My Computer is Dell OptiPlex GX270
Processor 2.9 cache 1 MiB
Ram 512 MiB
Hard Disk 160 GiB
installed version : Ubuntu 10.10
In standby CPU status "CPU History" over than %30 to %60 <- this status from system monitor - Resources tab.
When i install any software from terminal or deb package or install updates CPU status be over than %90 and the machine go very slow and stops working. and after installing is finish i can use the computer without problems ...!
Also if i open music files when i browsing the internet my computer be slow.
I installed Windows XP also on my machine and there was no problems!
I just installed Ubuntu 11 on my Acer timelineX 5820T, core i3, 2.4ghz, 4gb ram, 250gb hard drive laptop.
I installed it side by side with Windows 7.
After the install Ubuntu works really, really slow on the internet. Internet speeds of like only a few kb per second. It took about 10 minutes to download a 21.2MB file whereas on Win7 I'd be done in a minute or two. Also seems to run much slower as well...
Im trying to install ubuntu studio 11.04on my new dell. it finishes and boot,just incredibly slow. maybe 10 min to load after login. im able to update, i thought maybe it would fix it with driver updates. still nothing. the only thing i did so far was "pci=noacpi". and that did nothing.
Here is my system. dell inspiron m5010 (64bit sys) amd phenom(tm)IIn850 tripple-core 2.20ghz ati mobility radeon hd 4250
I'm an Ubuntu user since Jaunty, and I've always upgraded my system (NOT fresh install). Everything went fine, but yesterday I upgraded to Lucid. My only concern -for now- deals with startup time. I'm a desktop user (Core2@3GHz) so I think I should boot in less than 10 seconds. Anyway, boot time is 30 seconds - not too much, but there is definetly something wrong with tools I don't know (ureadahead, plymouth, etc.). Attached is my bootchart: can anyone explain me what's wrong?
Also, I don't even see a plymouth Ubuntu themed bootsplash: I only see a blank (black) screen standing for seconds, then I see the bootsplash for less then half a second, then GDM appears :S Not crucial -I know- but how can I fix it? (I don't know if it's related, but I can see the animation at shutdown)Finally, GNOME desktop takes too long to load. I don't know why, but there are 15/30 seconds in between login sound and a usable desktop (with panels and icons, I mean).Please help me, I don't want to do a fresh install. Boot speed is not a dial with desktops - I know - but it can be a symptom that my system is a bit a messy (and I don't like it, since I installed Jaunty less then 1 year ago). (!Forgot! I also installed grub2 by hand
Whenever I transfer a movie into my 16GB USB flash disk, my whole system becomes windows-like and unusable!
When i drag the file(s) into the USB disk folder, it starts out fine and pretty darn fast (25mb/sec) then slowly decreases until it's unbearably slow (3m/sec) and as a side effect my whole system starts deteriorating. I basically have to wait for the file to finish transferring before i can use my desktop again!
This has been happening with every version since Karmic (all 64bit)- I put up with it because I don't use the USB stick that much.. but lately it's been my go to source for transfering large files to/from work.
I have an old Dell desktop that normally runs XP. It has 512mb of ram and I think its a Pentium processor. From what I understood Linux is a simpler, and more stable and efficient OS so I figured I'd give it a shot. First I tried the Wubi installer and got nothing but error messages after the install and it kept freezing and eventually just wouldn't boot at all. So then I tried the full install from disc. Better at first. I soon discovered all the customizable themes and went a little nuts trying to make one user exactly like W7 and the other exactly like OSX leapord just for fun.
I noticed significant slow downs and after some research I came to find that it was taxing my old graphics card. So I setup a user with no changes, still really slow. Then I deleted and reinstalled and I'm now using the bare bones UI. Its still really, really slow. I get lots of mouse drag and just now it took about 7 seconds for the applications window to drop down and 35 seconds to open the home folder. Also about 10 seconds for right click window to drop down.
I'm trying and I really want to like Ubuntu but as of now I'm finding it unusable for even the most basic of computing. I realize my computer is old but xp still runs like gangbusters. So maybe Ubuntu is designed for more modern hardware and more ram, am I screwed? I was looking forward to playing around really customizing my GUI but more importantly I was planning on putting on my girlfriends laptop with similar specs. Her computer needs a reformat but she doesn't have the XP disc. As it stands her XP is still much more usable even with all the viruses then Linux is as a fresh install on my desktop. I don't want to delete xp and end up with a slower linux.
