Ubuntu :: 10.04 Can't See Wireless Connections - Dropping Connection
May 7, 2010
I was having trouble with my wireless connection, it was dropping every 5 minutes or so after upgrading to 10.04 and ran across a thread where someone recommended entering
Code:
sudo apt-get install linux-backports-modules-wireless-lucid-generic
After entering the command I have lost all ability to even use my wireless ability even if it was for 5 minutes. Now I am using a different kernel, internet still drops every 5 minutes, but would love to get my internet up and running again.
I am using a Dell Studio XPS Laptop
Code:
*-network
description: Ethernet interface
product: MCP79 Ethernet
[Code]....
View 9 Replies
ADVERTISEMENT
Jan 24, 2011
Just installed kubuntu 10.10 on a dual boot with winxp on my asus r101 netbook.
wireless connects perfectly, but after roughly 30 seconds, i cant access any address or ping an url or ip. however network manager says im still connected. so i click on network manager, and click on the wireless connection, it then reconnects in a couple of seconds, and all is good again. i carry on browsing, and 30 seconds later the same happens again!!!
my wireless signal is fairly week, however connection works everytime and in xp this is not an issue.
View 4 Replies
View Related
Nov 4, 2010
My wireless connection keeps dropping is very unstable, signal strength goes up and down here is the info i got from the terminal
*-network:0
description: Ethernet interface
product: 82801DB PRO/100 VE (MOB) Ethernet Controller
vendor: Intel Corporation
[Code]....
View 3 Replies
View Related
Feb 8, 2011
I'm using an Acer Aspire 3000 since Opensuse 9.3. Wireless connection was fine with ndiswrapper. I upgraded to 10.0 and wireless was perfect with the broadcom firmware. Now I just installed openSUSE 11.3 and my wireless connection became a nightmare: connection drops multiple times in a day and network manager remains stuck in "Interface Configuration". Sometimes I'm asked for the wpa password but Network Manager is unable to reconnect until I disable and re-enable my wlan card using the killswitch. The access point is the same zyxel b+g I own since 5 years! I just bought a new eeepc and I installed on it openSUSE 11.3 too. The network connection behaves the same!! The Network Manager says "Interface configuration" and I must switch the wireless off and on to have the network back. I made a radio scan and I'm using a channel on my own. I also tried to disable dhcp without success.
ACER
# uname -a
2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 athlon i386 GNU/Linux
# lspci -vvvnn
00:0b.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410 [1468:0312]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge .....
View 9 Replies
View Related
Jan 28, 2011
I am having an issue with my wireless connection dropping about every 2 minutes (web pages timing out), then working for a couple of minutes then dropping again. The connection icon in the task bar says I'm still connected at about 70%.I have a dual boot system and the wireless works fine in opensuse but not in Ubuntu 10.10 I have an Asus G50vt-X5 laptop but I am not sure about the wireless chipset.
View 10 Replies
View Related
Jan 20, 2010
as the titles states my wireless is dropping out but the networks manager is still saying i have a connection. the only way i have been able to be on the network every minute or so i have to manauly disconnect and reconnect to my wifi. under my windows 7 and vista installs the wireless card works fine now my card is a dlink dwa-547 and it uses the arthores chipset, it is encprtyed wifi, wpa2 aes on a n/g based network
Code:
peter@ubuntu:~$ sudo lshw -C network
*-network
description: Wireless interface
product: AR5008 Wireless Network Adapter
[Code]....
View 8 Replies
View Related
Oct 27, 2010
I have a Thinkpad W500 with:
Code:
Network controller: Intel Corporation Wireless WiFi Link 5300
I have Ubuntu 10.04 32bit installed:
Code:
Linux dani-laptop 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 i686 GNU/Linux
It has been working fine since I installed 10.04 but recently (end of last week I think) it stared dropping the wireless connection very often. So it will disconnect and reconnect, but I can't seem to find a pattern, sometimes it goes for hours without an issue and sometimes it does it several times in a row. Below is an extract of syslogs from when this happens. But not sure if what I need is there... the only weird thing I can see is:
Code:
Oct 27 18:58:33 username-laptop wpa_supplicant[1296]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Code:
Oct 27 18:58:32 username-laptop wpa_supplicant[1296]: Trying to associate with 00:1e:be:a6:c0:0f (SSID='accessp' freq=5280 MHz)
Oct 27 18:58:32 username-laptop NetworkManager: <info> (wlan0): supplicant connection state: completed -> associating
Oct 27 18:58:32 username-laptop kernel: [123835.372217] wlan0: deauthenticating from 00:1e:7a:6f:d9:90 by local choice (reason=3) .....
