Ubuntu :: 10.10 Starts Loading Grub But Fails?
Jun 1, 2011
I'm running 10.10 on a Compaq Presario M2000 laptop and when I boot the laptop I have to choose which kernel I want to run.
Code:
GNU GRUB version 1.98+20100804-5ubuntu3
Ubuntu, with Linux 2.6.35-28-generic
Ubuntu, with Linux 2.6.35-28-generic (recovery mode)
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
[Code]...
(initramfs) I do have some command line functionality to where I was able to find out where the file system is located. My problem at this point is I want to try and recover some documents that were on one of the 2 user accounts and either fixing the installation so either user can normally log in or if I have to, reinstall 10.10 onto the HDD.
View 9 Replies
ADVERTISEMENT
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Oct 27, 2010
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
View 5 Replies
View Related
Dec 1, 2010
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
View 1 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Jan 31, 2010
Yesterday I partitioned my hard drive with kubuntu netbook remix and windows 7. after a few hours and reboots i turned on my computer and it said Grub loading. unknown filesystem rescue grub> It looks like allot of people have been having similar errors recently with windows 7.
View 3 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Jun 11, 2010
I just reinstalled kubuntu and after restarting( following the install) I was confronted with error 15 when grub starts.
View 3 Replies
View Related
Oct 4, 2009
I have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
View 2 Replies
View Related
May 3, 2010
Had 3 partitions on a hard disk. Booted vista & deleted the windows 7 partition & then expanded the vista partition into the windows 7 partition. Vista kept working but when i rebooted grub starts to load & gets an error 17. How do i recover?
Previously grub would come up & give me the choice of ubuntu or vista. If i selected vista i got the choice of vista or windows 7.
View 5 Replies
View Related
Sep 30, 2010
I have windows Vista and Ubuntu 9.04 on my asus laptop and use grub as boot manager. I tried to reinstall windows vista with the recovery CD delivered with my laptop in order to just get rid of the old installations. The Installation was OK, however when rebooting windows doesn't come up printing the error could not load GRUB Error 22.
Now I think I should remove grub from teh master boot record, and the system will supposedly work.My question is is this a solution and how do I reformat the master boot record? Can I do it with the Ubuntu instalation CD?
View 6 Replies
View Related
Feb 11, 2010
How do I log all start-up text from when Grub starts to when my desktop appears?
View 2 Replies
View Related
Jun 20, 2011
I have Windows Vista in a primary partition & Fedora 14 in a logical partition.
Recently, I increased the size of the extended partition and created another logical partition inside it. I formatted the new logical partition from Vista.
After reboot, instead of the list of operating systems, I started getting "grub>"
I searched on the internet and modified entries in /boot/grub/grub.conf, from (hd0,4).. to (hd0,5)..
I still get the grub prompt, but if I enter " configfile (hd0,5)/boot/grub/menu.lst " it shows the os list & I can use Fedora.
How can I configure the system so that it shows the list of os instead of "grub>" ?
View 4 Replies
View Related
Aug 8, 2010
After deleting a ntfs partition, grub is giving me troubles. My fdisk -l gives:
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 3824 30716248+ 7 HPFS/NTFS
/dev/sda2 3825 121600 946035720 f W95 Ext'd (LBA)
/dev/sda5 3825 4716 7164958+ 7 HPFS/NTFS
[Code]....
I have one harddrive and a DVD drive. In the bios, the harddrive is mentioned first. So (hd0,5) should point to the /dev/sda6.
BUT when I start my computer, it returns to the grub prompt. The command root gives: (hd0,6).
Why? It should be (hd0,5).
At the grub prompt I enter: root (hd0,5) and configfile /grub/grub.conf and the computer boots fine to fedora.
How can I tell grub use the correct partition?
View 11 Replies
View Related
Feb 17, 2010
I have installed the ubuntu 9.10 and the pc already have 2 win 7 OS and 1 win xp I installed the ubuntu from win xp every thing go just fine but in win 7 boat loader it detects the 2 win 7 OS , previous windows ( the xp )and the ubuntu which fails to load from win7 boot loader ( the first problem ) but it is present also in win xp boat loader so when choosing older windows the win xp bootloader let me choose between windows xp and ubuntu which works fine when choosing it the ubuntu bootloader appears with ubuntuubuntu safe modewin7 bootloader
the second problems that choosing win 7 after restarting the pc from ubuntu fail to open it begin loading with the windows logo and then just shutdown the whole pc as if i have unplugged it! the only way to let it open is to choose older windows>>> ubuntu >>>> ubuntu bootloader >>> where there is win 7 bootloader option it returns me again to win 7 bootloader but this time the windows load complete ( mostly but may shut down also!)