I've been trying to install Ubuntu 10.10 on my machine from a USB Stick, but the install process has been insanely slow. Much slower than any of my previous Ubuntu installs, well over 10 hours before I finally quit.Here are my specs:
AMD Athlon II X4 640 Propus 3.0GHz Socket AM3 GIGABYTE GA-880GMA-UD2H AM3 AMD 880G SATA Western Digital WD5000AAKS Mushkin Enhanced Silverline 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 PC1333
I've run Memtest86+ no issues.I'm attempting a Windows 7 Dual boot. Windows 7 installed fine. I've split the drive in two 3 partitions via gParted, 50% NTFS, ~50% Ubuntu and 10gig Swap.These operations seemed to work fine.I've heard of other Western Digital drives having Ubuntu issues. Could this be related?
I recently did a fresh install of 11.04 (previously had 9.10) Everything works fine and dandy (I didn't have to do much tweaking at all to this version!!!) Except: When my computer resumes from the screensaver (GL text, set to display time) it takes nearly a minute for my DE to show up. When it finally does show up it takes another minute or more for the computer to run at normal "speed". A lot of lag and unresponsive mouse etc. After a few minutes the computer runs fine...I am not so linux savvy, what I know I have gleaned from forums such as this one. Is there something that 11.04 runs as default that I need to shut off to stop my slow resume problem?
I was messing around couple linux distros and a desktop earlier today. When I booted from the Ubuntu disk, it seemed to take like 2-5 minutes on each screen. So was basically taking like 10 minutes before I even got to the disk's menu. When i booted the machine off of openSUSE 11.2 disk it booted nice and fast, then installed without a hitch.When i put the Ubuntu disk into my laptop it booted fast and fine there.I'm just curious if anyone has any ideas why that desktop would seem to disagree with a bootable Ubuntu disk like that. Those things are obviously designed to work with near anything. It's a standard IDE CD-ROM, 7600GT, IDE hard drive, all pretty standard stuff.
I've been butting heads with a problem for about a week now. For a while I've been running a DAW (Digital Audio Workstation) off a 4 GB Kingston DataTraveller Flash Drive. Using partimage, I've managed to install this Maverick Ubuntu and load it with Audio Stuff from UbuntuStudio....plus wineasio and some Windohs audio software, then save the images of the partition usb stick (win32 livecd partition and casper-rw persistence partition).I've also done the same thing with a linuxaudio distro called pure:dyne. I restore and use either according to my needs. Obviously 4GB isn't a lot of space....so over the holidays I went out and bought the 8GB version of the DataTraveller. Two weeks later I'm still trying to get things to work right.
The problem is that when I create the casper-rw partition and boot into Ubuntu things slow to a snail's pace. Ubuntu takes over 5 minutes to boot up. Installing anything with Synaptic or whatever takes 5x as long as with the 4GB version of the flash drive. Everything works rather well....although multitasking is laborious, if possible at all. At first I thought it was the usb-key itself. After returning it (twice) I realised this just wasn't the case. 3 different flash drives had performed exactly the same way. Googling around over the last few days I found I'm not the only one to come across this problem...but still no solution.
What makes things weirder is that today I installed pure:dyne on that same stick and it works perfectly...running as smoothly (almost) as from a normal harddrive. Weirder still is the fact that pure:dyne is built from ubuntu itself...the only difference (as far as the whole usb-creation business goes) is that the persistence file/partition is named "live-rw" instead of "casper-rw".
I'd settle for pure:dyne...except it's built on "lucid" not "maverick"....two of my 3 computers have graphics driver issues with pure:dyne and the soundcard support is spotty (which is strange for a distro specialising in audio production) and wine (and therefore vst/i support) is not nearly as good. If anyone has any clue what goes on here I'd be very interested. In the meantime I'll run pure:dyne on the one computer that likes it.
