I'm trying to learn about internationalization for software I hope to develop.
Thus I follow tutorial [url] about using GNU gettext.
I make the traditional "hello world" program as per instructions, but when I get to the bit where it says " ./hello should now give you output in Oriya"... well mine still just says "Hello, world!" instead of "ନମସ୍କାର"
I have a .po and .mo file. I need to add several lines . I would like to edit the .po file. With Poedit I do not seem to be able to add lines to the .po file. I believe I need the .pot file for this. How can I create a .pot file from a .po file so I can adjust details and create the .po and .mo anew?
View 3 Replies View RelatedI need to install gettext on my machine, so I use synaptic to install but it give the following error
gettext:
Depends: libc6 but it is not going to be installed
Depends: libgomp1 but it is not going to be installed
Depends: gettext-base but it is not going to be installed
Recommends: curl but it is not going to be installed or
wget but it is not going to be installed or
lynx but it is not installable
So I check libc6 which is install as libc6-dev other libc6 files such as xen, are high highlighted in red.
libgomp1 is installed.
gettext-base is installed.
curl will not allow itself to install as it says it needs libc6 (which is installed see above) lots of other curl files are highlighted red, with x's next to them, to remove. However the apply button is not highlighted?
Let me sketch the problem here, I'm using the CentOS 5.5 distribution to setup ah linux media server with XMBC. To do this I followed the steps on this blog
when I want to execute the bootstrap script i receive following error:
[root@SRV XBMC]# ./bootstrap
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.in: tracing
[Code].....
If you look closely, you'll see that the third sentence say's that autoreconf is not using gettext. After a long search, I suspect it throws the error because of the fact that my system doesn't contain the gettext-lib package. The problem is I can't find the package anywere... I can't yum it and on the internet I only find the gettext and gettext-devel packages...
When I run frozen-bubble, I get this error:
Code:
lysender@darkstar:~$ frozen-bubble
Can't locate Locale/gettext.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.2/i486-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5/vendor_perl/5.12.2/i486-linux-thread-multi
I have updated to current as of Jan 2 but I'm not really sure when the problem started since I only play with frozen-bubble sometimes.
Will rebuilding fronzen-bubble solve it? Haven't tried it yet as of now.
I'm trying to compile gettext 0.17 but it is dependent on glib2. the problem is that when i try to compile glib2 i get the error that says i must have gettext support in my c library or use the GNU gettext library. what should i do?
View 2 Replies View RelatedWhen originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
I have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
I just installed the lamp stack and so far my default site is working. But a 2nd site I made is not working.I created the config file in /etc/apache2/sites-availableit reads:Quote:
<VirtualHost myip:80>
ServerAdmin webmaster@mydomain.com
ServerName mydomain.com
[code]....
I have very interesting problem after ~10 PHP Fatal error, php 5(latest one) in apache2(latest one) in Ubuntu Server 10.10(with latest updates) just do not work. So if try any php page it's not working(user see white page), but HTML still work fine.What that can be? So only restart apache is help to back php. (we are running Wordpress blog 3.1)
View 2 Replies View RelatedI had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
.m4a files not working in banshee but working in rhythmbox.
View 1 Replies View RelatedI can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
I upgraded Samba to 3.5.2 to enable Windows 7 to log in to the PDC. ACL was working with the Samba 3.0.28a that came with 8.04LTS. After upgrade I can now log in to the domain with Win 7 but ACL permissions are not working on Win7, XP or anything. They still show on the server but any attempt to change permissions on the workstation fails with "Access is Denied" and only user/group/other permissions are doing anything. Anyone know what changes for the ACL were made between the two versions? I know they're working on switching to VFS modules but setting "vfs objects = acl_xattr"
View 1 Replies View RelatedOK so I set up a server yesterday and got ndiswrapper loaded on it with the appropriate driver, I edited the /etc/network/interfaces file to contact my router with it's MAC address, WEP Key, etc... So the problem is I can ping addresses like Google and Ubuntu Forums but I can't use apt-get to install or update packages. When I try sudo apt-get update I get a whole bunch of Code: W: Failed to fetch <address>Temporary Failure resolving <address>My Wireless interface is wlan0 and also I can ping my server from my other computer running Linux and my server can ping that computer too.
View 1 Replies View RelatedI have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View RelatedI followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?
View 3 Replies View RelatedI have been a long time Windows user and just recently switched to Ubuntu. At first it looked like everything was going great ... now I just seem to have lots of problems with stuff not working right or not working at all, there are lots of issues but first tings first. I can't seem to get any program to copy or burn any dvds or cds. I understand that you need certain codecs and css stuff which are already installed.
View 5 Replies View RelatedI have an asus 1215b laptop. For some reason, when I plug my mouse into any of the USB 2.0 ports it doesnt work. However, these same ports work perfectly to coppy files onto pendrives or external hdd. However, the USB 3.0 works perfectly for everything. The last thing I expected was the newer 3.0 to work and not the older 2.0. btw, my mouse is a generic, brandless laser mouse (it is an inhouse brand of PC CITY stores: PC LINE). I have never had any problems with it before.
View 1 Replies View RelatedI recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies View RelatedI have Slackware 13.1 with kernel 2.6.37. Everything is working fine, except that I can't mount any CD/DVD and automount is not working either. If I connect any USb to my laptop it doesn't automount, I need to manually mount it. The same case happens with CD/DVD only that I can't mount any CD/DVD even manually. Here's the output:
Code:
bash-4.1# mount /dev/cdrom /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only
[code]...
I'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
I just upgrade my fedora 11 to fedora 12 using the dvd and upgrade setup. I know that there is Fedora 13 released however now I`m with fedora 12. My problem was with sound. Sometimes the sound is working, sometimes it is not working. Here is the information for my PC:
[code]...
however If i killall pulseaudio or kill -9 PID of pulseaudio, pulse audio starts again and sound is working. I do not know every time when my sound goes off to kill the pulseaudio.
i'm using ubuntu 8.04 on hp dv6600 laptop today i wanted to upgrade it to 8.10 downloaded alternate .iso and realised cdrom IS NOT working i have so many cd's but none works no errors no nothing like there is no cd in drive so hove can i upgrade? i seted up usb boot stick and what a surprise installer looks for cd (but hove can there be cd if it's USB) so what to do now ? btw. every time i ask i just get ignored if i woud wrote review on ubuntu today it woud sound WORSE than Windows VISTA what was a total fail
View 7 Replies View RelatedI have 2 machines, both running Ubuntu 10.4 and I have the same problem on both of them: since the upgrade to 10.4, DVDs will not play in either machine. When I try to open with Movie Player, it tells me that I may not have permission to use.I did reboot the one machine with the DVD still in the tray and it worked then.I tried the same thing with the other machine but it still gives the same error.
View 3 Replies View Relatedcomputer has 2 operating system: windows server 2003 standard r2 (computer is not connnected to a network & has only one hard disk) & ubuntu 9.10. microphone is working in windows server 2003 standard r2 (�cmi8738/c3dx pci audio device� & �legacy audio driver�) but not in ubuntu 9.10 (mic is already enabled). how can make the mic working in ubuntu 9.10 (if possible)?
View 4 Replies View Related