View 9 Replies
View Related
Aug 2, 2010
This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
View 4 Replies
View Related
Feb 5, 2011
I am newbee to linux. I am trying to executing a script which does "chroot" for an executable. But I am getting following error.
The chroot in the script is chroot /var/mnt/test /testbin/myapp
The script bails out with following error./testbin/myap: error while loading shared libraries: cannot open shared object file: cannot load shared object file: No such file or directory...I tried ldd for the application. All the shared libraries which are required for myapp are present.
View 3 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jul 3, 2011
use Fedora 15. I had installed driver for my ATI graphic card, as it was written in Fedora guide, then when I rebooted the system the bars and icons appeared with strange, changed colours (purple, green, etc). I've read that this happened because of the bad drivers, so I tried to fix it. Unfortunatelly because I'm Linux newbie and I'm also very nervous I deleted (using Fedora software manager) everything connectedtalyst from my system.Now when I try to start my computer, grub starts in text mode.My question is:What can I do? Do I have to reinstall my system or maybe someone knows how to fix it?I'm quite scared because now I can't launch not only Fedora but also Windows.(I'm writing from another computer
View 4 Replies
View Related
Jan 15, 2011
Now that I have my Netbook up and running again and all my settings in, what is the best way of doing things so I don't have to keep installing and setting things up? I have a 255 Gig Partition on an external HD. how to do it so it copies ALL of my setup onto that Partition. Do I do a Copy, Backup or Image? What is the best program to use? So all I have to do is copy ALL the directories and files from that partition to the Netbook and then reboot. Will it include copying all the Grub menu stuff that starts up when you first boot up?
View 2 Replies
View Related
Jan 26, 2010
I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
View 5 Replies
View Related
Mar 28, 2010
i reinstall it but just one of my ubuntu came.by the way i have 5 ubuntu 9.10 and 1 windows xp.how can i add my windows xp to grub loading?
View 2 Replies
View Related
Apr 30, 2010
I just upgraded to 10.04 from 9.10 and when I choose to boot to my Win7 Pro it just loops back to the grub menu. I did choose the partition that Windows is on when I was upgrading and it shows up in the menu.
View 3 Replies
View Related
Jun 3, 2010
I updated Ubuntu and part of it was an update to grub. When it came up in the installation I told it to keep the old one and left everything as it was. Then when I tried to reboot into Windows it gave an error message. So I went back into Ubuntu and reinstalled grub and now when I select Windows it just loops back to grub.
View 4 Replies
View Related
Aug 8, 2010
Recently I have had some problems starting linux, It gets to a part where it says it's loading grub and gives a countdown. I am using 10.4 ubuntu and it shows next a white ubuntu symbol. It then starts doing a system scan and gives a percentage when it gets to 33% it stops and says it can't mountall and that there is something wrong with the file system I can't get past this unless I don't even let the scan start. I think something is a file is messed up but I have no idea what to do.
View 3 Replies
View Related
Jan 24, 2010
installed my amazing ubuntu on virutalbox because i have windows. after i "rebooted" my box it took a fail and says "GRUB loading..." and never stops loading until vb eventually gets fed up and just crashes...
View 2 Replies
View Related
Feb 27, 2010
I have UBUNTU 9.10 and WIN 7 installed on my computer. I turn computer on, choose UBUNTU, do what I need and shut down computer (or reset - doesn't matter). Turn on computer again and get message:
GRUB loading.
no module name found
Aborted. Press any key to exit.
Operating System Not Found.
So I turn comp from Live CD, install GRUB and after resetting computer everything seems fine - but unfortunately not for long. Next reset and the problem is back again. The problem only occurs when I choose UBUNTU. There is no problem with WIN 7...
View 4 Replies
View Related
Mar 20, 2010
I have been running Ubuntu 9.10 ever since it was released, on my HTPC. However, for some reason when a new kernel comes out and I upgrade to it GRUB 2 doesn't load the newest kernel but just loads the old original kernel that came with it when I originally installed 9.10. I have confirmed that the newer kernels are installed by editing the GRUB 2 command line at startup (just a temporary fix) and all worked well with the newer kernels. How can I make GRUB 2 load the newest kernel by default. On my laptop running 9.10 it has loaded the newest kernel by default ever since I installed it but my HTPC just won't cooperate.
View 3 Replies
View Related
Apr 10, 2010
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading.
error: no such partition
grub rescue> _
Have I killed my computer or is there some way I can fix it?
View 5 Replies
View Related