I can install my epson cx5600 on ubuntu 9.04 ... but! it prints REALLY SLOW! ... its really slow people...i also try to print under economic quality ... its the same! should i trough it to teh trash ?
dell support thread was a damn joke, i m trying to put ubuntu on a new dell inspiron m5010 using wubi. everything was going great untill after the install on reboot the login screen takes 5 min to fully load. after i log in, it takes another like 5-10 min to fully load. i already tried pci=noacpi that did nothing. i tried loading in ubuntu classic (with no effects) that helped some, but still slow. any thoughts?
dell inspiron m5010 (64bit sys) amd phenom(tm)IIn850 tripple-core 2.20ghz ati mobility radeon hd 4250
We have 2 machines (quad core intel i5) running suse 11.2. They were clean installs and both suffer from this problem on around 50% of boot-ups. Other times, the system boots quickly and is fine.
Basically, one of the CPU's gets hammered to 100% (according to KDE system monitor) for around 10 minutes after boot up. Although the other three CPU's seem mostly idle, the system is very slow, to the point of being unusable until suddenly the system recovers and runs normally.
I've looked at 'top' and the KDE system monitor and both show no process taking more than a few % of the CPU. So it is a mystery as to what is taking up so much CPU and why it does it some days and not others !
One other thing, if you try to run virtualbox during this time, it (eventually) says that the kernel drives are not loaded - so possibly the kernel is stuck loading drivers. Infact, from dmesg, I can see that the system is still booting but other than the extended time stamps, the only obvious difference between a good boot and a bad one seems to be the line :
Code: [ 141.794727] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. which is there after a slow boot. The sound works ok (as does everything else).
With the upgrade to 11.3 x86_64 I was very disappointed to find that the time it took to log in to KDE once I entered my password skyrocketed. On 11.2, what used to be a speedy two seconds before I would see the desktop has now turned into 30 seconds, or more sometimes: today it was closer to 45.
disable powerdevil or to disable the KDED modules, both located in the service manager.
Disabling powerdevil does bring my login time back down to where it was in 11.2. I have several questions now: Powerdevil is described as a "laptop power management daemon" in the service manager. Is it truly only for laptops? What features does powerdevil provide? If I disable it will my CPU frequency scaling and other power management features still work?
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
I have installed jessie on a couple of machines. One is configured as the NFS filesystem exporter and NIS server. The other one, I am trying to configure as NFS and NIS client. NFS does not seem too much of a problem, I can mount the exported filesystem to a directory in the client and unmount it, but when I install NIS the system becomes very slow. Any command preceded by "sudo" takes a very long time (a few minutes) to complete. Then, upon rebooting the system, it reports many services failed to start (login, accounts, modem manager, avahi, network manager, exim). When if finally completes, I get a terminal login, instead the graphic login window.
I just install Fedora 12 x86_64 from the Live CD. KDE and all was just fine until I installed the nVidia drivers. Now when I click on the menu launcher on the bottom-left corner of the panel, the menu takes around ten seconds to come up. I can make do with the Application Launcher widget, but it's a little annoying since it's up all the time. Everything else seems fine.
i was very cautious in installing 11.2; i had previously evaluated sled10sp3, it was great but for some reason it never connected to a dhcp server to get the internet. my fear from installing 11.2 was that i blindly trusted lilo for years as my boot loader (dual booting with xp)
so i took the chance and installed 11.2 with lilo. didn't work; so i went back and installed graphical grub; didn't work either; then installed the system again but with the option "use trusted grub" (which is a text-only boot loader) which worked like a charm on my system.
the thing is, that my system overall boots quickly, except in the part when it starts detecting the hard-disk; which takes 4 minutes detecting the disk and partitions. when it "fails" detecting or doing something with the disk, it continues to boot rapidly then.
My system specs: - opensuse 11.2 & xp - default kernel 2.6.31.5-.0.1 using gnome desktop 2.28 - amd athlon 64 x2 dual core processor - 2.5Gb Ram
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf: Code: Section "Device" BoardName "ATI Radeon HD 3200 Graphics" Driver "fglrx" Identifier "Device[0]" Option "XAANoOffscreenPixmaps" "true" Option "Capabilities" "0x00000000" Option "OpenGLOverlay" "off" Option "FSAAScale" "0" Option "FSAAEnable" "off" Option "VideoOverlay" "on" Screen 0 VendorName "ATI" Rolling back to kernel 2.6.27.37 fixed the problem.
