Ubuntu :: 10.04 - 2010 New Mac Mini Dual Boot OS X 10.6
Jun 16, 2010
The new Mac Mini has just been refreshed. I'm thinking of getting one as a general admin machine, as they run very quietly. I'd like to able to dual boot it with Ubuntu 10.04 and I have a few questions. The hard-drive is 350gb. Would it be possible to dual boot with OSX on two fairly small partitions, say 50gb for each OS. Leaving a remaining partition of around 250gb to keep files on for both OSX and Ubuntu? I've read about this for windows/ubuntu dual boots, but can't seem to find much on OSX/Ubuntu dual boots and whether you can share files easily between them and having common drives for data storage. Also, general tips on dual booting a Mac Mini with Ubuntu 10.04 would be welcome (not a lot out there that I can find).
View 8 Replies
ADVERTISEMENT
Mar 10, 2011
I've been attempting to boot Ubuntu on my Mac Mini with absolutely no success. I tried 32-bit and 64-bit versions of 10.10 and 10.04. In all cases, I see the little keyboard and man at the bottom of the screen and then the screen goes black (i.e. my monitor stops receiving input).
My monitor is connect via the HDMI-to-DVI convertor, so is this a driver issue related to that?
View 3 Replies
View Related
Nov 25, 2010
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies
View Related
Nov 9, 2010
I have used ubuntu for som years now, I thought It could be nice to try a kde focused linux distro, so I installed mandriva spring.
The problem is that only the ubuntu LTS boots, and the mandriva part just stops after (and I don't know where to start, and what is relevant to write)
View 3 Replies
View Related
Mar 6, 2011
I would like to dual boot mepis 8.5 and mandriva 2010.1. How do I set up my partitions and how do I install the distros so I can go from one to the other. I have a 40GB hard drive, which has been wiped clean.
View 4 Replies
View Related
Jul 2, 2011
I bought my wife an HP Mini [URL].. and want to get Ubuntu Netbook running on it. It comes with Windows 7 Starter, which we want to retain because Netflix won't run with Linux (gives you some BS error about "your browser is compatible, but your OS isn't"). So, I'd like to dual boot.
My desktop right now runs Kubuntu, and then I can boot in XP using VirtualBox OSE. Owing to the fact that the netbook is down on power relative to my desktop, doesn't seem like a good idea on the netbook, hence dual boot. I've seen a lot of "help, I just screwed this up!" threads, and since HP wasn't kind enough to send along a disc with Windows 7 on it, I need to get this right the first time. So, I'm going to post what I'm planning to do, let me know if I'm going to mess this up. I've compiled the below looking through a bunch of previous threads.
1) Defrag Windows drive
2) Use Windows 7 software to shrink the Windows partition
2b) Do NOT create a new partition using Windows software, just keep it unallocated
3) Boot off of USB key with Ubuntu in it, select unallocated space for install
Questions:
1) When I boot the computer up, I should get a GRUB screen asking which OS I want to boot into, correct?
2) I'm downloading 11.04 right now...anything to watch out for?
3) I couldn't find an install file for Ubuntu Netbook, do I make that selection during the install?
View 5 Replies
View Related
Jan 28, 2010
I'm looking at the 2009 apple mac mini ([URL]and wondering if anyone has gotten dual head working? I'm putting two 17" or 19" monitors on, so nothing too adventurous. I know that I'll require the "Mini-DisplayPort-to-DVI" to get Dual DVI Adpaters, but I wanted to confirm that dual head would be supported from the start. I'm aware that there are issues with rebooting the device, possibly as a result of the wireless drivers. That doesn't bother me. Dual-head is a requirement I intend installing 9.10 and dual booting macos for firmware updates.
View 1 Replies
View Related
May 28, 2010
After performing the periodic update on 2010-05-26 including libc, libc6 and libgtk2.0 my system fails on boot with the following error message:
Code:
run-init: /sbin/init: no such file or directory
Kernel panic - not syncing: Attempted to kill init! If I boot from the 10.04 live CD, all partitions on the hard drive are visible, mountable, and pass all file system checks.
View 2 Replies
View Related
Feb 6, 2010
how do i install mandriva 2010 with the help of pen/flash drive? i hav the ISO image but my DVD drive is not working so burning it to a disk is not a sol for me i m using win 7 so the other method shown is not working
View 6 Replies
View Related
Feb 4, 2010
After upgrade from MDV 2009.1 to MDV 2010 a bunch of available kernels that can be selected are listed at boot. I think that these are still installed but I really don't need them listed. I would like to get rid of the list of extras. I've had a look at /boot/grub but I can't figure out what.
View 11 Replies
View Related
Jan 11, 2010
I'm trying to boot my Dell Mini 12 from a USB boot disk with the ubuntu-9.10-alternate-lpia.iso image installed (I've also tried ubuntu-9.10-netbook-remix-i386.iso). I turn the machine on, press F12 to get to the boot menu, then select the USB disk. After this I just get a blinking cursor at the top left of the screen and nothing else happens.
