Canonicals version as being installed. how I can force remove the entry so it shows it as not being installed? I'm guessing there will be a file some where..
View 5 Replies View RelatedI just installed VLC player 1.1.2, but during installation it says it requires a whole bunch of other packages to be installed as well (dependencies is the word for it I think). So I installed them. So if I want to remove VLC player 1 day, and I mark it for complete removal, will the dependencies be uninstalled as well?
View 9 Replies View RelatedI have noticed that after I uninstall a package from my system the hidden files in my home directory are still there. For example I used to have an application called proxychains installed. But then after I uninstalled it with the Ubuntu Software Center there was still a .proxychains folder in my home folder. Is there a way to remove all these files? Also are they stored anywhere else except home? I ask because I would like to clean up my system and I am O.K. with reconfiguring my applications if I do decide to install them at a later date.
View 9 Replies View RelatedI am new to Ubuntu. I am using Ubuntu 10.10 I tried to install software (Gmail Notifier) through 'Ubuntu Software Center' I don't know why I am getting following error message :
(Reading database. 95%dpkg: unrecoverable fatal error, aborting: failed to read on buffer copy for files list for package `libtaglib2.0-cil': Input/output error Even if I tried to remove any software I am getting this error. Also when I want to change 'Visual Effects' to 'Normal' or 'Extra' through 'Appearance Preferences'.first it shows 'searching for available drivers' and then the message :
When I try to upgrade from 9.10 to 10.4 the upgrade fails. I am not sure whats going on. I looked at the logs /var/log/dist-upgrade and grepped for hostname and found this:
apt.log:Investigating hostname apt.logackage hostname has broken PreDepends on upstart-job apt.log: Considering upstart 12956 as a solution to hostname 5103 apt.log: Removing hostname rather than change upstart-job main.log:2010-07-18 22:49:07,574 DEBUG The package 'hostname' is marked for removal but it's a ESSENTIAL package main.log:2010-07-18 22:53:01,415 ERROR Dist-upgrade failed: 'The essential package 'hostname' is marked for removal.'
Why is hostname being marked for removal?
I started an upgrade from Ubuntu 8.04 to 10.04 and it stopped with the message: Ubuntu desktop is listed to be removed but is on the removal blacklist. Then it restored back to 8.04. I don't know how to resolve this - it would be alright to remove the old Ubuntu desktop.
View 1 Replies View RelatedI'm trying to re-install tomcat6 after removing it and all it's dependencies, but it got corrupt when trying to re-install. I'm on Ubuntu Sever Lucid 10.04 LTS with command line only.
I started with:
Code:
sudo apt-get auto-remove tomcat6
Then I deleted the /etc/tomcat6 directory manually since it contained file settings I didn't want. I assumed it would automatically install the missing files.
Then I tried re-installing tomcat6 as follows:
Code:
sudo apt-get install tomcat6
This yielded an error:
Code:
Setting up tomcat6 (6.0.24-2ubuntu1) ...
chmod: cannot access `/etc/tomcat6/tomcat-users.xml': No such file or directory
dpkg: error processing tomcat6 (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up authbind (1.2.0build3) ...
Errors were encountered while processing:
tomcat6
E: Sub-process /usr/bin/dpkg returned an error code (1)
How are you supposed to completely remove a package and re-install it normally?
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
how to remove a dbvis package as it causing yum to break. I have googled and searched the forums. I found this [URL]. I modified the python script that yum uses to find the offending package. This is the symptoms when i run yum...
Code:
[root@localhost ~]# yum -d 10 list
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in <module>
[code].....
i get this error whenever i update or install/uninstall a package Package operation failed
The installation or removal of a software package failed.
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
[Code]...
I have the suspicion that the latest gdm update (2.28.1-0ubuntu2.2) broke something because the login screen isn't displayed anymore on my desktop. My question is the following:How can I revert an update or force a package version via command line? It's pretty straight forward via Synaptic but I only have access to the recovery command line so that is not really an option.
View 1 Replies View RelatedAs a follow-on to something Telemachos said in another post:
Quote:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
Code:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
Code:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Code:
Also, the linux-headers packages I have installed are:
Code:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
Code:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?
I want to remove a keyring package I installed from a repository that I no longer want to use. However, I cannot remove it:
# apt-get remove -y --force-yes debian-xray-keyring
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be removed:
debian-xray-keyring
0 upgraded, 0 newly installed, 1 to remove and 130 not upgraded.
After this operation, 49.2 kB disk space will be freed.
(Reading database ... 181076 files and directories currently installed.)
Removing debian-xray-keyring ...
gpg: key "AB8F901D" not found: eof
gpg: AB8F901D: delete key failed: eof
dpkg: error processing debian-xray-keyring (--remove):
subprocess installed pre-removal script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing:
debian-xray-keyring
E: Sub-process /usr/bin/dpkg returned an error code (1)
I forced the install of graph-tool package [URL]. Now it is of course tagged as broken, so update manager wont do anything. But I want to accept it, I know it is not really broken. (In fact, graph-tool_xxx.deb asks for libcgal4. squeeze only has libcgal5, so I am betting this is not an issue, as far as graph-tool is concerned.)