Kde 4.3.1 started booting slow, real slow, real slow.. and logging out real slow. I tried un-instsalling everything since my last update. I then tried moving to the kde 4.3.5. Same problem. Any clues or should I just do reinstall? I am running a ACCER laptop Intel(R) Celeron(R) CPU 550 @ 2.00GHz. I have been using Linux for 10yrs.
Using 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
Anybody else experiencing slow login times with 11.3 KDE? It's taking 40 seconds from the login screen to the desktop. It's a clean 64-bit11.3 KDE install.
I've some problem with openSUSE 64bits and more precisely extreme slowness.
At first, it was during the Installation (net install), each action (click on a button for example) was followed by a global freeze (though mouse was not). The entire configuration (the first part of installation) took me about 1 hour... At that time, i was thinking "ok it's just installation, it will be fast and smooth in the end..."
I was wrong, the system is as slow as the installation but weird thing: it's only when I log on that the system slow down. I mean the booting process doesn't seem slow and I've not seen any errors. So what's going on ?
I don't know if it's the cause or the consequence but i noticed that my cpu was always at 90+ % except when I don't do anything (useful isn't it?) so it may be because the system doesn't manage my cpu the right way. (it's just an hypothesis)
Now configuration information:
Software:
I tried to install openSUSE 11.4 64bits with the net install downloaded yesterday from the official website. I chose Gnome. I don't have swap (see hardware below) and I have a different partition for / and /home
Kernel: 2.6.37.1-1.2-desktop
Hardware: Asus X5BVN laptop Intel Core 2 Duo P7350 @2GHz 4GB DDR2 RAM (enough ram -> no swap) nVidia GT240M 1GB Intel WiFi Link 5100 Atheros AR8131 Gigabit Ethernet (odd thing: during the installation it wasn't this name)
After installing Slackware 13 and configuring it as a router, I'm getting very slow internet speeds on my clients. It takes forever to connect to a website or downloading 100mb bin file also takes forever. On the Slackware box the speed is fine though. When I boot from my previous Slackware 12 drive, the speed on the clients is ok again.
I have compared config files from my old and new installation and haven't found a difference. from other posts I learnt that disabling IPv6 by adding it to the blacklist could help. But this didn't help me either. I have also compared a traceroute on both installations. This also doesn't show a (big) difference.
The only difference I have found is that in my Slackware 13 setup the following modules are loaded while with my old Slackware 12 lsmod is empty.
Code:
The only thing I can think of is a missing option in the kernel. I have used the huge-smp from the Slackware DVD, assuming this would have all the important stuff enabled by default. It this right?
Some additional info: eth0: nVidia Corporation MCP51 Gb onboard Gb NIC, connected to LAN (static) eth1: 3COM 3C2000 Gb NIC, connected to cable modem (dhcp) dhcpd is running to configure clients in the network arno-firewall installed
Files I have compared with my old (working) system:
I have good experience in microsoft enviroment, now tiring to use linux, i tried Ubuntu 9.10, OpenSuse on different computers bur there is same big problem: Very slow download speed compared to microsoft.same file at same time downloaded by microsoft winxp toke incomparable short time. for example file 5.5MB attached to e-mail on Yahoo toke ~1minute to download on winxp computer,same file at same computer but with Ubuntu takes more thane 30minutes!
I just did a fresh install of 10.04 on my system and everything runs perfect and exremely smooth, however the update manager and firefox are taking forever to load (the progress meter reads something like 2d 17hr 23m), however the internet connection is very fast.the logs are all insanely clean with the fewest errors I've ever seen, so this shouldn't be too terribly difficult to solve. Also I seem to be having a problem with the font on Firefox, every fourth letter or so has a bright streak in it. Anyway, that might be related or not but my main concern right now is getting my download speed up to par?
I have Fedora 14 installed on my s/m with the default gnome desktop environment. Now, I want to install some KDE applications which I found to be very useful. I want to install KDE from fedora 14 DVD as my internet connection is very slow. It was a failure when I tried pointing the yum.repos.d/fedora.repo file to DVD to install using yum. Should I create a repository like what we do in RHEL to configure yum server(How to do it in fedora ???) Or is there any other method to install KDE repository on my system.
