I have a laptop dual booted with windows vista and ubuntu.I downloaded certain movies and music files while using windows vista,which are there in my hard disk,My question is can i access these music and video files when i boot into ubuntu,and can i play them?
View 5 RepliesUbuntu and am dual booting it with Vista and I want to be able to access all my files from Vista whilst running Ubuntu. When I go on places, network, and click on windows network, I get a message saying 'Unable to mount location: failed to retrieve share list from server'.
View 3 Replies View RelatedI installed ubuntu 10.10 on a machine that had windows 7 x64. itts installed on a seperate HD, but now when I boot to the harddrive with windows 7 all i get is "verifying DMI pool data" how do I fix this so I can get back to windows 7 as well?
View 9 Replies View Relatedi want to know how i can use data which is situated in windows hard disks on linux red hat 5 operting system. i m using dual boot concept and i have installed both windows and linux properly. 3 partition of hard disks are used in windows and one in linux. my data like songs are situated in one of the windows partition. now i want to know how i can use that data when i m working on linux.
View 1 Replies View RelatedI have a dual boot ( Ubuntu 10.04 and Linux Mint), but I spend most of my time in the Ubuntu 10.04 partition. The point is that I have a huge files in the Mint compartment and I would like to gain access to those files from my Ubuntu 10.04 partition. I have tried samba and could not get the file sharing system to work. I had used samba when I was dual booting between Ubuntu and Windows and it worked but not in my present Linux dual boot.
View 4 Replies View RelatedPersonnally up until now I've been using either NTFS or a ext3 fs driver from Windows. I wonder if there's a better way. Probably NAS is the best, but not really practical with a laptop.
View 7 Replies View RelatedI downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
View 2 Replies View RelatedI have Windows 7 working on my laptop. I have 20GB space unpartitioned. I want to install a flavor of Linux like Fedora or Ubuntu in that space, but I have heard that keeping a dual OS configuration sometimes results in losing data stored on the hard disk. I've also heard that it may sometimes cause unrecoverable problem because when Linux is loaded on hard disk it will take over the boot loader from Windows.
Is this correct? Moreover, I have 6 partitions in Windows, but if I use a Live CD for Ubuntu or Fedora to boot, then it is not showing some partitions -- sometimes it shows only 4 or 5 partitions. What might be the problem, and how to resolve it without formatting the whole hard disk and repartitioning it?
I recently moved and didnt have internet. Out of a fit of boredom i decided to get me Ubuntu 10.10 disk and dual boot. My laptop has a SD slot in the front of it that has never been used so i decided that itd be cool to have ubuntu on an SD card that i could boot any time. I used the default installer to install it onto the SD card instead of using the Universal USB Installer (i imagine this is where i went wrong). It installed and everything works fine and when i boot up it lets me choose between Linux and Windows when the SD card is inserted. When it is not i get this screen http://imgur.com/gg63v. The only really problem is me worrying that the sd card will be lossed or get broke and i will no longer be able to access Windows. Is there anyway i can set the windows boot loader back t the default bootloader (i think this is what need to be done i may be completely wrong>
View 3 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I am installing a custom 8.04 live disk (basically, a mirror of my whole system with user data intact, sans all non-OS files) from a USB key with remastersys for the .iso creation, and UNetbootin for the bootable USB on a brand new 120GB PATA WD HDD. Both do nicely so far, so I have a working livedisk to use until I need to install Ubuntu to the drive.
I had a pure linux box, but I need to add XP with dual booting now- I have to use Autodesk Inventor 2010 software for my college class on my laptop, so I don't drive 30 miles to use the 1 computer lab equipped with that software. I'm not new to Linux, but I am new to more in-depth partitioning. I've taken the lead and looked into things- read this good guide, among others:
HTML Code:
http://www.psychocats.net/ubuntu/partitioning and noticed that there is a way to more deftly use partitions so that personal files can be shared access and write between Windows and Linux partitions- with this:
HTML Code:
http://www.fs-driver.org/ Ubuntu is still my main OS, but being able to access all my media/data files between the 2 systems would be nice. Problem is, until now, I've put everything on a single partition because I didn't know better. Now I do, but am a bit confused with all the guides as to what's most efficient, especially in my case where full RAM speed is crucial to running a single program.
Here's what I know I need to do: 1. The Windows XP install I know needs from 20-30GB for Inventor 2010 LT to work well. I don't need anything else in XP spacewise- it's just being added for Inventor. 2. I'd like to create a separate /home partition for Ubuntu this time to save my user data, making future upgrades much more painless (I will be getting Lucid soon). How that works when upgrading, though, I don't know yet..
3. I'd like both OSes to share all my personal files (docs, pics, music, Inventor design files) if it is an efficient choice that works without problems.
4. Finally, because 2GB is minimum for Inventor to run decently, I need to maximize the speed of my RAM for it- from my reading, these so-called "swap" partitions can somehow be added for buffering this- people seem to sugguest the swap be half the size of the RAM for fastest speed, and some say add separate /usr or other partitions. I'm not clear on what would be most efficient for me.
I have limited HDD space- because of my laptop's BIOS, this single 120GB drive is the biggest I can get on my laptop, so efficient partitioning would make a huge difference for me. Before this, a 60GB HDD was in this. I'd like to see some added space for my data storage, but still keep things as fast as possible for Inventor when I use it, and Ubuntu.
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
When i work in Ubuntu on a dual boot system with a shared NTFS data-partition where Windows is hibernated, and then reboot and continue working in Windows from the hibernated sesion, strange things happen. Files disappear, files that i worked on suddenly have the content of another file.
View 5 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View Relatedi am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I've got a win7/ubuntu 10.04 dual boot running on my system. I did the usual of installing 7 first, then ubuntu and using it as the default boot option. I now want to get rid of win 7 and expand the ubuntu installation into the free space. My current hdd structure is in the attachment. If I just boot a live cd and gparted to remove the win 7 partitions and expand the ubuntu installation into the free space, will that work or will it have a massive panic? how to I get grub to silently boot after without offering me any boot options?
View 7 Replies View RelatedI have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
View 4 Replies View RelatedIs it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedI found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies View Related