Oct 27 18:59:29 username-laptop ntpdate[4765]: no server suitable for synchronization found
View 6 Replies
View Related
Mar 21, 2010
Toshiba A215 laptop
Driver is rtl8187
I really need to make the connection constant and non-dropping. I've had opensuse 11.2 since march 7 2010, figured out most of it by lurking and reading threads didn't want to make threads but I really don't know what to do to make this connection stay on. I am posting Terminal commands from when I am both on and offline.
How I attempted to fix this issue myself: I downloaded wireshark, wicd,knetworkmanager. Tried running all of them nothing worked. I went into Yast and switched off networkmanager and went traditional still nothing. Tried adding opendns to traditional. nothing. Went back to NM would get online then after an unknown time I'd lose connection even though NM said i was still connected. Offline running terminal commands from what I read on here in other threads and stickies
:~> ping -c 5 66.70.73.150
PING 66.70.73.150 (66.70.73.150) 56(84) bytes of data.
From 192.168.1.28 icmp_seq=2 Destination Host Unreachable
From 192.168.1.28 icmp_seq=3 Destination Host Unreachable
--- 66.70.73.150 ping statistics ---
5 packets transmitted, 0 received, +2 errors, 100% packet loss, time 4000ms
, pipe 2
:~> /usr/sbin/iwconfig wlan0 | grep Mb
Bit Rate=11 Mb/s Tx-Power=20 dBm
:~> sudo /usr/sbin/iwconfig wlan0 rate 24M
:~> /sbin/lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Toshiba America Info Systems Device ff10
Flags: bus master, 66MHz, medium devsel, latency 64 .....
View 9 Replies
View Related
Aug 8, 2011
Sorry if this has already been solved;answered anywhere else - I tried looking it up but to no avail. The problem persists & the hints I found around the forum did not provide a solution to the case, neither other net solutions i looked up I run Winblows at the lab and sometimes take my Ubuntu PC with me. There is an open Wireless network where they set MAC permission, and there's no pwd to access. It so should be fairly easy to change m MAC and access it, right! No. I run ifconfig and macchange, successfully change my MAC addr BUT the connection drops! Then if I change it back (MAC to my original address) it goes back online. And yes, I shut down the service -- "ifconfig wlan0 down" and then up..WHAT ON EARTH am I doing wrong??? No webpages touch this 'trouble-frigging-shooting instance!
View 2 Replies
View Related
Apr 30, 2010
using Hardy Heron on a old Thinkpad T41.This is a fresh install system and I noticed it kept dropping wireless connection. After google around, seems like this is a common problem? Then I switched to wired network, and turned out the same thing happens again. Looks like doesn't matter wired or wireless, it kept dropping itself from time to time.
fter checking syslog, I found something interesting...it kept complain eth0 is invalid, then it said it found a better connection?I found that extremely weird..
Code:
Apr 30 06:24:32 support kernel: [ 961.236895] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[code]...
View 1 Replies
View Related
Jan 5, 2010
In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support
I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.
View 9 Replies
View Related
Mar 12, 2011
Using Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.
View 5 Replies
View Related
Mar 9, 2010
I have a Dell Inspiron 6000 laptop running Fedora 12. Recently my wireless connection has begun dropping every few hours and not reconnecting. After trying for about 30-45 seconds, the WPA password prompt comes up but still doesn't connect.
Fedora release 12 (Constantine)
Kernel Linux 2.6.32.9-67.fc12.i686
GNOME 2.28.2
Memory: 2.0 GB
Processor: Intel Pentium R 1.60 GHz
View 14 Replies
View Related
Mar 10, 2010
I've installed Samba on my Home Theater PC but none of my other computers can stay connected to it. Sometimes it drops connections right away, other times it takes several minutes.either way, a pc will never stay connected longer than 20 minutes.
I have the following OS's in my home
OSX Snow Leopard
Server 2003
Server 2008
Windows XP
[Code]...
View 6 Replies
View Related
Jan 30, 2010
Here is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....
View 2 Replies
View Related
Jan 5, 2011
Our school has a small 3-computer lab in the preschool department where the kids come in and simply use Firefox to access some educational websites. Due to logistics in the building they're in we had to go with a wireless solution in the following setup:
- Apple Airport Extreme WAP
- 3 HP DX2200 desktops running Ubuntu 10.10
- 3 Trendnet TEW-664UB USB wifi chips
All was running great until we got the computers installed on site and now they are constantly dropping the wifi connection if they are even able to connect at all (which is highly hit or miss).
