Ubuntu :: After Grub Update 'loadfront' Not Found
Nov 28, 2010
I foolishly let Ubuntu update grub yesterday on my Wubi installation and now cannot boot:First I get the error:Error: unknown command - loadfront.Error: File not found then the system reboots almost immediately so there is no chance to get to the grub prompt.I assume my choices are 1) restore from backup (I have one) or 2) boot from a LiveCD and edit grub (I don't know what changes to make).
But I would rather be able to update grub in the future along with other Ubuntu updates, so I'm really hoping someone knows what the error is in this last update and whether it will be fixed.
View 3 Replies
ADVERTISEMENT
Nov 12, 2010
I've been trying change the default OS in GRUB. I changed the value for GRUB_DEFAULT in etc/default/grub. However, when I run update-grub, I get the following error:
/etc/default/grub: 19: e: not found
View 7 Replies
View Related
Jul 26, 2010
This is what I get when I'm updating grub xxx@xxx-desktop:~$ sudo update-grub /etc/default/grub: 9: splash: not found
View 1 Replies
View Related
Jun 16, 2011
I have done the kernel compilation for linux-2.6.38.5 I have perform all the steps well ,once i am updating in /boot/ grub/menu.lst & giving command update-grub it showing this error
Code:
[root@localhost grub]# update-grub
bash: update-grub: command not found
I have install it also through
Code:
yum install grub
I gave this command
Code:
grub-setup --version
still same error ]grub-setup not found
View 2 Replies
View Related
Apr 7, 2010
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
View 2 Replies
View Related
Aug 15, 2010
I gave sda1-2 for windows and sda 3-4-5 on an extended partition for my linux OS. I installed ubuntu on sda 7 (when I go into disk utilities it shows up as sda 7 idk why) alongside another ubuntu on sda 5 ( EXTENDEDPARTITION : sda 5-6-7 ) so I could remove mandriva bootloader.Since I did, I removed ubuntu (sda 7) since it wasn't necessary but after it gave me the grub file not found.Obviously yes, since GRUB was installed from sda 7 but i have another grub.conf on sda 5 and I would like to know how to change the path of the grub reader to sda 5? or must I install all over again de grub loader?
View 1 Replies
View Related
Aug 24, 2010
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
View 4 Replies
View Related
Feb 28, 2010
Just copied / to a new HDD. On reboot I am getting the error message "the symbol @grub_getcharwidth@ not found. PC then defaults to grub rescue.
I have d/led Meierfras grub script. result is as follows
Code:
Boot Info Summary:
View 5 Replies
View Related
Mar 5, 2011
I was unaware of the difficulties of installing and booting Ubuntu from the "onboard raid" that the NVIDIA nForce chipsets provide. However, I've managed to get it working reliably with one single caveat:
When update-grub builds the grub.cfg, it refers to all of my partitions as follows:
Code:
menuentry 'Ubuntu, with Linux 2.6.35-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(/dev/mapper/nvidia_caifaefg,msdos5)'
[Code]...
So I'm guessing that the whole nvidia_blah,msdos5 is because of that. However, it doesn't seem to explain why Grub would THINK that would work and it in fact does not work. That's the biggest source of confusion on my part.
My questions are as follows: First off, because as an IT person I want to know: Why does this sort of change work? What does changing that device name change in GRUB's behavior? Is there a setting in /etc/default/grub that would change the way it's naming these RAID devices? Is there a value for this setting that would give me the device names that work, as explained above?
If there is no setting change I can make in /etc/default/grub, could I add a sed command on to the end of update-grub or can I make a modification to one of the scripts in /etc/grub.d? What sort of change would be recommended? How would I preserve this change through later package upgrades that would possibly rewrite these files?
View 1 Replies
View Related
Feb 28, 2011
I have an old BIOS (only 149 GB detected in 160 GB drive). I have installed very few OS as a result - Windows in first 80 GB , 2 distros (20 GB each) in next 40 MB which is within the 149 GB. On issue of "update-grub" grub seems to detect all OS and generates grub.cfg. But on boot , one distro does not appear in the menu.