View 9 Replies
View Related
Jan 21, 2011
I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after I added a few things. I intend to use it on machines other than my own. But the GRUB boot loader was installed to the main system on my machine and it is booting from there.
During the installation it was said that the bootloader can be installed on a floppy. So I started a new 2 GB stick and tried to install the boot loader on a floppy but my computer does not recognize floppies anymore (seems to be a wider problem with recent distributions).
So I tried to install the bootloader on a different USB stick and and this also did not work. Cannot find recent and relatively easy way to install GRUB boot loader to a stick.
View 3 Replies
View Related
Sep 19, 2010
I have a Mac Mini with OS X that I had dual booted successfully with Windows XP for my family. I am a rookie at all this but learned a lot Googling sites that walked me through things. I got bold and tried to triple boot the Mac Mini with Ubuntu 10.04 using rEfIt. I was following this website. [URL].
MISTAKE #1
All was done to the letter until I accidentally realized I had clicked install on step 8 before I clicked "Advanced" to check off the "Install Boot Loader" and changing the device to the partition I had made for Ubuntu (/dev/sda3/). It finished installing and rebooted with the rEFIt screen with Mac / Ubuntu /Windows icons. Mac started, but both Windows and Ubuntu showed a black screen with blinking underscore in the top left of the screen. I went back to the Mac OS and in Disk Utility I noticed that the Linux-Ubuntu name on the partition I had made changed to "DiskOS3".
Mistake #2
I panicked and used "Erase" in Disk Utility on that partition using the Zero Out Data security Erase option.
Mistake #3
Then I reinstalled the Ubuntu 10.04 cd into the drive and did the install boot loader steps. It started up but the rEFIt screen now has Mac/ two Ubuntu penguins/ and Windows icons. Mac starts and works, but both ubuntu icons and Windows leads to the black screen with blincking underscore cursor.
Here are specs and data for hard drive below:
Hardware Overview:
Model Name: Mac Mini
Model Identifier: Mac Mini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.0081.B06
SMC Version (system): 1.35f0 .....
View 1 Replies
View Related
Mar 10, 2010
Here's my problem:
New HP Mini 110. Atom N270. 2Gb RAM. 160Gb HDD
I've installed OpenSUSE 11.2 Gnome Live from a USB stick. The installation worked well, but after the first reboot, the graphical loader just hangs with the progress bar having moved only a couple of pixels. Only way to recover is to power-off - CTRL+ALT+DEL does nothing.
When I press 'Esc' on boot, to display the boot messages, I see the boot hangs at the following point:
"Loading drivers, configuring devices:"
trying again, this time adding the boot option "acpi=off" as recommended in another thread, gets me a little further, but the boot now fails at the following point:
"Set System Time to the current Hardware Clock"
Finally, booting in Failsafe mode gets all the way to a text mode login, but this is hardly a long-term work-around.
Has anyone got openSUSE 11.2 working on an HP Mini 110, or at least seen and solved this problem on another system? I can confirm openSUSE 11.2 works fine on my old Acer Aspire One A150, so I assume this is a specific issue on the HP.
View 1 Replies
View Related
Feb 1, 2010
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this:
title System Restore
root (hd0,2)
chainloader +1
boot
This points to a partition which, when mounted, has this stuff in it:
bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz
boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says:
Boot Error
Is there a log or something that might give me more info about the error?
View 5 Replies
View Related
Feb 3, 2010
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
View 3 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Aug 13, 2010
I currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
what do you guys think?
View 4 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Jan 2, 2011
I've installed Debian using the boot.img.gz file onto the jump drive, as well as Linux mint and crunchbang with unetbootin all to no avail; pressing F9 at bios startup refuses to show the jump drive. Booting from the drive is enabled (as far as I can see) in the BIOS.
View 1 Replies
View Related
Jun 9, 2011
I have a hp mini 1033cr. Awhile ago I installed ubuntu netbook edition, well I was new to Ubuntu so I clicked upgrade. Well everything was going good and then it restarted. when I came up to the log in page I typed my password and now it won't boot. it goes to the desktop theme but then freezes with three warning messages.
1st could not update ICEauthority file /home/adam/.ICEauthority
2nd There is a problem with the configuration server. (/usr/lib/libgcond-sanity-check-2 exited with status 256)
3rd Nautilus could not create the following required folders: /home/adam/desktop, /home/adam/.nautilus
I have tried a fresh install with a disc I burnt and ran with my external dvd drive. Well guess what it decided to not boot from it. I have also tried several other discs including a windows xp disc. it always boots back to the hard drive.
View 3 Replies
View Related
Mar 22, 2011
I'm attempting to install ubuntu netbook on my Asus Netbook from a USB and I'm getting the following error as soon as it boots from the USB
"SYSLINUX 4.03 2010-10-22 EDD Load error - Boot error"
View 1 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
Apr 10, 2011
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Oct 18, 2010
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
View 9 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