10.10 picked up the USB wifi card as soon as we plugged them in and showed the available networks, but actually obtaining and keeping connections is a nightmare at the point. The computers are in very close proximity to each other (only about 2-3 feet between computers) and the WAP is in the next room (other computers and mobile devices are able to connect to the WAP with full signal from the same room/location). Thats about all the detail I have off the top of my head, could this be an interference issue with the wifi cards or does this sound like an Ubunutu issue? Again we have had multiple other devices in that room all able to connect seamlessly.
View 7 Replies
View Related
Jul 20, 2011
Just had an issue crop up where connecting wired network seems to stop wireless connections from getting an IP (happens on multiple networks both while the cable is plugged in and once it's been unplugged; also persists across reboots). Machine is a Dell Latitude 2120n with UnionFS running. Connection was working fine prior to the wired connection
View 3 Replies
View Related
Oct 25, 2010
I did a clean install of OpenSuse 11.3 a couple of weekends back. Everything is working great except the SSH server.Once I installed ssh, it appears to accept my connection, allows me to log in, and then freezes Putty, not allowing me to type anything into the terminal.If I wait several minutes, I'll get a message saying that the connection was closed. After that, the server won't accept connections.Sometimes it'll start accepting connections again, but after a while, the connection will close on its own. Other times, I will be unable to get a connection until I restart the server.If you guys needs any more information, please let me know. What could be causing this odd behavior?
View 3 Replies
View Related
Apr 7, 2009
After doing a clean base install of CentOS 5.3 on a test server, I started having problems with network disconnects. While SSH into the box, I would be intermittently disconnected from the SSH session. At first I thought it was my workstation, but after running ping tests from multiple machines on the network to the test box, it became apparent that the test box was dropping packets. When I lose my SSH connection, the pings also start timing out, for a few seconds, then start again. I increased the console logging and I can see when the ethernet port goes up and down when I physically disconnect the cable, but it does not go down or lose link when the disconnects occur. I changed the NIC ports being used and had the same result. I tried with a different switch with same result. I reinstalled CentOS 5.2 and the problem went away.
Upon further investigation, I found that CentOS 5.2 is using the e1000 driver for my NICs and CentOS 5.3 is using the e1000e driver. I resinstalled CentOS 5.3, and tried using the e1000 driver instead of the e1000e but it no longer detects my NIC's... apparently they moved the support from e1000 to e1000e. I have spent the last 3 days googleing for info on this problem and have not found a solution. Any recommendations? Should I submit a bug report?
[Code]...
View 12 Replies
View Related
Jun 20, 2009
I'm trying to get wireless working in F10. Using pci wireless card with Atheros chipset. To be sure, I tested this hardware with a PCLinuxOS Live CD. Connects to AP perfectly.
Hardware drivers seem all OK in F10, and ifconfig shows wlan0 as expected. When I use the Wireless-Assistant 0.5.7 there's no connection.
Actually, the AP logs show numerous connections and disconnections.
Preferring CLI, I'm using a drop-dead simple wpa_supplicant.conf as follows :
Should Ipost some debugging output from wpa_supplicant -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -d
View 2 Replies
View Related
May 2, 2010
My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
View 9 Replies
View Related
May 10, 2010
Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.
View 2 Replies
View Related
Jul 11, 2011
I have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
View 1 Replies
View Related
Feb 20, 2010
I have a windows installation (partition) but have installed into freespace on the same drive using the auto-partition manager, etc, and everything is fine. I got my network going fairly easily by going Preferences > Wireless and inputting SSID and WPA encryption key (PSK). My router issues an WLAN IP, I can get on the net, I can see my other Windows PCs on the network, I can reach my router, and all is good.So after several hours of mooching about and looking at things, I have updated all the Linux packages via Synaptics (following a prompt to update everything) including GRUB. My dual boot now shows two versions of the OS:
GRUB 1.7~Beta4
Ubuntu, Linux 2.6.31-19 - generic (I am booting this one)
Ubuntu, Linux 2.6.31-14 - generic
I also set up my HP F4580 printer over wifi on the network though with slightly incorrect drivers (for the F4400 series as this was recommended at the closest match). It works, and I can print a test page no problem.The only thing is that now (since doing all that) Ubuntu seems to periodically drop my connection to the network and then request the network PSK again, but when I enter it, it spends time trying to renegotiate but fails, and then re-requests the PSK, over and over and it never reconnects. I have to reboot and then I can connect again (automatically), until it drops at some random point (like 5 or 10 mins later)
View 9 Replies
View Related
May 13, 2010
Two weeks ago I decided to ditch my XP install completely and switch to Ubuntu 10.04. So far so good, and I'm very happy with my decision. However, about 3 days ago, my wired connection started playing up. It keeps dropping out every 2 hours or so between 13.00 and 04.00. After dropping out, it immediately reconnects again (at least when I use Automatically DCHP config). From 04.00 to 13.00 it is more or less stable.