View 3 Replies
View Related
Mar 4, 2011
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
View 9 Replies
View Related
Dec 1, 2010
Ran the updater, went to boot to Win7 to use Photoshop and realized that the grub menu was gone. Ubuntu boots by default now. I tried running "sudo update-grub" at a virtual terminal and while it listed the various linux kernels ok, it then got caught in a loop spitting out some crazy looking errors. I rebooted and Ubuntu came up fine. I tried running "sudo update-grub" again from the gnome terminal and it hangs the whole computer for a few minutes and finally gives me this:
[Code]...
View 1 Replies
View Related
Apr 19, 2011
I updated my grub yesterday using the command:
Quote:
sudo grub-update
and I rebooted and grub menu not coming now. I have a dual boot with Win7. Ubuntu 10.04 is installed with WUBI. I can run WIN7 but can't run Ubuntu now.
View 7 Replies
View Related
May 6, 2011
After certain system-wide changes, like kernels updates, I obtain grub prompt on restart. However, if I put the hard drive into another computer (b), it boots up fine. Since, however, I use the present computer (a) regularly, I only use b to purge and reinstall grub using the chroot method. However, doing so every time is time consuming; and I cannot change anything in the defaults and run update-grub without obtaining a grub prompt on restart. How do I fix this?
View 9 Replies
View Related
Jan 16, 2010
I'm trying to edit my Grub menu by removing the older kernel after I ran updates as well as make my Windows 7 install first on the list.
I ran...
Code:
sudo gedit /boot/grub/menu.lst
and edited it accordingly.
After that I ran...
Code:
sudo update-grub
I restarted and see no changes on my grub menu. Running 1.97 beta4 if it makes a difference.
Oh and btw I am a complete n00b with linux.
View 1 Replies
View Related
Jan 22, 2010
So I got my DOS 6.0 entry in... but Grub reports file not found. I assume grub is fine, and DOS6 was working and I haven't done anything to it. Needless to say, I'm guessing that I'm telling grub to look in the wrong place for the dos bootloader. Here's what I have in my 40_Custom file:
#!/bin/sh
exec tail -n +3 $0
menuentry "MS-DOS 6.0" {
insmod chain
insmod vfat
search --fs-uuid --set 3c34-9666
chainloader +1
}
The "vfat" and uuid of "3c34-9666" were reported by using sudo blkid Do I need to set the root? I thought the uuid took care of that?
View 4 Replies
View Related
Feb 27, 2010
I have UBUNTU 9.10 and WIN 7 installed on my computer. I turn computer on, choose UBUNTU, do what I need and shut down computer (or reset - doesn't matter). Turn on computer again and get message:
GRUB loading.
no module name found
Aborted. Press any key to exit.
Operating System Not Found.
So I turn comp from Live CD, install GRUB and after resetting computer everything seems fine - but unfortunately not for long. Next reset and the problem is back again. The problem only occurs when I choose UBUNTU. There is no problem with WIN 7...
View 4 Replies
View Related
Mar 12, 2010
After trying to boot into ubuntu grub gave me an error 15 saying the the file could not be found.
View 3 Replies
View Related
Sep 5, 2010
what I think will be a long post, but I want to include as much information as possible to get some help. I post my question here because it is mostly a boot issue and not strictly a server issue, although that is what I am trying to install. I bought a used server, motherboard has all IDE connectors for HD and cd/dvd. The board is am Asus cuv4x-d. It is a rather old board, introduced to market around Sept. 2000. The two IDE hard drives that came with the mobo have presented the problem as what I will describe for the SATA problem. I wanted to use my SATA-Hard Drive as my storage. I bought an SATA-to-IDE adapter. I installed the hardware and booted from the Ubuntu Server cd. Everything went fine and the installation smooth. When the initial reboot started, this is where the error comes. I get an error that says, Error: out of disk. The next line shows a grub rescue prompt. It appears that Grub can't be found. The motherboard has a Primary and Secondary IDE connection. I have tried connecting the adapter to both.
