I have a .po and .mo file. I need to add several lines . I would like to edit the .po file. With Poedit I do not seem to be able to add lines to the .po file. I believe I need the .pot file for this. How can I create a .pot file from a .po file so I can adjust details and create the .po and .mo anew?
View 3 RepliesI'm trying to learn about internationalization for software I hope to develop.
Thus I follow tutorial [url] about using GNU gettext.
I make the traditional "hello world" program as per instructions, but when I get to the bit where it says " ./hello should now give you output in Oriya"... well mine still just says "Hello, world!" instead of "ନମସ୍କାର"
I do have a log file where each line start with a timestamp:
"2011-04-30 23:58",....
"2011-04-30 23:59",....
My question is how I can alter this timestamp to e.g subtract 6 hours by using a bash script.
I need to install gettext on my machine, so I use synaptic to install but it give the following error
gettext:
Depends: libc6 but it is not going to be installed
Depends: libgomp1 but it is not going to be installed
Depends: gettext-base but it is not going to be installed
Recommends: curl but it is not going to be installed or
wget but it is not going to be installed or
lynx but it is not installable
So I check libc6 which is install as libc6-dev other libc6 files such as xen, are high highlighted in red.
libgomp1 is installed.
gettext-base is installed.
curl will not allow itself to install as it says it needs libc6 (which is installed see above) lots of other curl files are highlighted red, with x's next to them, to remove. However the apply button is not highlighted?
Let me sketch the problem here, I'm using the CentOS 5.5 distribution to setup ah linux media server with XMBC. To do this I followed the steps on this blog
when I want to execute the bootstrap script i receive following error:
[root@SRV XBMC]# ./bootstrap
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.in: tracing
[Code].....
If you look closely, you'll see that the third sentence say's that autoreconf is not using gettext. After a long search, I suspect it throws the error because of the fact that my system doesn't contain the gettext-lib package. The problem is I can't find the package anywere... I can't yum it and on the internet I only find the gettext and gettext-devel packages...
When I run frozen-bubble, I get this error:
Code:
lysender@darkstar:~$ frozen-bubble
Can't locate Locale/gettext.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.2/i486-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5/vendor_perl/5.12.2/i486-linux-thread-multi
I have updated to current as of Jan 2 but I'm not really sure when the problem started since I only play with frozen-bubble sometimes.
Will rebuilding fronzen-bubble solve it? Haven't tried it yet as of now.
I'm trying to compile gettext 0.17 but it is dependent on glib2. the problem is that when i try to compile glib2 i get the error that says i must have gettext support in my c library or use the GNU gettext library. what should i do?
View 2 Replies View RelatedI have just did a fresh install of Ubuntu 10.04 to a computer with a generic, low end, on board graphics card. It will not allow me to change the resolution to something other than 800x600 or lower. 8.04 allowed me to set the resolution to as high as 1600x1200 using the same monitor/graphics card.
View 4 Replies View RelatedI just recently installed Xubuntu 11.04 and I want to adjust the brightness levels. I tried using the corresponding buttons on my laptop, but they aren't working. Where can I find the brightness settings on the OS?
I tried this thread: [URL] , but "Power Manager" didn't have that setting.
I cannot adjust the screen brightness in the power management menu. I can access the window and move the scroll bar, but there is no change.
I am on v 10.04 32bit , a Benq joybook s35.
It was working just fine on the previous version of ubuntu.
I know many apps have their own independent volume controls, but not all do. Is there any way to control this in a similar manner as Windows 7?
View 4 Replies View RelatedOn last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies View RelatedIf one right-clicks on the date and time tab in Ubuntu 10.10 desktop, then there is no obvious way to change the time. If one right-clicks and goes to help, then the explanation for changing time is as follows under the category 'usage':
2.3. To Adjust the System Date or Time.
To adjust the system date or time that the Clock applet displays, perform the following steps:
1. Right-click on the applet, then choose Adjust Date & Time.
2. Type the root password, then click OK.
3. The Clock applet starts the system tool that sets the system date and time. Use the tool to adjust the date and time.
The actual way to do this is as follows:
Right-click on the date and time applet. select preferences, and down at the bottom of the window that opens push the 'time settings' button.
Then you will be able to adjust that date and time.
I'm having trouble with my mouse wheel. On one click, it pulls down to the halfway point. This leaves me with either dragging the bar around on the right hand side, or using the touch pad. this is a new (to me) notebook, which I haven't had for long. I just can't find where to adjust the sensitivity.
View 1 Replies View RelatedDoes anyone know of a way I can adjust the size of a partition in KDE down to the exact size of the files on it so there is no blank space?