I tried resolving by reserving an IP in the DCHP Client Table in my router (linksys WRT120N). Additionally, I told the Network Manager to use the Manual configuration. Unfortunately these changes didn't help and the problems stay the same......
The daemon.log shows the following information code...
View 9 Replies
View Related
May 16, 2010
I've installed Lucid Lynx in both kubuntu and xubuntu variants, and experienced the same problem, (Note I'm also still running 9,04,on the same computer, trouble free). With 10.04, the problem is that sound playback software works initially, but drops the connection with the sound driver randomly, at times varying from a few seconds to a couple of minutes. It seems to happen regardless of whether Alsa or PulseAudio is set as default. This happens with Movie Player, VLC, Audacity, and with Flash in Firefox - they all appear to start normally, with sound, but soon fail. (Again, I don't have this problem with earlier releases, using the same computer) I know little about sound configuration.
View 5 Replies
View Related
Sep 11, 2010
I set up the web/backup server for our department and I'm having some major issues. Firstly, the server seems to be dropping the network connection periodically. I checked all of the logs and it appeared to be an IP6 issue as the only message that seemed to correlate with it was "eth0: no IPv6 routers present" in syslog. I added "ipv6.disable=1" to my boot options in menu.lst and this seemed to take care of the problem. However, I woke up this morning and the server was back down.
This didn't seem to take care of the problem. It seems to occur when my automatic backup scripts go through. I have several BASH backup scripts that use rysnc over SSH to backup several computers to the server and the server to my desktop at home. I was able to trigger the problem a couple of times running the backup script this morning. Now, I'm getting the following error when running the script, instead of losing the network connection:
Code:
Sep 11 10:22:40 chemistry kernel: [ 396.892699] BUG: unable to handle kernel NULL pointer dereference at 0000000000000118
Sep 11 10:22:40 chemistry kernel: [ 396.892715] IP: [<ffffffff811426c0>] __dentry_open+0x240/0x370
Sep 11 10:22:40 chemistry kernel: [ 396.892728] PGD 1113d5067 PUD 11458c067 PMD 0
Sep 11 10:22:40 chemistry kernel: [ 396.892737] Oops: 0000 [#1] SMP
Sep 11 10:22:40 chemistry kernel: [ 396.892743] last sysfs file: /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
Sep 11 10:22:40 chemistry kernel: [ 396.892750] CPU 1 .....
I tried booting with a previous kernel to see if that was the problem and I'm still getting this error. I've searched through all of the logs that I could think of to try to track down any software based problems and I just don't see anything. In the past, whenever I've run into such serious with a Linux box that popped up out of nowhere, it's always been a hardware failure. I've currently disabled all of the backup scripts and I'm going to see if it lasts through the weekend.
View 2 Replies
View Related
Jan 10, 2011
I've just loaded the new Hamachi2 Linux beta with Haguichi for a GUI. Everything installed & connects OK, but the connection at the hub is dropping & reconnecting every minute or so. I tried adding a line to the sshd_config file to keep it alaive but it didn't make a difference.
View 3 Replies
View Related
Jan 5, 2010
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
View 1 Replies
View Related
Sep 26, 2010
I am running F13 on my Desktop (with a Ralink RT2870 wireless card) and also on my Laptop (Acer Aspire 5738Z) and am connecting to the internet via a NetGear router. On my Laptop I can connect to the internet fine with no problems. However on my Desktop when I turn my computer on it connects to the internet fine, and works, however after some time (maybe 5-10 minutes) it disconnects and the box asking for the password reappears, then I click connect but no joy.
The connection box just keeps reappearing and it won't connect again until I restart the computer (although sometimes it takes more than 1 restart!). This is not a signal issue, as my Desktop also has a Windows partition and that connects to the internet fine and does not drop off. I have installed the RT2870 driver through rpmfusion, which didn't fix the problem, although uninstalling the driver didn't stop the card from working.
View 1 Replies
View Related