View 6 Replies
View Related
Sep 13, 2010
I installed Ubuntu 9.10 a few days ago, did the updates, surfed on the net, mounted a slave drive and read everything on it, shut down, pulled the slave out and now I can't boot.
After the post screens I get: Verifying DMI pool data
Grub loading
error: the symbol 'grub-device-open' not found
grub rescue>
I think way back I had to reinstall grub or something on another machine I had but I don't remember anything about it. Is that what I have to do and how? Is it because I pulled that slave drive out that this happened? I want to get some more files off the slave as I wasn't finished.
View 9 Replies
View Related
Nov 6, 2010
On a particular logical partition
/sdaNN does not have grub-install no where on find file
/sdaNN+1 does have grub-install -->usr/sbin
Why would this be so?
View 5 Replies
View Related
Dec 3, 2010
I uninstalled ubuntu from my main HDD, and its now on a different HDD. when I turn on my computer I get:
Partition not found
Grub Rescue
I've used my windows disk and repaired my mbr and boot (bootrec /fixmbr bootrec /fix mbr) multiple times, yet I always get this problem.
Only way I can boot windows is if I leave my install disk in my drive. It will say press any key to boot from cd / dvd I just wait a couple seconds, and it boots into windows. Without the disk, I get the grub problem. I have only 1 partition on my HDD, and that is my windows 7 partition, nothing else.
View 9 Replies
View Related
Jun 25, 2011
Just tried installing ubuntu after a clean win7 install. Now windows is only recognized as 'unknown' and update-grub cant finsd the boot loader or bootmgr for windows. heres my boot script
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
[code]....
View 4 Replies
View Related
Aug 10, 2011
'' Ubuntu 11.04'' I have used G-parted to make some free space for my windows partition '' 100 GB. But before windows is installed the Grub loader is already broken . So i decided to restore the GRUB in the live CD en start with sudo grub and i get this:
sudo grub
sudo: grub: command not found
sudo /sbin/grub
sudo: /sbin/grub: command not found
View 4 Replies
View Related
Aug 11, 2011
A friend gave me Ubuntu 9-10 and I have been using it in my netbook for some time. Bthe other day we did an update and now a black screen is up and states: Error: no such partition Grub rescue>_ I am operating dual O'S with Windows XP and Ubuntu The only thing I have been able to do after searching hours on the Internet is the following: When I type set it gives me the following information:
Prefix=(hd0,5)/boot/grub
Root=hd0,5
Grub rescue>_
I understand that the hard drive is 0 meaning the only one I have and 5 means the location of the grub in the partition. Other than that I can get no further!
View 7 Replies
View Related
Apr 20, 2010
I get this message when Ubuntu 9.10 tries to update:
W: Failed to fetch [URL]
404 Not Found [IP: 91.189.88.30 80]
W: Failed to fetch [URL]
404 Not Found [IP: 91.189.88.30 80]
What could be the problem and how might I correct it?
View 2 Replies
View Related
Apr 30, 2010
Just before the computer boots into the grub menu, I noticed a message on the prompt saying that a file was not found. I had reinstalled Ubuntu 10.04 prior to this. Maybe the grub was not configured properly but I don't know how to fix or find the missing file. I also noticed that I don't have /boot/grub/grub.cfg.
View 3 Replies
View Related
May 21, 2010
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies
View Related
Jul 20, 2010
Whenever I try to boot my computer, GRUB (Version 2) says "File Not Found". It does this for all entries except the Memtest86+ entries, which work fine. I have tried reinstalling GRUB, but it still does the same thing.
View 6 Replies
View Related
Nov 2, 2010
Have a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
View 9 Replies
View Related