View 2 Replies View RelatedI have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** **************************************************
sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb
[sudo] password for aUser:
dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
I installed F13 on a system by doing and install from an F12 Live USB key and then doing an update do F13. Unfortunately the upgrade failed to update a package because it thought the F12 package was more recent. I can't just do a clean install of F13 because I'm in Massachusetts and the system is in Chicago so I need to be able to fix this remotely.
I tried to install Google Chrome. I'm getting the following error, package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed As you can see the F12 package is -19 and the F13 package is -17 which is confusing yum. Is there a way to force yum to install the F13 package?
With Synaptic I can not "Mark for Removal". In terminal I tried "sudo synaptic", "gksudo synaptic", it doesn't work. What is wrong?
View 1 Replies View RelatedI just installed ubuntu 10.04 on my spare computer.Everytime I try to install or remove something (through the ubuntu software center) I get to 90% and I get an errormessage. The software seems to be installed, so I'm not sure what the deal is.The programs I tried to install:- chromium- skype- thunderbird- ubuntu restricted extrasThe programs I tried to uninstall:- evolution
View 8 Replies View RelatedI've been having problems with AWN's shiny switcher (the desktop switcher app for AWN). On startup it often, but not always, appears as two identical switchers side by side. After changing any of the preferences of the switcher it returns to normal. After restarting the problem continues. I have tried complete removal of the program, deleting any files or folders that look like they have anything to do with AWN settings, and restarting. But after reinstalling it seems that all the settings stay the same. Where exactly are AWN settings saved, specifically the settings for applets? I will try to post a screen-shot of how the applet appears when I restart later.
View 6 Replies View RelatedI have recently installed what I thought was going to be Ubuntu client on to my laptop but it turned out to be server 10.04. I kept meaning to uninstall it and install the client version but have left it so long that I have forgotten the username and password. Is there any way around this and how do I go about uninstalling the server edition to install the client?
View 9 Replies View RelatedI have a Toshiba Satellite L300 with 160GB HD dual booting 11.04 and Vista. I have now got VB working to run the two programmes I only need windows for. So my HD has 90GB for Vista and the rest is for 11.04, what is the best way to remove Vista and leave the HD free for Ubuntu only? Do I just back everything up to an external HD and reinstall?? (But I have a few problems get some things to work) So not sure if this is the right option for me or is there another way?
View 4 Replies View RelatedI now run 9.10 but I used to run 9.04. Accidentally made my 9.10 pretty small, and I was basically being lazy and leaving it, but I now want to free up the 80 GB I left on 9.04. Is there any way to just delete the partition, I have all I need from it.
The path from what I can tell for it is /dev/sda1
i removed WINE from my system as i dont use it often, but its still showing when i click on 'applications'
View 3 Replies View RelatedI was in Startup Application Preferences and I was managing the list of startup programs when I accidentally clicked Remove. Now it's gone and I don't know what it was. The very top one, above Certificate and Key Storage.
View 7 Replies View Relatedi was using windows 7 and started to get sick of windows completely, so i installed ubuntu and was dual booting between the two.. somewhere down the line i had made a mistake (can't remember exactly what) and instead of properly fixing the issue i decided to re-install ubuntu, but in doing so i now have created another partition and another install of ubuntu, so i have 2 ubuntu's an a windows 7. i would like to remove the 2 ubuntus and remove the partitioning to return to just having windows 7 installed and then i intend to install ubuntu studio. i have done some searching on this issue and i am still not entirely sure what needs done and how to do it without messing anything up.
i have read that i need to run fdisk /mbr from a windows command prompt and that this will fix the master boot record and return it to only having the option to boot into windows, but i also read that this can cause problems if the disk has more than 4 partitions (which it does, courtesy of 3 OS's and a couple of storage partitions).
so in summary: remove both ubuntu installations and return the disk to the partitions that were there before i installed ubuntu the first time.
would like to get this sorted out and eventually just get rid of windows altogether. there are a few windows programs that i will miss, but ubuntu studio seems to have most of them covered so after a bit of learning and adapting there will hopefully be no need for the unstable, expensive, non-secure heap of crap that is microsoft windows.
In my previous thread I found out that liquorix kernel wasn't booting properly, so I decided to uninstall it. But then my pc froze and when I restarted it, I had the grub prompt again, only this time the kernel set to boot is 2.6.35-25-generic.
Output of bootscript:
Code:
Boot Info Summary:
I was using a line device to record compact cassettes to digital (Linear PCM) then I transferred these files to the computer.Due to cassette print-through, there is audible, albeit weak, pre-echo. This is not caused by the recorder since I can hear them playing the cassettes on a deck.So. Does Audacity have a pre-echo removal function, or can a similar result be obtained by applying different effects? Or any 3rd-party plug-ins?
View 1 Replies View RelatedCan I remove the workspaces button from unity-2d? The workspace switcher is super slow in unity-2d, and I don't want to use it (instead, using the ALT+CTRL+Arrows) but I don't want to accidentally click it.
View 2 Replies View Related