View 4 Replies View RelatedMy computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
View 3 Replies View RelatedUbuntu 10.04 lucid with gnome-power-manager installed on a HP elitebook 8530p. FN keys and desktop display applet will not adjust the display. when I first boot my display is pretty bright with either it plugged into ac or not until i either plug or unplug for the first time then the display dims some, but will not get bright again plugged or unplugged, also /proc/acpi/video/DGFX/LCD/brightness shows it set to 100% at all times it never changes. I'm using the ati driver tried running aticonfig --acpi-services off, but it made no difference. It worked fine in karmic and ibex. I'm out of ideas on how to fix this one. Can anyone point me in the right direction on what to try next?
View 5 Replies View RelatedI want to adjust clock in ubuntu. When I installed it it asked about location and setting if for asia it automatically take the clock, but that timing is not correct. It showed 10 pm when actually it was 5pm. After installation I tried it to adjust but it could not be managed..it automatically took that previous timing.
View 4 Replies View Relatedwhy both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies View Relatedanyone know how to turn off or adjust the lockout feature in ubuntu.I am running the new 10.04. With this feature after I am idle for time til I am brought back to the login screen, this is very annoying for me and I have to keep unlocking multiple times a day.Hopefully there is a way to configure this behavior.I am note sure if this is something specirfic to 10.04.
View 1 Replies View Relatedthe application that is giving me the most grief, as far as the dialog box being over-sized for the screen is KDE BasKet - how do I adjust it?
I have looked at the configuring file in the kde home file, but I am not seeing anything that looks like it controls the properties dialog box.code...
Since I installed Lucid, anytime I watch a video in Firefox I can't adjust the volume. I click on the little volume icon, and the volume meter pops up, but it won't let me change it.Also, I can't change to a different point in the video.And finally, it won't go full screen when I click on the fullscreen button.
View 1 Replies View RelatedI'm trying to play Regnum Online on a netbook and windows is way too big for the screen, and it wont let me resize it
View 5 Replies View RelatedI just want to know how to adjust the screen resolution of my boot up screen. My PCs maximum resolution is 1366x768 but I think my boot up screen only uses 600x400. I doesn't look nice for me. The logo of Kubuntu is too big and the colors are not the true colors of the Kubuntu Boot up screen.
View 2 Replies View Relatedis there a tool for this? (preferably similar to xfce display settings with sliders)
View 1 Replies View RelatedI have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G
Chipset: FRU PN 49P1599 (Intel 845G)
I am using 10.10 and am searching for a program to adjust the settings on my webcam. I am using webcamd to upload pictures to a weathercam. I can use Cheese for viewing the output but the adjustments made there don't stick when I close Cheese.
It appears there used to be a package called gqcam which may have done the trick, but I can't find it in the repositories anymore. There is a current tar.gz package available but I'm hesitant to use it since I don't know why it was removed from the repositories. Does it conflict with the recent video changes in Ubuntu and what conflicts could it cause now or when I attempt to upgrade?
Heres my question: Is there a program available for Ubuntu which will allow me to adjust the settings of my webcam or is gqcam still compatible with Ubuntu? Bonus points for a .deb package.
I have a dell inspiron 600m with xubuntu 10.10 installed, I have it for a kids computer so I installed web content filtering (dansgaurdian) and I installed simple module for admin. dansgaurdian's control files (libdansgaurdian-perl) I instilled both from the USC. But I can't find where I can ajust the settings and on the web dansG is not filtering. how to find the gui part of it?
View 3 Replies View RelatedI'm a first time installer of Ubuntu. I've run it directly from CD a few times earlier, but I'm installing it from the CD for the first time. I've read some stuff about this from other sites, and have some doubts I hope you geniuses would be able to clarify. Situation : My 80GB Primary HDD is partitioned into what I think is 1 Primary partition [10GB] and 1 extended partition [70GB] which is further divided into three logical partitions.
I don't have to worry about other data, since I've got a 320GB External HDD for that. Now, Ubuntu says that it can squeeze the free space out of the Windows Partition. But my Windows partition is pretty full, and I don't want to re-install it on a larger partition. I've got one logical drive [20GB] free on my Primary HDD. Can it be converted into a primary partition without affecting anything else i.e. my Windows partition and the other two logical partitions remain intact ? Or do I have to format my extended partition and subdivide into a primary and extended partition ?
Q2 - How do I adjust swap space ? Does it have to be a primary partition ? Or can it be a logical partition ? To make a logical partition swap space, do I have to reformat my entire extended partition to squeeze out free space, or can it be kept intact? I'm using Ubuntu Hardy Heron. I know it's a lot to read, but I'm pretty confused right now.
I just upgraded from Ubuntu 8.1 to 9.1. Selecting (tapping) with the touchpad is a problem. I can not adjust it with the System > Preferences > Touchpad GUI. I have to tap and tap and tap, harder and harder. The sensitivity is way off. Can't adjust it with the GUI.
Anyone else have this issue. I'm using a Dell Inspiron.
More info: sometimes I tap and it works. Other times I have to tap tap tap tap, harder and harder. I believe it's a matter of adjusting the sensitivity of the touchpad, but do not know how to do this after upgrading to 9.1.
Can't do it with the GUI.